103 research outputs found

    Overview of global scale research Doppler lidar activities

    Get PDF
    Efforts in support of a global backscatter mission are reviewed briefly. Lidar system sensitivity was calibrated by means of ground-based tests. The analysis of ground-based data and planning of a global backscatter mission were conducted. Proposals for FY-85 include using a more powerful laser to conduct backscatter measurements

    An experimental investigation of convection in a fluid that exhibits phase change

    Get PDF
    Convection flows were systematically observed in a layer of fluid between two isothermal horizontal boundaries. The working fluid was a nematic liquid crystal, which exhibits a liquid-liquid phase change at which latent heat is released and the density changed. In addition to ordinary Rayleigh-Benard convection when either phase is present alone, there exist two types of convective motions initiated by the unstable density difference. When a thin layer of heavy fluid is present near the top boundary, hexagons with downgoing centers exist with no imposed thermal gradient. When a thin layer of light fluid is brought on near the lower boundary, the hexagons have upshooting centers. In both cases, the motions are kept going once they are initiated by the instability due to release of latent heat. Relation of the results to applicable theories is discussed

    Overview of mesocale research Doppler lidar activities

    Get PDF
    In evaluating the performance of the airborne Doppler lidar system, a large number of deficiencies or mistakes were identified in the original system and experiment plans. All of the known problems were addressed and corrected in the planning and engineering for the fall 1984/spring 1985 ADLS flight series. Thus, the most significant result of the data analysis was the input it has provided to the preparations for the new experiment. Attitude measurements are taken together with the streamlined operating procedures, color graphics real time displays of data, and better experiment design, the result is a second-generation system that is considerably better than the one used in 1981

    Laboratory and theoretical studies of baroclinic processes

    Get PDF
    An understanding is being developed for processes which may be important in the atmosphere, and the definition and analysis of baroclinic experiments utilizing the geophysical fluid flow cells (GFFC) apparatus in microgravity space flights. Included are studies using numerical codes, theoretical models, and terrestrial laboratory experiments. The numerical modeling is performed in three stages: calculation of steady axisymmetric flow, calculation of fastest-growing linear eigenmodes, and nonlinear effects (first, wave-mean flow interactions, then wave-wave interactions). The code can accommodate cylindrical, spherical, or channel geometry. It uses finite differences in the vertical and meridional directions, and is spectral in the azimuthal. The theoretical work was mostly in the area of effects of topography upon the baroclinic instability problem. The laboratory experiments are performed in a cylindrical annulus which has a temperture gradient imposed upon the lower surface and an approximately isothermal outer wall, with the upper and inner surfaces being nominally thermally insulating

    Doppler lidar signal and turbulence study

    Get PDF
    Comparison of the second moments of the Doppler lidar signal with aircraft and tower measured parameters is being carried out. Lidar binary data tapes were successfully converted to ASCII Code on the VAX 11/780. These data were used to develop the computer programs for analyzing data from the Marshall Space Flight Center field test. Raw lidar amplitude along the first 50 forward and backward beams of Run No. 2, respectively was plotted. Plotting techniques for the same beams except with the amplitude thresholded and range corrected were developed. Plotting routines for the corresponding lidar width of the first 50 forward and backward beams were also established. The relationship between raw lidar amplitude and lidar width was examined. The lidar width is roughly constant for lidar amplitudes less than 120 dB. A field test with the NASA/MSFC ground based Doppler lidar, the instrumented NASA B-57B gust gradient aircraft, and the NASA/MSFC eight tower array was carried out. The data tape for the lidar was received and read. The aircraft data and tower data are being digitized and converted to engineering units. Velocities computed sequentially along each of the lidar beams beginning at 16:40:00, May 12, 1983 were plotted for Run No. 1

    Daytime turbulent exchange between the Amazon forest and the atmosphere

    Get PDF
    Detailed observations of turbulence just above and below the crown of the Amazon rain forest during the wet season are presented. The forest canopy is shown to remove high frequency turbulent fluctuations while passing lower frequencies. Filter characteristics of turbulent transfer into the Amazon rain forest canopy are quantified. Simple empirical relations that relate observed turbulent heat fluxes to horizontal wind variance are presented. Changes in the amount of turbulent coupling between the forest and the boundary layer associated with deep convective clouds are presented both as statistical averages and as a series of case studies. These convective processes during the rainy season are shown to alter the diurnal course of turbulent fluxes. In wake of giant coastal systems, no significant heat or moisture fluxes occur for up to a day after the event. Radar data is used to demonstrate that even small raining clouds are capable of evacuating the canopy of substances normally trapped by persistent static stability near the forest floor. Recovery from these events can take more than an hour, even during mid-day. In spite of the ubiquitous presence of clouds and frequent rain during this season, the average horizontal wind speed spectrum is well described by dry CBL similarity hypotheses originally found to apply in flat terrain

    The scale and persistence of soil moisture anomalies as simulated in a global model

    Get PDF
    Short term variability of climate is intimately connected with soil moisture variability. Soil moisture provides the storage and subsequent return to the atmosphere, through evaporation and transpiration, of precipitation anomalies over land. Global Circulation Model (GCM) simulations enable consistent identification of correlations and dynamical connections between the hydrologic variables, many of which are incompletely observed. One way to facilitate understanding with these increasingly intricate models is to perform sensitivity studies in which a boundary condition or process is prescribed. In this study we will report on a sensitivity study in which a GCM with a sophisticated land surface representation is used to investigate soil moisture variability in the model climate. The simulations to be used in this study were made at R15 resolution (approximately 4.5 deg latitude x 7.5 deg longitude) with prescribed sea surface temperatures (SST) in the GENESIS model (Thompson and Pollard, 1994), which is coupled to a Land Surface Transfer model (LSX) at 2 deg x 2 deg resolution (Pollard and Thompson, 1994). All the results represented here were taken from the monthly averages of the model results. The LSX model accounts for the physical effects of vegetation with two layers specified at each grid point. Vegetation attributes such as leaf area indices, fractional cover, leaf albedos, etc., were taken from the global dataset in Dorman and Sellers (1989). A six-layer soil model extends from the surface to 4.25 m depth. SST's were prescribed in two ten year experiments using monthly SST values with the daily value being interpolated from the nearest two months. In the first experiment monthly climatological values were used, and in the second, the Atmospheric Model Intercomparison Project (AMIP) observed SST's for the years 1979 through 1988 were used (Gates, 1992). Thus, the former experiment gives a measure of the intrinsic model variability, to be compared with that of the latter experiment, which includes month-to-month variability due to ocean forcing

    Lidar technology measurements and technology: Report of panel

    Get PDF
    Lidar is ready to make an important contribution to tropospheric chemistry research with a variety of spaceborne measurements that complement the measurements from passive instruments. Lidar can now be considered for near-term and far-term space missions dealing with a number of scientifically important issues in tropospheric chemistry. The evolution in the lidar missions from space are addressed and details of these missions are given. The laser availability for space missions based upon the technical data is assessed
    corecore