Succession of bacterial and fungal communities within biofilms of a chlorinated drinking water distribution system

Understanding the temporal dynamics of multi-species biofilms in Drinking Water Distribution Systems (DWDS) is essential to ensure safe, high quality water reaches consumers after it passes through these high surface area reactors. This research studied the succession characteristics of fungal and bacterial communities un der controlled environmental conditions fully representative of operational DWDS. Microbial communities were observed to increase in complexity after one month of biofilm development but they did not reach stability after three months. Changes in cell numbers were faster at the start of biofilm formation and tended to decrease over time, despite the continuing changes in bacterial community composition. Fungal diversity was markedly less than bacterial diversity and had a lag in responding to temporal dynamics. A core-mixed community of bacteria including Pseudomonas, Massillia and Sphingomonas and the fungi Acremonium and Neocosmopora were present constantly and consistently in the biofilms over time and conditions studied. Monitoring and managing biofilms and such ubiquitous core microbial communities are key control strategies to ensuring the delivery of safe drinking water via the current ageing DWDS infrastructure

Uncharted waters: the unintended impacts of residual chlorine on water quality and biofilms

Disinfection residuals in drinking water protect water quality and public heath by limiting planktonic microbial regrowth during distribution. However, we do not consider the consequences and selective pressures of such residuals on the ubiquitous biofilms that persist on the vast internal surface area of drinking water distribution systems. Using a full scale experimental facility, integrated analyses were applied to determine the physical, chemical and biological impacts of different free chlorine regimes on biofilm characteristics (composition, structure and microbiome) and water quality. Unexpectedly, higher free chlorine concentrations resulted in greater water quality degredation, observable as elevated inorganic loading and greater discolouration (a major cause of water quality complaints and a mask for other failures). High-chlorine concentrations also reduced biofilm cell concentrations but selected for a distinct biofilm bacterial community and inorganic composition, presenting unique risks. The results challenge the assumption that a measurable free chlorine residual necessarily assures drinking water safety

Non-invasive biofouling monitoring to assess drinking water distribution system performance

Biofilms are endemic in drinking water distribution systems (DWDS), forming on all water and infrastructure interfaces. They can pose risks to water quality and hence consumers. Our understanding of these biofilms is limited, in a large part due to difficulties in sampling them without unacceptable disruption. A novel, non-destructive and non-disruptive biofilm monitoring device (BMD), which includes use of flow cytometry analysis, was developed to assess biofouling rates. Laboratory based experiments established optimal configurations and verified reliable cell enumeration. Deployment at three operational field sites validated assessment of different biofouling rates. These differences in fouling rates were not obvious from bulk water sampling and analysis, but did have a strong correlation with long-term performance data of the associated networks. The device offers the potential to assess DWDS performance in a few months, compared to the number of years required to infer findings from historical customer contact data. Such information is vital to improve the management of our vast, complex and uncertain drinking water supply systems; for example rapidly quantifying the benefits of improvements in water treatment works or changes to maintenance of the network

Effects of phosphate and hydrogen peroxide on the performance of a biological activated carbon filter for enhanced biofiltration

Biofilm formation on biofilters can influence their hydraulic performance, thereby leading to head loss and an increase in energy use and costs for water utilities. The effects of a range of factors, including hydrogen peroxide and phosphate, on the performance of biological activated carbon (BAC) and biofilm formation were investigated using laboratory-scale columns. Head loss, total carbohydrates, and proteins were reduced in the nutrient-enhanced, oxidant-enhanced, and nutrient + oxidant-enhanced BAC filters. However, there were no changes in the removal of dissolved organic matter, trihalomethane formation potential, or selected trace organic contaminants. The biofilm formation on polyvinyl chloride and stainless steel coupons using the laboratory biofilm reactor system was lower when the effluent from a nutrient-enhanced column was used, which indicated that there was less biofilm formation in the distribution systems. This may have been because the effluent from the nutrient-enhanced column was more biologically stable. Therefore, enhanced biofiltration could be used not only to reduce head loss in biofilters, but also to delay biofilm formation in distribution systems

Broadband multi-wavelength properties of M87 during the 2017 Event Horizon Telescope campaign

In 2017, the Event Horizon Telescope (EHT) Collaboration succeeded in capturing the first direct image of the center of the M87 galaxy. The asymmetric ring morphology and size are consistent with theoretical expectations for a weakly accreting supermassive black hole of mass ∼6.5 × 109Me. The EHTC also partnered with several international facilities in space and on the ground, to arrange an extensive, quasi-simultaneous multi-wavelength campaign. This Letter presents the results and analysis of this campaign, as well as the multi-wavelength data as a legacy data repository. We captured M87 in a historically low state, and the core flux dominates over HST-1 at high energies, making it possible to combine core flux constraints with the more spatially precise very long baseline interferometry data. We present the most complete simultaneous multi-wavelength spectrum of the active nucleus to date, and discuss the complexity and caveats of combining data from different spatial scales into one broadband spectrum. We apply two heuristic, isotropic leptonic single-zone models to provide insight into the basic source properties, but conclude that a structured jet is necessary to explain M87’s spectrum. We can exclude that the simultaneous γ-ray emission is produced via inverse Compton emission in the same region producing the EHT mm-band emission, and further conclude that the γ-rays can only be produced in the inner jets (inward of HST-1) if there are strongly particle-dominated regions. Direct synchrotron emission from accelerated protons and secondaries cannot yet be excluded.http://iopscience.iop.org/2041-8205am2022Physic

Broadband multi-wavelength properties of M87 during the 2017 Event Horizon Telescope campaign

High Energy AstrophysicsInstrumentatio

Microplastics in aquatic environments – a review of recent advances

Global production and usage of plastics have skyrocket to 368 million tons in 2019, resulting in increasing amounts of plastic waste concentrating in our natural and urban ecosystems (especially rivers and oceans), via landfill, incineration, or illegal disposal. As highlighted herein, due to the production and degradation of larger plastics, micro and nano plastics are introduced to these ecosystems, causing detrimental impact to plants and animals, including humans, through accumulation in living systems. Though toxicity or health impact are not clearly established, long term accumulation of microplastics in living systems can lead to impact on health of such systems. Critically, this review explores state-of-the art physical, chemical, and biological methods to remove and destroy new and legacy microplastics in aquatic ecosystems (natural and urban). Currently, there are no standardised, accepted, and cost-effective methods for complete removal of microplastics from these aquatic ecosystems. Gaps in knowledge and recommendations for future research to help inform practice and legislation are highlighted. A key consideration highlighted through the review is that microplastics cycle through ecosystems – natural and engineered, these do not operate in siloes and waste from treatment processes could be a conduit for (unintended) recontamination of microplastics. Hence there is a need to take a whole systems approach when developing innovative removal or destructive solutions and, ultimately, reducing plastic use remains the best option to best safeguard future environmental and public health

Application of enhanced assimilable organic carbon method across operational drinking water systems

Assimilable organic carbon (AOC) is known to correlate with microbial growth, which can consequently degrade drinking water quality. Despite this, there is no standardised AOC test that can be applied to drinking water distribution systems (DWDS). Herein we report the development of a quick, robust AOC that incorporates known strains Pseudomonas fluorescens strain P-17 and Spirillum strain NOX, a higher inoculum volume and enumeration using flow cytometry to generate a quicker (total test time reduced from 14 to 8 days), robust method. We apply the developed AOC test to twenty drinking water treatment works (WTW) to validate the method reproducibility and resolution across a wide range of AOC concentrations. Subsequently, AOC was quantified at 32 sample points, over four DWDS, for a year in order to identify sinks and sources of AOC in operative networks. Application of the developed AOC protocol provided a previously unavailable insight and novel evidence of pipes and service reservoirs exhibiting different AOC and regrowth behaviour. Observed correlations between AOC and microbial growth highlight the importance of monitoring AOC as an integral part of managing drinking water quality at the consumers tap

Linking discolouration modelling and biofilm behaviour within drinking water distribution systems

High quality drinking water exits modern treatment works, yet water quality degradation such as discolouration continues to occur within drinking water distribution systems (DWDS). Discolouration is observed globally, suggesting a common process despite variations in source, treatment, disinfection and network configurations. The primary cause of discolouration has been identified as mobilisation of particulate material from pipe walls and the verified Prediction of Discolouration in Distribution Systems (PODDS) model uses measurable network hydraulics to simulate this response. In this paper the cohesive properties of discolouration material are explored and it is hypothesised that in simulating the turbidity response, the PODDS model is actually describing the development and cohesive strength behaviour of biofilms. Applying this concept can therefore facilitate a rapid and simple assessment of DWDS biofilm activity. A review of the findings from PODDS studies conducted internationally is presented, focussing on the macro or observable aspects of discolouration. These are compared and contrasted with associated biofilm studies which consider discolouration material at the micro-scale. Combining the results from these (past) studies to improve the understanding of interactions between microbial ecology and discolouration are discussed with a view to DWDS operational strategies that safeguard and optimise drinking water supply