Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office

An installation in a Federal building tested the effectiveness of a highly-controlled, workstation-specific lighting retrofit. The study took place in an open-office area with 86 cubicles and low levels of daylight. Each cubicle was illuminated by a direct/indirectpendant luminaire with three 32 watt lamps, two dimmable DALI ballasts, and an occupancy sensor. A centralized control system programmed all three lamps to turn on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several monthsdemonstrated 40% lighting energy savings compared to a baseline without advanced controls that conforms to GSA's current retrofit standard. A photometric analysis found that the installation provided higher desktop light levels than the baseline, while an occupant survey found that occupants in general preferred the lighting system to thebaseline.Simple payback is fairly high; projects that can achieve lower installation costs and/or higher energy savings and those in which greenhouse gas reduction and occupant satisfaction are significant priorities provide the ideal setting for workstation-specific lighting retrofits

Theoretical description of a DNA-linked nanoparticle self-assembly

Nanoparticles tethered with DNA strands are promising building blocks for bottom-up nanotechnology, and a theoretical understanding is important for future development. Here we build on approaches developed in polymer physics to provide theoretical descriptions for the equilibrium clustering and dynamics, as well as the self-assembly kinetics of DNA-linked nanoparticles. Striking agreement is observed between the theory and molecular modeling of DNA tethered nanoparticles.Comment: Accepted for publication in Physical Review Letter

Using Dimmable Lighting for Regulation Capacity and Non-Spinning Reserves in the Ancillary Services Market. A Feasibility Study.

The objective of this Feasibility Study was to identify the potential of dimmable lighting for providing regulation capacity and contingency reserves if massively-deployed throughout the State. We found that one half of the total electric lighting load in the California commercial sector is bottled up in larger buildings that are greater an 50,000 square feet. Retrofitting large California buildings with dimmable lighting to enable fast DR lighting would require an investment of about $1.8 billion and a"fleet" of about 56 million dimming ballasts. By upgrading the existing installed base of lighting and controls (primarily in large commercial facilities) a substantial amount of ancillary services could be provided. Though not widely deployed, today's state-of-the art lighting systems, control systems and communication networks could be used for this application. The same lighting control equipment that is appropriate for fast DR is also appropriate for achieving energy efficiency with lighting on a daily basis. Thus fast DR can leverage the capabilities that are provided by a conventional dimming lighting control system. If dimmable lighting were massively deployed throughout large California buildings (because mandated by law, for example) dimmable lighting could realistically supply 380 MW of non-spinning reserve, 47percent of the total non-spinning reserves needed in 2007

Preliminary results from an advanced lighting controls testbed

Abstract Preliminary results from a large-scale testbed of advanced lighting control technologies at the Phillip Burton Federal Building at 450 Golden Gate Ave. in San Francisco are presented. The first year objective of this project is to determine the sustainable energy savings and cost-effectiveness of different lighting control technologies compared to a portion of the building where only minimal controls are installed. The paper presents the analyzed results from six months of tests focused on accurately characterizing the energy savings potential of one type of daylight-linked lighting controls compared to the lighting in similar open-planned areas without dimming controls. After analyzing a half year's data, we determined that the annual energy savings for this type of daylightlinked controls was 41% and 30% for the outer rows of lights on the South and North sides of the building, respectively. The annual energy savings dropped to 22% and 16% for the second row of lights for the South and North, respectively, and was negligible for the third rows of lights

LBNL-47022 Occupancy and Time-Based Lighting Controls in Open Offices

Abstract We present analyses of two years' lighting data in open office areas, controlled by occupant sensors, time scheduling, or wall switches alone. We compare the energy savings using a before-after analysis of time scheduling and a conservative "moving baseline" analysis of both occupant sensing and time scheduling. We found that both techniques saved energy effectively when no occupants were present compared with wall switches alone. Time scheduling saved from 0.7 to 6.6% or an average of about 5%. Occupant sensors in similar areas saved from 9.0 to 14.6%, with an average of about 10%. False triggering of occupant sensors (by passersby) that would have caused energy waste was avoided by the presence of wall switches that positively turned lights off. Variations in occupant schedules and habits affected overall lighting energy use and the appropriateness of different control types. Little savings were found during the normal 8am to 5pm workday from either technology in large offices, but significant savings occurred after hours and on weekends. Our findings contrast with previous results for private offices in which only a single occupant is present, strengthening the evidence that different types of office space can be controlled appropriately with different types of control systems. However, small percentage savings in open areas result in larger actual savings due to the large number of fixtures controlled

Creation of dense polymer brush layers by the controlled deposition of an amphiphilic responsive comb polymer

We introduce a copolymer with a comb topology that has been engineered to assemble in a brush configuration at an air-water interface. The molecule comprises a 6.1 kDa poly(methyl methacrylate) backbone with a statistical amount of poly[2-(dimethyl amino)ethyl methacrylate] polybase side chains averaging 2.43 per backbone.. Brush layers deposited with the hydrophobic PMMA backbone adsorbed to hydrophobized silicon are stable in water even when stored at pH values less than 2.0 for over 24 h. The use of a Langmuir trough allows a simple controlled deposition of the layers at a variety of grafting densities. Depth profiling of brush layers was performed using neutron reflectometry and reveals a significant shifting of the responsiveness of the layer upon changing the grafting density. The degree of swelling of the layers at a pH value of 4 (below the pK(b)) decreases as grafting density increases. Lowering the pH of the subphase during deposition causes the side chains to become charged and more hydrophilic extending to a brush-like configuration while at neutral pH the side chains lie in a "pancake" conformation at the interface. (C) 2009 Elsevier Ltd. All rights reserved

Barrier Immune Radio Communications for Demand Response

Various wireless technologies were field-tested in a six-story laboratory building to identify wireless technologies that can scale for future DR applications through very low node density power consumption, and unit cost. Data analysis included analysis of the signal-to-noise ratio (SNR), packet loss, and link quality at varying power levels and node densities. The narrowband technologies performed well, penetrating the floors of the building with little loss and exhibiting better range than the wideband technology. 900 MHz provided full coverage at 1 watt and substantially complete coverage at 500 mW at the test site. 900 MHz was able to provide full coverage at 100 mW with only one additional relay transmitter, and was the highest-performing technology in the study. 2.4 GHz could not provide full coverage with only a single transmitter at the highest power level tested (63 mW). However, substantially complete coverage was provided at 2.4 GHz at 63 mW with the addition of one repeater node

Patrolling security games: Definition and algorithms for solving largeinstances with single patroller and single intruder

Security games are gaining significant interest in artificial intelligence. They are characterized by two players (a defender and an attacker) and by a set of targets the defender tries to protect from the attacker\u2bcs intrusions by committing to a strategy. To reach their goals, players use resources such as patrollers and intruders. Security games are Stackelberg games where the appropriate solution concept is the leader\u2013follower equilibrium. Current algorithms for solving these games are applicable when the underlying game is in normal form (i.e., each player has a single decision node). In this paper, we define and study security games with an extensive-form infinite-horizon underlying game, where decision nodes are potentially infinite. We introduce a novel scenario where the attacker can undertake actions during the execution of the defender\u2bcs strategy. We call this new game class patrolling security games (PSGs), since its most prominent application is patrolling environments against intruders. We show that PSGs cannot be reduced to security games studied so far and we highlight their generality in tackling adversarial patrolling on arbitrary graphs. We then design algorithms to solve large instances with single patroller and single intruder

The AMANDA Neutrino Telescope and the Indirect Search for Dark Matter

With an effective telescope area of order 10^4 m^2, a threshold of ~50 GeV and a pointing accuracy of 2.5 degrees, the AMANDA detector represents the first of a new generation of high energy neutrino telescopes, reaching a scale envisaged over 25 years ago. We describe its performance, focussing on the capability to detect halo dark matter particles via their annihilation into neutrinos.Comment: Latex2.09, 16 pages, uses epsf.sty to place 15 postscript figures. Talk presented at the 3rd International Symposium on Sources and Detection of Dark Matter in the Universe (DM98), Santa Monica, California, Feb. 199

Simplicity in Visual Representation: A Semiotic Approach

Simplicity, as an ideal in the design of visual representations, has not received systematic attention. High-level guidelines are too general, and low-level guidelines too ad hoc, too numerous, and too often incompatible, to serve in a particular design situation. This paper reviews notions of visual simplicity in the literature within the analytical framework provided by Charles Morris' communication model, specifically, his trichotomy of communication levels—the syntactic, the semantic, and the pragmatic. Simplicity is ultimate ly shown to entail the adjudication of incompatibilities both within, and between, levels.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68281/2/10.1177_105065198700100103.pd