Flight test results from a supercritical mission adaptive wing with smooth variable camber

The mission adaptive wing (MAW) consisted of leading- and trailing-edge variable-camber surfaces that could be deflected in flight to provide a near-ideal wing camber shape for any flight condition. These surfaces featured smooth, flexible upper surfaces and fully enclosed lower surfaces, distinguishing them from conventional flaps that have discontinuous surfaces and exposed or semiexposed mechanisms. Camber shape was controlled by either a manual or automatic flight control system. The wing and aircraft were extensively instrumented to evaluate the local flow characteristics and the total aircraft performance. This paper discusses the interrelationships between the wing pressure, buffet, boundary-layer and flight deflection measurement system analyses and describes the flight maneuvers used to obtain the data. The results are for a wing sweep of 26 deg, a Mach number of 0.85, leading and trailing-edge cambers (delta(sub LE/TE)) of 0/2 and 5/10, and angles of attack from 3.0 deg to 14.0 deg. For the well-behaved flow of the delta(sub LE/TE) = 0/2 camber, a typical cruise camber shape, the local and global data are in good agreement with respect to the flow properties of the wing. For the delta(sub LE/TE) = 5/10 camber, a maneuvering camber shape, the local and global data have similar trends and conclusions, but not the clear-cut agreement observed for cruise camber

Room temperature magneto-optic effect in silicon light-emitting diodes

In weakly spin-orbit coupled materials, the spin-selective nature of recombination can give rise to large magnetic-field effects, for example on electro-luminescence from molecular semiconductors. While silicon has weak spin-orbit coupling, observing spin-dependent recombination through magneto-electroluminescence is challenging due to the inefficiency of emission due to silicon's indirect band-gap, and to the difficulty in separating spin-dependent phenomena from classical magneto-resistance effects. Here we overcome these challenges to measure magneto-electroluminescence in silicon light-emitting diodes fabricated via gas immersion laser doping. These devices allow us to achieve efficient emission while retaining a well-defined geometry thus suppressing classical magnetoresistance effects to a few percent. We find that electroluminescence can be enhanced by up to 300\% near room temperature in a seven Tesla magnetic field showing that the control of the spin degree of freedom can have a strong impact on the efficiency of silicon LEDs

Using Simulation to Model Time Utilization of Army Recruiters

It is a well-known fact Army recruiters work very long hours in a demanding environment. In many cases, recruiting stations are geographically isolated from military bases, with recruiters often tolerating a high cost of living, crime, and other such adverse conditions that characterize the communities they work in. The job itself demands self-starting, motivated individuals with a wide range of skills, from street-savvy to salesmanship, in order to succeed. A number of factors in recent years have made military recruiting more difficult, which include scandals involving highly-placed soldiers and changes in attitudes towards military service among eligible men and women. A recent mission increase has exacerbated this problem even further for the many recruiters who must shoulder this burden. Unlike previous studies which have concentrated on the effects of advertisements and other determinants of enlistments in the Army, this study instead focuses on the individual recruiters themselves, with the ultimate purpose of defining the relationship between the various recruiter tasks and the end product - qualified Army recruits. The key step towards the accomplishment of this goal was the determination of which factors influence recruiter effectiveness. In the course of developing a model and subsequent computer simulation of the recruiting process, a thorough process flow description of the major recruiter tasks was generated. Task completion times were estimated on the basis of empirical studies of actual recruiting stations in anticipation of their use as model input parameters. All of this information was then incorporated into working Simprocess and ModSim computer simulations of a single recruiting station with an arbitrary number of recruiters

A Physiology-Based Gap Model of Forest Dynamics

A computer model of forest growth and ecosystem processes is presented. The model, HYBRID, is derived from a forest gap model, an ecosystem process model, and a photosynthesis model. In HYBRID individual trees fix and respire carbon, and lose water daily; carbon partioning occurs at the end of each year. HYBRID obviates many of the linitations of both gap models and ecosystem process models. The growth equations of gap models are replaced with functionally realistic equations and processes for carbon fixation and partitioning, resulting in a dynamic model in which competition and physiology play important roles. The model is used to predict ecosystem processes and dynamics in oak forests in Knoxville, Tennessee (USA), and pine forests in Missoula, Montana (USA) between the years 1910 and 1986. The simulated growth of individual trees and the overall ecosystems—level processes are very similiar to observations. A sensitivity analysis performed for these sites showed that predictions of net primary productivity by HBRID are most sensitive to the ratio of CO2 partial pressure between inside the leaf and the air, relative humidity, ambient CO2 partial pressure, precipitation, air temperature, tree allometry, respiration parametes, site soil water capacity, and a carbon storage parameter

A hydrodynamic scheme for two-component winds from hot stars

We have developed a time-dependent two-component hydrodynamics code to simulate radiatively-driven stellar winds from hot stars. We use a time-explicit van Leer scheme to solve the hydrodynamic equations of a two-component stellar wind. Dynamical friction due to Coulomb collisions between the passive bulk plasma and the line-scattering ions is treated by a time-implicit, semi-analytic method using a polynomial fit to the Chandrasekhar function. This gives stable results despite the stiffness of the problem. This method was applied to model stars with winds that are both poorly and well-coupled. While for the former case we reproduce the mCAK solution, for the latter case our solution leads to wind decoupling.Comment: accepted to Astronomy and Astrophysic

Communications and control for electric power systems

The first section of the report describes the AbNET system, a hardware and software communications system designed for distribution automation (it can also find application in substation monitoring and control). The topology of the power system fixes the topology of the communications network, which can therefore be expected to include a larger number of branch points, tap points, and interconnections. These features make this communications network unlike any other. The network operating software has to solve the problem of communicating to all the nodes of a very complex network in as reliable a way as possible even if the network is damaged, and it has to do so with minimum transmission delays and at minimum cost. The design of the operating protocols is described within the framework of the seven-layer Open System Interconnection hierarchy of the International Standards Organization. Section 2 of the report describes the development and testing of a high voltage sensor based on an electro-optic polymer. The theory of operation is reviewed. Bulk fabrication of the polymer is discussed, as well as results of testing of the electro-optic coefficient of the material. Fabrication of a complete prototype sensor suitable for use in the range 1-20 kV is described. The electro-optic polymer is shown to be an important material for fiber optic sensing applications. Appendix A is theoretical support for this work. The third section of the report presents the application of an artificial neural network, Kohonen's self-organizing feature map, for the classification of power system states. This classifier maps vectors of an N-dimensional space to a 2-dimensional neural net in a nonlinear way preserving the topological order of the input vectors. These mappings are studied using a nonlinear power system model

A high-finesse Fabry-Perot cavity with a frequency-doubled green laser for precision Compton polarimetry at Jefferson Lab

A high-finesse Fabry-Perot cavity with a frequency-doubled continuous wave green laser (532~nm) has been built and installed in Hall A of Jefferson Lab for high precision Compton polarimetry. The infrared (1064~nm) beam from a ytterbium-doped fiber amplifier seeded by a Nd:YAG nonplanar ring oscillator laser is frequency doubled in a single-pass periodically poled MgO:LiNbO$_{3}$ crystal. The maximum achieved green power at 5 W IR pump power is 1.74 W with a total conversion efficiency of 34.8\%. The green beam is injected into the optical resonant cavity and enhanced up to 3.7~kW with a corresponding enhancement of 3800. The polarization transfer function has been measured in order to determine the intra-cavity circular laser polarization within a measurement uncertainty of 0.7\%. The PREx experiment at Jefferson Lab used this system for the first time and achieved 1.0\% precision in polarization measurements of an electron beam with energy and current of 1.0~GeV and 50~$\mu$A.Comment: 20 pages, 22 figures, revised version of arXiv:1601.00251v1, submitted to NIM