157 research outputs found
Oxidation of carbon monoxide over Ag (111) by preadsorbed active oxygen studied by XPS and UPS
N/
Segregation and precipitation of Er in Ge
Although Er-doped Genanomaterials are attractive for photonic applications, very little is known about the basic properties of Er in Ge. Here, the authors study the annealing behavior of Geimplanted with keV Er ions to doses resulting in ≲1at.% of Er. Large redistribution of Er, with segregation at the amorphous/crystalline interface, starts at ≳500°C, while lower temperatures are required for material recrystallization. However, even at 400°C, Er forms precipitates. The concentration of Er trapped in the bulk after recrystallization decreases with increasing temperature but is independent of the initial bulk Er concentration for the range of ion doses studied here.Work at the ANU was supported
by the ARC
Deformation behavior of ion-irradiated polyimide
We study nanoindentationhardness, Young’s modulus, and tensile strength of polyimide (Kapton H) films bombarded with MeV light ions in the predominantly electronic stopping power regime. Results show that, for all the ion irradiation conditions studied, bombardment increases the hardness and Young’s modulus and decreases the tensile strength. These changes depend close to linearly on ion fluence and superlinearly (with a power-law exponent factor of ∼1.5) on electronic energy loss. Physical mechanisms of radiation-induced changes to mechanical properties of polyimide are discussed.This work was performed under the auspices of the U. S.
Department of Energy by the University of California, LLNL
under Contract No. W-7405-ENG-48. The project (03-FS-
027) was funded by the Laboratory Directed Research and
Development Program at LLNL
Effects of carbon on ion-implantation-induced disorder in GaN
Wurtzite GaN films bombarded with 40keV C ions to high doses (5×10¹⁷ and 1×10¹⁸cm⁻²) are studied by a combination of Rutherford backscattering/channeling spectrometry, transmission electron microscopy, and soft x-ray absorption spectroscopy. Results show that, contrary to other ion species, implanted C forms nitrilelike carbon-nitride bonds (—C≡N) and suppresses ion-beam-induced material decomposition involving the formation and agglomeration of ≳5-nm-large N₂ gas bubbles.Work at the ANU was supported by the ARC. The ALS is supported
by the Director, Office of Science, Office of BES,
Materials Sciences Division, of the U.S. DOE under Contract
No. DE-AC03-76SF00098 at LBNL
Recommended from our members
Comparative experimental study of x-ray absorption spectroscopy and electron energy loss spectroscopy on passivated U surfaces
X-ray absorption spectroscopy and electron energy loss spectroscopy are complementary analytical techniques on energy and spatial resolution. These techniques are based on the same fundamental physical process of core excitation with either an incident photon or incident electron. In the proper experimental configuration the electron and photon inelastic scattering amplitudes are comparable and thus the x-ray and electron absorption edges look identical. We have applied these two complementary analytical techniques to investigate the electronic structure of C ion implanted U. Implantation of C{sup +} ions into U{sup 238} has been shown to produce a physically and chemically modified surface layer that passivates the surface preventing further air oxidation and corrosion. Comparison of the resultant spectra reveal that transitions between the initial state and a series of final states yield numerous strong features at the absorption edge that can provide structural information and information on the local chemical environment, including the character of the U 5f state
Summary Abstract: Adsorption of cyclohexane on Ru(001): A high resolution electron energy loss and UV-photoemission study
In the present work, we have investigated the adsorption of cyclohexane on Ru(001), using EELS (both in the specular and off-specular directions), angle-resolved photoelectron spectroscopy, and TDMS (combined in one UHV system) to investigate the orientation and symmetry of the adsorbed molecule and compare the results with the above-mentioned structural model [3]
Oxidation of uranium nanoparticles produced via pulsed laser ablation
An experimental apparatus designed for the synthesis, via pulsed laser deposition, and analysis of metallic nanoparticles and thin films of plutonium and other actinides was tested on depleted uranium samples. Five nanosecond pulses from a Nd:YAG laser produced films of {approx}1600 {angstrom} thickness that were deposited showing an angular distribution typical thermal ablation. The films remained contiguous for many months in vacuum but blistered due to induced tensile stresses several days after exposure to air. The films were allowed to oxidize from the residual water vapor within the chamber (2 x 10{sup -10} Torr base pressure). The oxidation was monitored by in-situ analysis techniques including x-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and scanning tunneling microscopy (STM) and followed Langmuir kinetics
Summary Abstract: Adsorption of cyclohexane on Ru(001): A high resolution electron energy loss and UV‐photoemission study
The lowa farmer and world war II
World War II is the biggest fact in the Iowa farm situation. Though Iowa is far removed from air bombing and submarine torpedoing, it is on the battle front so far as economic and social effects of the war are concerned. Iowa’s commercial agriculture underwent terrific strain during and following World War I, and the pressures arising out of World War II promise to be similar, although less severe.
It is the purpose of this report to estimate what some of these pressures will be. An understanding of the social and economic forces at work is necessary before plans can be made and action taken to ease the shock of war. The experience of the earlier war helps us to understand these forces, but that experience must be interpreted in light of the changed situation today
Hydrogen adsorption on Pd(133) surface
In this study used is an approach based on measurements of the total energy
distribution (TED) of field emitted electrons in order to examine the
properties of Pd (133) from the aspect of both hydrogen adsorption and surface
hydrides formation. The most favourable sites offered to a hydrogen atom to be
adsorbed have been indicated and an attempt to describe the peaks of the
enhancement factor R spectrum to the specific adsorption sites has also been
made.Comment: to be submitted to the Centr. Eur. J. Phy
- …