A route to anionic hydrophilic films of copolymers of l-leucine, l-aspartic acid and l-aspartic acid esters

A series of copolymers of l-leucine and β-benzyl-l-aspartate [Leu/Asp(OBz)] covering the range 30–70 mol % of l-leucine, was synthesized by the N-carboxyanhydride (NCA) method. The copolymers were characterized by elemental analysis, infra-red spectroscopy and viscometry. For all compositions high molecular weight copolymers were prepared with excellent film-forming properties. Tercopolymers of l-leucine, β-benzyl-l-aspartate and β-methyl-l-aspartate [Leu/Asp(OBz)/Asp(OMe)] were obtained after an ester interchange reaction (conversion 85–95%) with the original copolymer systems. These tercopolymers were characterized by elemental analysis and i.r. spectroscopy. Films of the tercopolymers, cast from organic solvents, could be converted into hydrophilic films by saponification of the methyl ester groups using alkaline water/organic solvent media. The hydrophilic films, which will be further investigated for their use as haemodialysis membranes were characterized by potentiometric titration and i.r. spectroscopy

Effect of fibronectin on the binding of antithrombin III to immobilized heparin

An objective of this research is to verify the mechanism of anticoagulant activity of surface-immobilized heparin in the presence of plasma proteins. The competition and binding interaction between immobilized heparin and antithrombin III (ATIII)/thrombin have been described in vitro. However, the strong ionic character of heparin leads to its specific and nonspecific binding with many other plasma proteins. Most notably, fibronectin contains six active binding sites for heparin which may interfere with the subsequent binding of heparin with ATIII or thrombin. \ud Heparin was covalently immobilized through polyethylene oxide (PEO) hydrophilic spacer groups onto a model surface synthesized by random copolymerization of styrene and p-aminostyrene. The binding interaction of immobilized heparin with ATIII was then determined in the presence of different fibronectin concentrations. The binding interaction was studied by first binding immobilized heparin with ATIII, followed by the introduction of fibronectin; heparin binding with fibronectin, followed by incubation with ATIII, and simultaneous incubation of surface immobilized heparin with ATIII and fibronectin. The extent of ATIII binding to heparin in each experiment was assayed using a chromogenic substrate for ATIII, S-2238. \ud The results of this study demonstrate that the displacement of ATIII from immobilized heparin was proportional to the fibronectin concentration, and was reversible. Furthermore, the binding sequence did not play a role in the final concentration of ATIII bound to immobilized heparin

Biodegradability and tissue reaction of random copolymers of L-leucine, L-aspartic acid, and L-aspartic acid esters

A series of copoly(α-amino acids) with varying percentages of hydrophilic (l-aspartic acid) and hydrophobic monomers (l-leucine, ß-methyl-l-aspartate, and ß-benzyl-l-aspartate) were implanted subcutaneously in rats and the macroscopic degradation behavior was studied. Three groups of materials (A, B, C) with different ranges of hydrophilicity were distinguished: A) hydrophobic materials showed no degradation after 12 weeks; B) more hydrophilic materials revealed a gradual reduction in size of the samples, but were still present after 12 weeks; and C) hydrophilic copolymers disappeared within 24 hr. \ud The tissue reactions caused by the materials of group A resembled that of silicone rubber, whereas those of group B showed a more cellular reaction

Adhesion of endothelial cells and adsorption of serum proteins on gas plasma-treated polytetrafluoroethylene

From in vitro experiments it is known that human endothelial cells show poor adhesion to hydrophobic polymers. The hydrophobicity of vascular prostheses manufactured from Teflon® or Dacron® may be the reason why endothelialization of these grafts does not occur after implantation in humans. We modified films of polytetrafluoroethylene (Teflon®) by nitrogen plasma and oxygen plasma treatments to make the surfaces more hydrophilic. Depending on the plasma exposure time, modified polytetrafluoroethylene surfaces showed water-contact angles of 15–58°, versus 96° for unmodified polytetrafluoroethylene. ESCA measurements revealed incorporation of both nitrogen- and oxygen-containing groups into the polytetrafluoroethylene surfaces, dependent on the plasma composition and exposure time. The thickness of the modified surface layer was ~1 nm. The adhesion of cultured human endothelial cells from 20% human serum-containing culture medium to modified polytetrafluoroethylene surfaces with contact angles of 20–45° led to the formation of a monolayer of cells, which was similar to the one formed on tissue culture polystyrene, the reference surface. This was not the case when endothelial cells were seeded upon unmodified polytetrafluoroethylene. Surface-modified expanded polytetrafluoroethylene prosthesis material (GORE TEX® soft tissue) also showed adhesion of endothelial cells comparable to cell adhesion to the reference surface. The amounts of serum proteins, including fibronectin, adsorbed from serumcontaining medium to modified polytetrafluoroethylene surfaces were larger than those adsorbed to unmodified polytetrafluoroethylene. Moreover, the modified surfaces probably allow the exchange of adsorbed serum proteins with cellular fibronectin

Block copolymers of poly(L-lactide) and poly(ε-caprolactone) or poly(ethylene glycol) prepared by reactive extrusion

Blends of poly(L-lactide) (PLLA) and poly(-caprolactone) (PCL) were prepared in a co-rotating twin screw miniextruder (40 rpm, 200°). It was attempted to prepare multiblock copolymers by allowing a controlled number of transesterification reactions. Various cat-alysts (n-Bu3SnOMe, Sn(Oct)2, Ti(OBu)4, Y(Oct)3, para-toluene sulphonic acid) were introduced to promote these transesterification reactions. However, PLLA degradation by ring-closing depolymerization was the dominant reaction in every case. Alternatively, after showing that L-lactide can be conveniently polymerized in the extruder, L-lactide and hy-droxyl functionalized prepolymers of PCL or poly(ethylene glycol) (PEG) were fed to the extruder in the presence of stannous octoate. Monomer conversions of over 90% and effective transformation of all hydroxyl end groups present were generally reached. Di-and triblock copolymers could be prepared in this way with characteristics very similar to polymers prepared in a batch-type process, but with considerably reduced reaction times in a fashion, which is, in principle, scaleable to a continuous process for the production of such block copolymers

High-performance liquid chromatography as a technique to measure the competitive adsorption of plasma proteins onto latices

Isotherms of human serum albumin (HSA), human immunoglobulin G (HIgG), and human fibrinogen (HFb) onto a polystyrene (PS)-latex were determined by depletion of protein in the solution, which was either followed by radioactivity measurements or by UV spectroscopy. Different adsorption isotherms for the same protein were obtained when either radioactivity measurements or UV spectroscopy was used as a detection technique. In order to obtain reliable results from competitive protein adsorption experiments, a method based on the use of high-performance liquid chromatography was developed. A strong preferential adsorption of HFb was observed when adsorption studies were carried out with mixtures of HSA, HFb, and HIgG. When adsorption studies were carried out with solutions containing HSA monomer and dimer, a strong preferential adsorption of HSA dimer was also observed

Deposition of endothelial fibronectin on polymeric surfaces

Cellular fibronectin is deposited on tissue culture polystyrene during the adhesion and spreading of cultured human endothelial cells (HEC). Following the seeding of HEC upon this polymer, larger amounts of fibronectin are deposited as both cell density and incubation time increase. Our results indicate that the ability to deposit cellular fibronectin onto a polymeric surface is a condition for the spreading and proliferation of HEC

Interaction of cultured human endothelial cells with polymeric surfaces of different wettabilities

The in vitro interaction of human endothelial cells (HEC) and polymers with different wettabilities in culture medium containing serum was investigated. Optimal adhesion of HEC generally occurred onto moderately wettable polymers. Within a series of cellulose type of polymers the cell adhesion increased with increasing contact angle of the polymer surfaces. Proliferation of HEC occurred when adhesion was followed by progressive flattening of the cells.\ud \ud Our results suggest that moderately wettable polymers exhibit a serum and/or cellular protein adsorption pattern that is favourable for growth of HEC

Dependence of endothelial cell growth on substrate-bound fibronectin

A better understanding of the mechanism of adhesion, spreading and proliferation of human endothelial cells (HEC) on polymeric surfaces may lead to the development of vascular prostheses which allow the formation of an endothelial lining on the luminal surface. In the present investigation the interaction of HEC with polyethylene precoated with monoclonal antibodies directed against HEC membrane antigens and against extracellular matrix compounds was studied. F(ab¿)2 fragments of a monoclonal antibody, directed against an endothelial cell membrane antigen, and F(ab')2 fragments of a monoclonal antibody, directed against cellular fibronectin, were also included in this study. Preadsorption of these antibodies and F(ab')2 fragments, including mixtures of antibodies and mixtures of F(ab')2 fragments, resulted in cell adhesion and spreading as well as moderate cell proliferation (or no proliferation) for several days. However, a good proliferation of HEC was only observed on polyethylene precoated with fibronectin or CLB-HEC-FN-140 (directed against fibronectin). These results strongly suggest that fibronectin, bound to a solid substrate, provides a biochemical signal necessary for the proliferation of HEC. The initial proliferation of HEC on other preadsorbed antibodies or F(ab')2 fragments may be explained by the fact that suspended HEC, used for cell seeding, still possess cell membrane-bound fibronectin

The role of cellular fibronectin in the interaction of human endothelial cells with polymers

During in-vitro adhesion, spreading and proliferation of human endothelial cells (HEC) on tissue culture polystyrene (TCPS), cellular fibronectin is deposited onto the surface of TCPS in spite of the fact that relatively large amounts of proteins have been adsorbed from the serum-containing culture medium to this surface. Evidence is presented that serum proteins, adsorbed to the TCPS surface, are displaced by cellular fibronectin. In addition, the interaction of HEC with polyethylene, precoated with monoclonal antibodies directed against HEC membrane antigens and against extracellular matrix compounds, was studied. F(ab')2 fragments of two monoclonal antibodies were also included in this study. Preadsorption of these antibodies and F(ab')2 fragments resulted in cell adhesion and spreading as well as moderate cell proliferation (or no proliferation) for several days. A good cell proliferation of HEC was only observed on polyethylene precoated with fibronectin or an antibody directed against fibronectin. The results indicate that the direct or indirect deposition of fibronectin is a prerequisite for the proliferation of HEC. It is suggested that fibronectin, bound to a solid substrate, provides a biochemical signal necessary for the proliferation of HEC