11 research outputs found

    Analytical methods for biomolecules involved in atmospheric aerosol formation in the Arctic

    Full text link
    In the Arctic, increasing ice-free conditions and nutrients freed from the melting ice must strongly influence the marine life. Aerosol emissions from microbiological marine processes may affect the low clouds and fogs over the summer Arctic, which in turn have effects on the melting of sea ice. The radiative properties of the high Arctic low clouds are strongly dependent on the number concentration of airborne water-soluble particles, known as cloud condensation nuclei (CCN). If the effects of CCN on cloud optical properties is to be fully understood it is important to be able to specify the source and concentrations of the Arctic aerosol particles. Previous studies in the Arctic have indicated that organic material formed in the uppermost ocean surface is transferred to the atmosphere and plays a potentially very important role in the aerosol-fog/cloud cycle. However, many aspects of this process remain unverified and chemical characterisation of targeted groups of biomolecules is still notably fragmentary or non-existing. Investigation of biomolecules, particularly amino acids, peptides and proteins together with mono- and polysac­charides and fatty acids in the airborne aerosol, and their relative contributions to fog/cloud water, requires development of an array of “cutting edge” analytical techniques and methods. In this thesis, electrospray ionization mass spectrometry was used for all applications and target biomolecules. The measurements in the Arctic turned out to be challenging due to the highly complex, salty matrices, combined with very low concentration and high diversity of the target biomolecules, and each step of the analytical chain needed careful consideration. To increase the detectability of the very low levels of polysaccharides and proteins in aerosols, these compounds were hydrolyzed to their subunits, monosaccharides and amino acids. Monosaccharides were separated using hydrophilic interaction chromatography, which was beneficial for their detection in electrospray ionization mass spectrometry. Amino acids were derivatized, yielding improvement in reversed-phase chromatographic separation, ionization efficiency as well as selectivity. For fatty acids in a sea surface sample, a novel fast screening method was developed, utilizing travelling-wave ion mobility separation as an orthogonal technique connected to mass spectrometry. In addition, a method for the detection of wood burning as an anthropogenic source of aerosols was developed, utilizing anhydrous monosaccharides as markers. This method can be used in the upcoming expeditions for source apportionment studies. The results from the analyses of the aerosol and fog water samples, collected over the summer pack ice north of 80 °N, show that both total polysaccharides and total proteinaceous compounds (sum of proteins, peptides and amino acids) occurred at the pmol m-3 to nmol m-3 level. Interestingly, the levels were found higher between different years, suggested to be coupled to less ice coverage and thus to a higher biological activity in the ocean surface. The highest concentrations of polysaccharides, as an indication of marine polymer gels, were found during the summer over the pack ice area. In addition, a pilot source apportionment study was carried out combining the measurement of different molecular tracers, used as source markers. This study indicates the seasonality and abundance of marine polymer gels as an important feature of the Arctic Ocean connected to the melting and freezing of sea ice. It should be further studied how the abundance of these gels, which have a high potential for cloud droplet activation, affect the melting and freezing of the perennial sea ice. Given the successful development of analytical methods for targeted groups of biomolecules, this thesis has supported the importance of biomolecules as CCN and for cloud formation in the Arctic. Less ice coverage may further increase the number of biomolecular CCN which could change the radiative balance, by the formation of more low-level clouds. Overall, more studies are required to further unravel the complex relationship of biogenic sources, atmospheric chemistry and meteorology to assess the impact of climate change on the Arctic.At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Manuscript. Paper 3: Manuscript. Paper 5: Manuscript.</p

    Contribution of wood burning to exposures of PAHs and oxy-PAHs in Eastern Sweden

    Full text link
    A growing trend in developed countries is the use of wood as fuel for domestic heating due to measures taken to reduce the usage of fossil fuels. However, this imposed another issue with the environment and human health. That is, the emission from wood burning contributed to the increased level of atmospheric particulates and the wood smoke caused various respiratory diseases. The aim of this study was to investigate the impact of wood burning on the polycyclic aromatic hydrocarbons (PAHs) in air PM10 using known wood burning tracers, i.e. levoglucosan, mannosan and galactosan from the measurement at the urban background and residential areas in Sweden. A yearly measurement from three residential areas in Sweden showed a clear seasonal variation of PAHs during the cold season mainly from increased domestic heating and meteorology. Together, an increased sugar level assured the wood burning during the same period. The sugar ratio (levoglucosan/(mannosan+galactosan)) was a good marker for wood burning source such as the wood type used for domestic heating and garden waste burning. On the Walpurgis Night, the urban background measurement demonstrated a dramatic increase in levoglucosan, benzo[a]pyrene (B[a]P) and oxygenated PAHs (OPAHs) concentrations from the increased wood burning. A significant correlation between levoglucosan and OPAHs was observed suggesting OPAHs to be an indicator of wood burning together with levoglucosan. The levoglucosan tracer method and modelling used in predicting the B[a]P concentration could not fully explain the measured levels in the cold season. The model showed that the local wood source contributed to 98 % of B[a]P emissions in the Stockholm area and 2 % from the local traffic. However, non-local sources were dominating in the urban background (60%). A further risk assessment estimated that the airborne particulate PAHs caused 13.4 cancer cases per 0.1 million inhabitants in Stockholm County

    Measurements of Atmospheric Proteinaceous Aerosol in the Arctic Using a Selective UHPLC/ESI-MS/MS Strategy

    Full text link
    In this article, an analytical methodology to investigate the proteinaceous content in atmospheric size-resolved aerosols collected at the Zeppelin observatory (79 °N, 12 °E) at Ny Ålesund, Svalbard, from September to December 2015, is proposed. Quantitative determination was performed after acidic hydrolysis using ultrahigh-performance liquid chromatography in reversed-phase mode coupled to electrospray ionization tandem mass spectrometry. Chromatographic separation, as well as specificity in the identification, was achieved by derivatization of the amino acids with N-butyl nicotinic acid N-hydroxysuccinimide ester prior to the analysis. The chromatographic run was performed within 11 min and instrumental levels of detection (LODs) were between 0.2 and 8.1 pg injected on the column, except for arginine which exhibited an LOD of 37 pg. Corresponding method LODs were between 0.01 and 1.9 fmol/m3, based on the average air sampling volume of 57 m3. The sum of free amino acids and hydrolyzed polyamino acids was shown to vary within 6-2914 and 0.02-1417 pmol/m3 for particles in sizes < 2 and 2-10 μm in equivalent aerodynamic diameter, respectively. Leucine, alanine, and valine were the most abundant among the amino acids in both aerosol size fractions. In an attempt to elucidate source areas of the collected aerosols, 5- to 10-day 3D backward trajectories reaching the sampling station were calculated. Overall, the method described here provides a first time estimate of the proteinaceous content, that is, the sum of free and polyamino acids, in size-resolved aerosols collected in the Arctic. Graphical Abstract ᅟ.status: Published onlin

    A fast ultra performance supercritical fluid chromatography-tandem mass spectrometric method for profiling of targeted phytosterols

    Full text link
    Phytosterols are essential structural components of plant cell membranes and possess health-related benefits, including lowering blood cholesterol levels in humans. Numerous analytical methods are being used to profile plant and animal sterols. Chromatography hyphenated to tandem mass spectrometry, is a better option due to its specificity, selectivity, and sensitivity. An ultra-performance supercritical fluid chromatography hyphenated with atmospheric pressure chemical ionization (APCI) tandem mass spectrometric method was developed and eval-uated for fingerprint analysis of seven phytosterols. Mass spectrometry fragmentation behavior was used for phytosterol identification, and multiple reaction monitoring scanning was utilized for phytosterol confirmation, where APCI outperformed superiority in terms of ion intensity, particularly in the production of [M + H-H2O]+ ions rather than [M + H]+ ions. The chromatographic conditions were thoroughly evaluated, and the ionization parameters were optimized as well. In a 3 min. run, the seven phytosterols were separated concurrently. The calibration and repeatability tests were conducted to check the instrument's performance, and the results indicated that all of the phytosterols tested had correlation coefficients (r2) greater than 0.9911 over the con-centration range of 5-5000 ng/mL. The limit of quantification was below 20 ng/mL for all the tested analytes except for stigmasterol and campesterol. The partially validated method was applied for the evaluation of phytosterols in pure coconut oil and palm oil in order to demonstrate its applicability. Total sterols in coconut and palm oils were 126.77 ng/mL and 101.73 ng/mL, respectively. In comparison to earlier methods of phytosterol analysis, the novel method offers a far faster, more sensitive, and more selective analytical process

    Simultaneous determination of 22 fatty acids in total parenteral nutrition (TPN) components by gas chromatography-mass spectrometry (GC-MS)

    Full text link
    Evaluating total parenteral nutrition (TPN) products for quality assurance and quality control is crucial due to the chemical complexity of its components. With the advent of exploring different approaches for analysing TPN components using tandem mass spectrometry techniques, there is still a need for a robust and reproducible method for industrial routine analyses. This study allows simple, simultaneous determination of 22 fatty acids (FAs) commonly found in TPN components using gas chromatography-mass spectrometry (GC-MS). Five different transesterification techniques were applied for the FA standards and the sodium methoxide in methanol-dimethyl carbonate method was selected due to its good methylation efficiency. Fatty acid methyl esters (FAMEs) were separated in gas chromatography using an HP-5MS UI column with helium as the carrier gas. Mass spectrometry was used to fragment and quantify FAMEs using electron ionization (EI) and selected ion monitoring (SIM) mode. The analytical method was evaluated using the guidelines from the US Food and Drug Agency (FDA) and European Medicines Agency (EMA) in compliance with the International Council for Harmonization (ICH) document Q2(R2). Correlation coefficients (R-2) of the calibration curves for FAMEs were 0.99, except for C24:1 n-9 and C24:0, both R-2 = 0.98. The limits of detection (LOD) and quantification (LOQ) were found to be 1.69 mu g mL(-1) and 5.14 mu g mL(-1), respectively. The linear range was from 3.10-179.9 mu g mL(-1) for most FAMEs, except for C18:1 n-7 (3.96-224.9 mu g mL(-1)) and C18:1 n-9 (6.30-349.57 mu g mL(-1)). The intra-day and inter-day precision coefficients of variance (CV) of the method were less than 11.10% and 11.30%, respectively. Freeze-thaw cycles and ambient temperature measurements were performed for assessing sample stability. The validated method was applied to analyse major TPN components-fish and olive oils, and an unidentified lipid sample. The presented GC-MS method is simple and robust in the identification and quantification of 22 fatty acids simultaneously in the tested TPN components

    Engineered Aldolases Catalyzing Stereoselective Aldol Reactions Between Aryl-Substituted Ketones and Aldehydes

    Full text link
    An A129G/R134V/S166G triple mutant of fructose 6-phosphate aldolase (FSA) from Escherichia coli was further engineered with the goal to generate new enzyme variants capable of catalyzing aldol reactions between aryl substituted ketones and aldehydes. Residues L107 and L163 were subjected to saturation mutagenesis and the resulting library of FSA variants was screened for catalytic activity with 2-hydroxyacetophenone and phenylacetaldehyde as substrates. A selection of aldolase variants was identified that catalyze the synthesis of 2,3-dihydroxy-1,4-diphenylbutanone. The most active enzyme variants contained an L163C substitution. An L107C/L163C variant was further tested for activity with substituted phenylacetaldehydes, and was shown to afford the production of the corresponding diphenyl substituted butanones with good diastereoselectivities (anti : syn dr of 10 to 30) and reasonable to good enantioselectivities of syn enantiomers (er of 5 to 25)

    Nanocellulose–Zeolite Composite Films for Odor Elimination

    Full text link
    Free standing and strong odor-removing composite films of cellulose nanofibrils (CNF) with a high content of nanoporous zeolite adsorbents have been colloidally processed. Thermogravimetric desorption analysis (TGA) and infrared spectroscopy combined with computational simulations showed that commercially available silicalite-1 and ZSM-5 have a high affinity and uptake of volatile odors like ethanethiol and propanethiol, also in the presence of water. The simulations showed that propanethiol has a higher affinity, up to 16%, to the two zeolites compared with ethanethiol. Highly flexible and strong free-standing zeolite–CNF films with an adsorbent loading of 89 w/w% have been produced by Ca-induced gelation and vacuum filtration. The CNF-network controls the strength of the composite films and 100 μm thick zeolite–CNF films with a CNF content of less than 10 vol % displayed a tensile strength approaching 10 MPa. Headspace solid phase microextraction (SPME) coupled to gas chromatography–mass spectroscopy (GC/MS) analysis showed that the CNF–zeolite films can eliminate the volatile thiol-based odors to concentrations below the detection ability of the human olfactory system. Odor removing zeolite–cellulose nanofibril films could enable improved transport and storage of fruits and vegetables rich in odors, for example, onion and the tasty but foul-smelling South-East Asian Durian fruit

    Amyloid-β Peptide Interactions with Amphiphilic Surfactants: Electrostatic and Hydrophobic Effects

    Full text link
    The amphiphilic nature of the amyloid-β (Aβ) peptide associated with Alzheimer's disease facilitates various interactions with biomolecules such as lipids and proteins, with effects on both structure and toxicity of the peptide. Here, we investigate these peptide-amphiphile interactions by experimental and computational studies of Aβ(1-40) in the presence of surfactants with varying physicochemical properties. Our findings indicate that electrostatic peptide-surfactant interactions are required for coclustering and structure induction in the peptide and that the strength of the interaction depends on the surfactant net charge. Both aggregation-prone peptide-rich coclusters and stable surfactant-rich coclusters can form. Only Aβ(1-40) monomers, but not oligomers, are inserted into surfactant micelles in this surfactant-rich state. Surfactant headgroup charge is suggested to be important as electrostatic peptide-surfactant interactions on the micellar surface seems to be an initiating step toward insertion. Thus, no peptide insertion or change in peptide secondary structure is observed using a nonionic surfactant. The hydrophobic peptide-surfactant interactions instead stabilize the Aβ monomer, possibly by preventing self-interaction between the peptide core and C-terminus, thereby effectively inhibiting the peptide aggregation process. These findings give increased understanding regarding the molecular driving forces for Aβ aggregation and the peptide interaction with amphiphilic biomolecules
    corecore