Mechanical loss in state-of-the-art amorphous optical coatings

We present the results of mechanical characterizations of many different high-quality optical coatings made of ion-beam-sputtered titania-doped tantala and silica, developed originally for interferometric gravitational-wave detectors. Our data show that in multi-layer stacks (like high-reflection Bragg mirrors, for example) the measured coating dissipation is systematically higher than the expectation and is correlated with the stress condition in the sample. This has a particular relevance for the noise budget of current advanced gravitational-wave interferometers, and, more generally, for any experiment involving thermal-noise limited optical cavities.Comment: 31 pages, 14 figure

Measurements of mechanical thermal noise and energy dissipation in optical dielectric coatings

In recent years an increasing number of devices and experiments are shown to be limited by mechanical thermal noise. In particular sub-Hertz laser frequency stabilization and gravitational wave detectors, that are able to measure fluctuations of 1E-18 m/rtHz or less, are being limited by thermal noise in the dielectric coatings deposited on mirrors. In this paper we present a new measurement of thermal noise in low absorption dielectric coatings deposited on micro-cantilevers and we compare it with the results obtained from the mechanical loss measurements. The coating thermal noise is measured on the widest range of frequencies with the highest signal to noise ratio ever achieved. In addition we present a novel technique to deduce the coating mechanical losses from the measurement of the mechanical quality factor which does not rely on the knowledge of the coating and substrate Young moduli. The dielectric coatings are deposited by ion beam sputtering. The results presented here give a frequency independent loss angle of (4.70 $\pm$ 0.2)x1E-4 with a Young's modulus of 118 GPa for annealed tantala from 10 Hz to 20 kHz. For as-deposited silica, a weak frequency dependence (~ f^{-0.025}) is observed in this frequency range, with a Young's modulus of 70 GPa and an internal damping of (6.0 $\pm$ 0.3)x1E-4 at 16 kHz, but this value decreases by one order of magnitude after annealing and the frequency dependence disappears.Comment: Accepted for publication in Phys. Rev.

Characterization of Core Optics in Gravitational-Wave Detectors: Case Study of KAGRA Sapphire Mirrors

We report the characterization of superlow-loss optics used in the second-generation gravitational-wave detectors currently in operation. The sapphire test-mass mirrors in the KAGRA detector are introduced as an example, but the techniques here are common to all detectors. In this work, we discuss mainly the surface topography obtained by interferometric techniques and the optical properties obtained with special setups

Measurement of the optical absorption of bulk silicon at cryogenic temperature and the implication for the Einstein Telescope

International audienceWe report in this article on the measurement of the optical absorption of moderately doped crystalline silicon samples at 1550 nm, which is a candidate material for the main optics of the low temperature interferometer of the Einstein Telescope (ET). We observe a nearly constant absorption from room temperature down to cryogenic temperatures for two silicon samples presenting an optical absorption of 0.029 cm −1 and 780 ppm cm −1 , both crystals doped with boron. This is in contradiction to what was assumed previously—a negligible optical absorption at low temperature due to the carrier freezeout. As the main consequence, if the silicon intrinsic absorption can not be lowered , the cross section of the mirror suspension of the ET must be increased to be able to carry away the excess heat generated by the partially absorbed laser beam during the operation of the interferometer

Death and the Societies of Late Antiquity

Ce volume bilingue, comprenant un ensemble de 28 contributions disponibles en français et en anglais (dans leur version longue ou abrégée), propose d’établir un état des lieux des réflexions, recherches et études conduites sur le fait funéraire à l’époque tardo-antique au sein des provinces de l’Empire romain et sur leurs régions limitrophes, afin d’ouvrir de nouvelles perspectives sur ses évolutions possibles. Au cours des trois dernières décennies, les transformations considérables des méthodologies déployées sur le terrain et en laboratoire ont permis un renouveau des questionnements sur les populations et les pratiques funéraires de l’Antiquité tardive, période marquée par de multiples changements politiques, sociaux, démographiques et culturels. L’apparition de ce qui a été initialement désigné comme une « Anthropologie de terrain », qui fut le début de la démarche archéothanatologique, puis le récent développement d’approches collaboratives entre des domaines scientifiques divers (archéothanatologie, biochimie et géochimie, génétique, histoire, épigraphie par exemple) ont été décisives pour le renouvellement des problématiques d’étude : révision d’anciens concepts comme apparition d’axes d’analyse inédits. Les recherches rassemblées dans cet ouvrage sont articulées autour de quatre grands thèmes : l’évolution des pratiques funéraires dans le temps, l’identité sociale dans la mort, les ensembles funéraires en transformation (organisation et topographie) et les territoires de l’empire (du cœur aux marges). Ces études proposent un réexamen et une révision des données, tant anthropologiques qu’archéologiques ou historiques sur l’Antiquité tardive, et révèlent, à cet égard, une mosaïque de paysages politiques, sociaux et culturels singulièrement riches et complexes. Elles accroissent nos connaissances sur le traitement des défunts, l’emplacement des aires funéraires ou encore la structure des sépultures, en révélant une diversité de pratiques, et permettent au final de relancer la réflexion sur la manière dont les sociétés tardo-antiques envisagent la mort et sur les éléments permettant d’identifier et de définir la diversité des groupes qui les composent. Elles démontrent ce faisant que nous pouvons véritablement appréhender les structures culturelles et sociales des communautés anciennes et leurs potentielles transformations, à partir de l’étude des pratiques funéraires.This bilingual volume proposes to draw up an assessment of the recent research conducted on funerary behavior during Late Antiquity in the provinces of the Roman Empire and on their borders, in order to open new perspectives on its possible developments. The considerable transformations of the methodologies have raised the need for a renewal of the questions on the funerary practices during Late Antiquity, a period marked by multiple political, social, demographic and cultural changes. The emergence field anthropology, which was the beginning of archaeothanatology, and then the recent development of collaborative approaches between various scientific fields (archaeothanatology, biochemistry and geochemistry, genetics, history, epigraphy, for example), have been decisive. The research collected in this book is structured around four main themes: Evolution of funerary practices over time; Social identity through death; Changing burial grounds (organisation and topography); Territories of the Empire (from the heart to the margins). These studies propose a review and a revision of the data, both anthropological and archaeological or historical on Late Antiquity, and reveal a mosaic of political, social, and cultural landscapes singularly rich and complex. In doing so, they demonstrate that we can truly understand the cultural and social structures of ancient communities and their potential transformations, based on the study of funerary practices

Thinking creatively to innovate: a study of the genesis of a mathematical breakthrough by Cédric Villani

International audienc

Partial 17,20-desmolase and 17α-hydroxylase deficiencies in a 16-year-old boy

Thirteen plasma steroids as well as ACTH, LH and FSH were measured by specific RIAs under basal and dynamic conditions in a 16-year-old boy (normal external genitalia, 46, XY (karyotype) who presented slowness and unachievement of pubertal development. On the Δ4-pathway: basal levels of testosterone and dihydrotestosterone were low - with a normal ratio-, Δ4-androstenedione and 11β-hydroxyandrostenedione were in the low normal range. Meanwhile, 17α-hydroxyprogesterone and progesterone levels were markedly elevated. On the Δ5-pathway: dehydroepiandrosterone was extremely low while 17α-hydroxypregnenolone and pregnenolone were almost normal; dehydroepiandrosterone sulfate was subnormal while pregnenolone sulfate was normal. Cortisol, aldosterone were normal while ACTH was moderately increased. Basal and responsive levels of LH and FSH were markedly increased. ACTH stimulation induced a subnormal rise of cortisol and 11β-hydroxandrostenedione, a low or absent rise of dehydroepiandrosterone, 17α-hydroxypregnenolone, androstenedione and 17α-hydroxyprogesterone contrasting with a marked rise of pregnenolone and progesterone. After hCG stimulation, responses were low for testosterone, extremely high for 17α-hydroxyprogesterone with a normalisation of the 17α-hydroxyprogesterone/progesterone ratio. Fluoxymesterone dramatically reduced the pathologically high basal levels of progesterone and 17α-hydroxyprogesterone. Dexamethasone induced only a minute decrease in the Δ4-progestagens, a marked decrease in pregnenolone, with a more than 80% reduction of 17α-hydroxypregnenolone, dehydroepiandrosterone, dehydroepiandrosterone sulfate and androstenedione. These data suggest a defect involving the cytochrome P450 common to both 17α-hydroxylase and 17,20-desmolase activities. In the testis, the alteration is already present in basal state and mainly expressed in its 17,20-desmolase activity whereas in the adrenal, it is only expressed in its 17α-hydroxylase component. The different behavior of adrenals and testes regarding this common defect is probably due to local factors affecting specifically the tissue expression of the enzyme.SCOPUS: ar.jinfo:eu-repo/semantics/publishe

TiO2 doping effect on reflective coating mechanical loss for gravitational wave detection at low temperature

International audienceWe measured the mechanical loss of a dielectric multilayer reflective coating (ion-beam-sputtered SiO2 and Ta2O5) with and without TiO2 on sapphire disks between 6 and 77 K. The measured loss angle exhibited a temperature dependence, and the local maximum was found at approximately 20 K. This maximum was 7.0*10^(-4) (with TiO2) and 7.7*10^(-4) (without TiO2), although the previous measurement for the coating on sapphire disks showed almost no temperature dependence (Phys. Rev. D 74 022002 (2006)). We evaluated the coating thermal noise in KAGRA and discussed future investigation strategies

Large and extremely low loss: the unique challenges of gravitational wave mirrors

International audienceThis paper describes the making of large mirrors for laser interferometer gravitational wave detectors. These optics, working in the near infrared, are among the best optics ever created and played a crucial role in the first direct detection of gravitational waves from black holes or neutron star fusions