48 V input rad-hard DCDC converters for HEP experiments: development and results

Two new radiation-hard DCDC converters are in development, which tolerate a higher input voltage (up to 48 V) and provide a larger output power compared to existing solutions. They are called bPOL48V and rPOL48V, and they employ gallium nitride devices. bPOL48V can provide 10 A of output current with better than 90% efficiency and is close to production readiness, while rPOL48V is in an early stage of development and is designed to provide larger output current with better power density. A linear regulator called linPOL48V, able step down the voltage from up to 48 V with maximum output current of 200 mA has also been designed and tested

48 v input rad-hard DCDC converters for HEP experiments: Development and results

Two new radiation-hard DCDC converters are in development, which tolerate a higher input voltage (up to 48 V) and provide a larger output power compared to existing solutions. They are called bPOL48V and rPOL48V, and they employ gallium nitride devices. bPOL48V can provide 10 A of output current with better than 90% efficiency and is close to production readiness, while rPOL48V is in an early stage of development and is designed to provide larger output current with better power density. A linear regulator called linPOL48V, able step down the voltage from up to 48 V with maximum output current of 200 mA has also been designed and tested

RPOL2V5: A compact radiation-hard resonant switched-capacitor DC-DC converter for the CMS HGCAL

A radiation-tolerant resonant switched-capacitor DC-DC converter (rPOL2V5) has been developed to supply the front-end analog and digital circuits for the detectors used in the LHC High Luminosity upgrades. It has been of particular interest to the CMS High-Granularity Calorimeter (HGCAL) community due to its lower volume compared to existing radiation-hard buck converters. rPOL2V5 is based on an ASIC developed using 130 nm CMOS technology. It is powered by a 2.5 V input and it can supply a maximum current from 2 A to 5 A, depending on the output voltage value, which can range from 1 V to 1.5 V. This work presents the strategies adopted at the ASIC and PCB level to bring the converter to maturity, and its electrical and radiation characterisation results

Strategic R&D Programme on Technologies for Future Experiments - Annual Report 2021

This report summarises the activities and main achievements of the CERN strategic R&D programme on technologies for future experiments during the year 2021

Annual Report 2022

This report summarises the activities and main achievements of the CERN strategic R&D programme on technologies for future experiments during the year 202

Extension of the R&D Programme on Technologies for Future Experiments

we have conceived an extension of the R&D programme covering the period 2024 to 2028, i.e. again a 5-year period, however with 2024 as overlap year. This step was encouraged by the success of the current programme but also by the Europe-wide efforts to launch new Detector R&D collaborations in the framework of the ECFA Detector R&D Roadmap. We propose to continue our R&D programme with the main activities in essentially the same areas. All activities are fully aligned with the ECFA Roadmap and in most cases will be carried out under the umbrella of one of the new DRD collaborations. The program is a mix of natural continuations of the current activities and a couple of very innovative new developments, such as a radiation hard embedded FPGA implemented in an ASIC based on System-on-Chip technology. A special and urgent topic is the fabrication of Al-reinforced super-conducting cables. Such cables are a core ingredient of any new superconducting magnet such as BabyIAXO, PANDA, EIC, ALICE-3 etc. Production volumes are small and demands come in irregular intervals. Industry (world-wide) is no longer able and willing to fabricate such cables. The most effective approach (technically and financially) may be to re-invent the process at CERN, together with interested partners, and offer this service to the community