Study of personal hygiene concepts for future manned missions Final report

Personal hygiene concepts for long-duration manned space fligh

Breadboard linear array scan imager using LSI solid-state technology

The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained

A study of the mechanisms of corrosion inhibition of AA2024-T3 by vanadates using the split cell technique

The mechanisms of corrosion inhibition of AA2024-T3 by vanadates were studied in this work using the split cell technique and polarization curves. The electrochemical behavior of clear solutions containing metavanadates and orange solutions containing decavanadates was clearly distinctive. Injection of metavanadates to the cathode side of the different split cell setups greatly reduced the galvanic current, indicating a potent inhibition of the oxygen reduction kinetics. The galvanic current never exhibited a transient current peak, suggesting that metavanadates inhibit AA2024-T3 corrosion by a mechanism that does not involve electrochemical reduction. Injection of metavanadate to the anode side of the different split cells had no effect on the galvanic current. Injection of orange decavanadate to the cathode side of the AA2024-T3 split cell resulted in a large current peak, associated with the electrochemical reduction of decavanadate. However, decavanadates did not impart significant corrosion protection.This work was partially funded by AFOSR under award F 49620-02-0321, Major J. Gresham, PhD, contract monitor. JK’s travel expenses were paid by NATO under grant PST.CLG.979370

Analytic solutions of the 1D finite coupling delta function Bose gas

An intensive study for both the weak coupling and strong coupling limits of the ground state properties of this classic system is presented. Detailed results for specific values of finite $N$ are given and from them results for general $N$ are determined. We focus on the density matrix and concomitantly its Fourier transform, the occupation numbers, along with the pair correlation function and concomitantly its Fourier transform, the structure factor. These are the signature quantities of the Bose gas. One specific result is that for weak coupling a rational polynomial structure holds despite the transcendental nature of the Bethe equations. All these new results are predicated on the Bethe ansatz and are built upon the seminal works of the past.Comment: 23 pages, 0 figures, uses rotate.sty. A few lines added. Accepted by Phys. Rev.

Oxidation of Zr-2.5 Nb Nuclear Reactor Pressure Tubes A New Model

The corrosion and associated deuterium (D) uptake of Zr alloy nuclear reactor pressure tubes have been studied for over 40 years. Zircaloy tubes exhibit rapid D ingress after a period of in-reactor exposure, and have been replaced with tubes fabricated from the more resistant Zr-2.5 wt % Nb alloy. Recently, however, a small percentage of Zr-2.5 Nb tubes have been found to contain high D contents. There is currently no clear understanding of the mechanism for this increased D uptake, and concern exists that an increasing number of high-D tubes will develop with time. A new model for Zr-2.5 Nb corrosion is presented in this paper. The rate of corrosion is shown to be dependent on the rate of transformation of the protective inner oxide layer (closer to the metal) to a porous outer layer. The mechanism of this transformation is not known and should be the subject of future investigations. It is assumed in the model that zirconia chemically dissolves into the solution at the pore bottom. The rate of this dissolution reaction depends on the local pH, which increases if there is a buildup of deuteroxyl ions generated in the cathodic part of the Zr corrosion reaction. A mathematical description of this model, containing several parameters with unknown values, is presented. Assigning certain values to these parameters results in predictions of oxide formation (and thus D buildup) that correspond well with observations.Support of this work by the Atomic Energy Control Board under AECB project no. 2.349.1 is gratefully acknowledged

"Marginal pinching" in soap films

We discuss the behaviour of a thin soap film facing a frame element: the pressure in the Plateau border around the frame is lower than the film pressure, and the film thins out over a certain distance lambda(t), due to the formation of a well-localized pinched region of thickness h(t) and extension w(t). We construct a hydrodynamic theory for this thinning process, assuming a constant surface tension: Marangoni effects are probably important only at late stages, where instabilitites set in. We find lambda(t) ~ t^{1/4}, and for the pinch dimensions h(t) ~ t^{-1/2}$ and w(t) ~ t^{-1/4}. These results may play a useful role for the discussion of later instabilitites leading to a global film thinning and drainage, as first discussed by K. Mysels under the name ``marginal regeneration''.Comment: 7 pages, 2 figure

Repassivation of Pits in Aluminum Thin Films

The effect of metal film thickness on repassivation of pits in sputter-deposited Al thin films was investigated in chloride solutions. The repassivation potential and the critical current density, which is the pit current density below which pits stop growing, were determined for pits in Al thin films ranging from 100 Ǻ to 43 μm in thickness. The repassivation potential first decreased as thickness increased from 100 to 4350 Ǻ, and then increased as the film thickness increased further. This behavior was found to be a consequence of the pit current-density/potential relationship. The critical current density, a more informative parameter, decreased for increasing metal film thickness, even when the repassivation potential increased. The critical current density is the minimum current density needed to maintain the critical pit environment and prevent repassivation. The repassivation potential for a given metal film thickness is the potential at which the pit current density drops below the critical value. Mass-transport and ohmic resistance both increase as the metal film thickness increases, but the former enhances pit stability and the latter destabilizes pitting in this system. Pit repassivation, and thus stability, are strongly influenced by mass-transport considerations for pits in very thin pits, even though dissolution at low potentials is not under pure mass-transport control. Ohmic effects become increasingly important as the film thickness increases.J.R.S. was supported by the NASA-Langley Research Center La^2ST Program and the NSF under DMR-9357463

Energy-momentum conservation in pre-metric electrodynamics with magnetic charges

A necessary and sufficient condition for energy-momentum conservation is proved within a topological, pre-metric approach to classical electrodynamics including magnetic as well as electric charges. The extended Lorentz force, consisting of mutual actions by F=(E, B) on the electric current and G=(H, D) on the magnetic current, can be derived from an energy-momentum "potential" if and only if the constitutive relation G=G(F) satisfies a certain vanishing condition. The electric-magnetic reciprocity introduced by Hehl and Obukhov is seen to define a complex structure on the tensor product of 2-form pairs (F,G) which is independent of but consistent with the Hodge star operator defined by any Lorentzian metric. Contrary to a recent claim in the literature, it does not define a complex structure on the space of 2-forms itself.Comment: 8 pages, 1 fugur

Hodge Dual for Soldered Bundles

In order to account for all possible contractions allowed by the presence of the solder form, a generalized Hodge dual is defined for the case of soldered bundles. Although for curvature the generalized dual coincides with the usual one, for torsion it gives a completely new dual definition. Starting from the standard form of a gauge lagrangian for the translation group, the generalized Hodge dual yields precisely the lagrangian of the teleparallel equivalent of general relativity, and consequently also the Einstein-Hilbert lagrangian of general relativity.Comment: 8 pages, no figures. Accepted for publication in Journal of Physics

Asymptotic corrections to the eigenvalue density of the GUE and LUE

We obtain correction terms to the large N asymptotic expansions of the eigenvalue density for the Gaussian unitary and Laguerre unitary ensembles of random N by N matrices, both in the bulk of the spectrum and near the spectral edge. This is achieved by using the well known orthogonal polynomial expression for the kernel to construct a double contour integral representation for the density, to which we apply the saddle point method. The main correction to the bulk density is oscillatory in N and depends on the distribution function of the limiting density, while the corrections to the Airy kernel at the soft edge are again expressed in terms of the Airy function and its first derivative. We demonstrate numerically that these expansions are very accurate. A matching is exhibited between the asymptotic expansion of the bulk density, expanded about the edge, and the asymptotic expansion of the edge density, expanded into the bulk.Comment: 14 pages, 4 figure