4 research outputs found
Combined stent-retriever and aspiration intra-arterial thrombectomy performance for fragmentable blood clots: A proof-of-concept computational study
Mechanical thrombectomy (MT) treatment of acute ischemic stroke (AIS) patients typically involves use of stent retrievers or aspiration catheters alone or in combination. For in silico trials of AIS patients, it is crucial to incorporate the possibility of thrombus fragmentation during the intervention. This study focuses on two aspects of the thrombectomy simulation: i) Thrombus fragmentation on the basis of a failure model calibrated with experimental tests on clot analogs; ii) the combined stent-retriever and aspiration catheter MT procedure is modeled by adding both the proximal balloon guide catheter and the distal access catheter. The adopted failure criterion is based on maximum principal stress threshold value. If elements of the thrombus exceed this criterion during the retrieval simulation, then they are deleted from the calculation. Comparison with in-vitro tests indicates that the simulation correctly reproduces the procedures predicting thrombus fragmentation in the case of red blood cells rich thrombi, whereas non-fragmentation is predicted for fibrin-rich thrombi. Modeling of balloon guide catheter prevents clot fragments' embolization to further distal territories during MT procedure.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Biomechatronics & Human-Machine ControlMedical Instruments & Bio-Inspired Technolog
Development of in silico models to guide the experimental characterisation of penile tissue and inform surgical treatment of erectile dysfunction
This paper presents a computational study to investigate the mechanical properties of human penile tissues. Different experimental testing regimes, namely indentation and plate-compression tests, are compared to establish the most suitable testing regime for establishing the mechanical properties of the different penile tissues. An idealised MRI-based geometry of the penis, containing different tissue layers, is simulated using the finite element (FE) method to enable realistic predictions of the deformation of the penis. Unlike the linear elastic models used in the literature to-date, hyperelastic isotropic/anisotropic material models are used to capture material nonlinearity and anisotropy. The influence of material properties, morphological variations, material nonlinearity and anisotropy are investigated. Moreover, the implantation of an inflatable penile prosthesis (IPP) is simulated to assess the effects of the implantation procedure, material nonlinearity, and anisotropy on tissue stresses. The results indicate that the interior layers of the penis do not affect the overall stiffness of the penis in the indentation test, while the plate-compression test is able to capture the effects of these layers. Tunica Albuginea (TA) is found to have the most significant contribution to the total stiffness of the penis under load. It can also be observed that buckling occurs in the septum of the penis during the compression tests, and different morphologies dictate different compressive behaviours. There is a clear need for future experimental studies on penile tissues given the lack of relevant test data in the literature. Based on this study, plate-compression testing would offer the most insightful experimental data for such tissue characterisation.Medical Instruments & Bio-Inspired Technolog
The role of tissue biomechanics in the implantation and performance of inflatable penile prostheses: current state of the art and future perspective
INTRODUCTION: Erectile dysfunction (ED) affects to some degree approximately 52% of the male population aged 40-70 years. Many men do not respond to, or are precluded from using, pharmaceutical treatments for ED and are therefore advised to consider penile prostheses. Different types of penile prosthesis are available, such as inflatable penile prostheses (IPPs). IPPs consist of a pair of inflatable cylinders inserted into the corpora cavernosa (CC). During inflation/deflation of these cylinders, the CC and other surrounding tissues such as the tunica albuginea (TA) are highly impacted. Therefore, it is critical to understand the mechanics of penile tissues for successful implantation of IPPs and to reduce tissue damage induced by IPPs. OBJECTIVES: We explored the importance of the biomechanics of penile tissues for successful IPP function and reviewed and summarized the most significant studies on penile biomechanics that have been reported to date. METHODS: We performed an extensive literature review of publications on penile biomechanics and IPP implantation. RESULTS: Indenters have been used to characterize the mechanical behavior of whole penile tissue; however, this technique applied only local deformation, which limited insights into individual tissue components. Although one reported study addressed the mechanical behavior of TA, this investigation did not consider anisotropy, and there is a notable absence of biomechanical studies on CC and CS. This lack of understanding of penile tissue biomechanics has resulted in computational models that use linear-elastic materials, despite soft tissues generally exhibiting hyperelastic behavior. Furthermore, available benchtop/synthetic models do not have tissue properties matched to those of the human penis, limiting the scope of these models for use as preclinical testbeds for IPP testing. CONCLUSION: Improved understanding of penile tissue biomechanics would assist the development of realistic benchtop/synthetic and computational models enabling the long-term performance of IPPs to be better assessed.Medical Instruments & Bio-Inspired Technolog
Tensile and Compressive Mechanical Behaviour of Human Blood Clot Analogues
Endovascular thrombectomy procedures are significantly influenced by the mechanical response of thrombi to the multi-axial loading imposed during retrieval. Compression tests are commonly used to determine compressive ex vivo thrombus and clot analogue stiffness. However, there is a shortage of data in tension. This study compares the tensile and compressive response of clot analogues made from the blood of healthy human donors in a range of compositions. Citrated whole blood was collected from six healthy human donors. Contracted and non-contracted fibrin clots, whole blood clots and clots reconstructed with a range of red blood cell (RBC) volumetric concentrations (5–80%) were prepared under static conditions. Both uniaxial tension and unconfined compression tests were performed using custom-built setups. Approximately linear nominal stress–strain profiles were found under tension, while strong strain-stiffening profiles were observed under compression. Low- and high-strain stiffness values were acquired by applying a linear fit to the initial and final 10% of the nominal stress–strain curves. Tensile stiffness values were approximately 15 times higher than low-strain compressive stiffness and 40 times lower than high-strain compressive stiffness values. Tensile stiffness decreased with an increasing RBC volume in the blood mixture. In contrast, high-strain compressive stiffness values increased from 0 to 10%, followed by a decrease from 20 to 80% RBC volumes. Furthermore, inter-donor differences were observed with up to 50% variation in the stiffness of whole blood clot analogues prepared in the same manner between healthy human donors.Medical Instruments & Bio-Inspired Technolog