Nonlinear

Let A be a unital *-algebra with the unit I and a nontrivial projection P∈A. Suppose that A satisfies XAP=0 implies X=0 and XA(I-P)=0 implies X=0. In this paper, we prove that ϕ is a nonlinear A*B+B*A type derivation on A if and only if ϕ is an additive *-derivation. This is then applied to prime *-algebra, von Neumann algebras with no central summands of type I1, factor von Neumann algebras and standard operator algebras

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Polylactic acid (PLA)-thermoplastic polyurethane (TPU) copolymer (PTC) was prepared by melting TPU pellets in molten lactide, followed by in situ ring-opening coordination polymerization. The results from FTIR and 1H-NMR confirmed the formation of the copolymer. PLA/TPU blends with different TPU contents were prepared by melt blending method. SEM and mechanical properties showed a conspicuous phase separation between PLA and TPU. In order to further improve the mechanical properties of the blend, PTC was used as the compatibilizer and the effects of the PTC content on the properties of the blend were investigated. The addition of PTC made TPU particles smaller in PLA matrix and improved the compatibility. With the loading of 5 wt.% PTC, the impact strength of the PLA/TPU blend reached 27.8 kJ/m2, which was 31.1% and 68.5% higher than that of the blend without PTC and pure PLA, respectively. As the content of PTC was more than 5 wt.%, the mechanical properties declined since the compatibilizer tended to form separate clusters, which could reduce the part distributed between the dispersed phase and the matrix, leading to a reduction in the compatibility of the blend. Moreover, the DMA results confirmed PTC could improve the compatibility between PLA and TPU

Comparative transcript profiling reveals the mechanism of female sterility associated with seedless Ponkan Mandarin (Citrus reticulata Blanco)

Seedlessness is a highly desirable trait in citrus varieties. Sterility is the key determination for seedlessness formation. However, the molecular basis for female sterility in seedless mandarin remains unclear. Thus, a seedless Ponkan (Citrus reticulata Blanco cv. Lipeng No. 2) considered the bud mutation of normal seedy Ponkan, was collected to identify candidate genes involved in seedless variation. Suppression subtractive hybridization (SSH) screened 1091 uniESTs related to seedy/seedless Ponkan (727 singlets and 364 contigs), which mainly governed catalytic activity, transferase activity, and oxygen binding. By using RNA-Seq technology, 106 differentially expressed genes (DEGs) were captured, of which 74 were up-regulated and 32 were down-regulated. Gene Ontology and pathway analysis showed that six DEGs were enriched in the biosynthesis of secondary metabolite, whereas five DEGs were enriched in the signaling of plant hormones. The combined results of SSH and RNA-Seq indicated the importance of amino acid metabolism in seedless Ponkan. Our findings revealed that the mechanism of seedless Ponkan generation may be related to gene regulation, signal cascade, and hormone levels. This study provided a solid foundation for functional gene identification in seedless Ponkan and a good reference for relevant research on molecular mechanisms of female sterility in Ponkan mandarin.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

Concentration Gradient Constructions Using Inertial Microfluidics for Studying Tumor Cell–Drug Interactions

With the continuous development of cancer therapy, conventional animal models have exposed a series of shortcomings such as ethical issues, being time consuming and having an expensive cost. As an alternative method, microfluidic devices have shown advantages in drug screening, which can effectively shorten experimental time, reduce costs, improve efficiency, and achieve a large-scale, high-throughput and accurate analysis. However, most of these microfluidic technologies are established for narrow-range drug-concentration screening based on sensitive but limited flow rates. More simple, easy-to operate and wide-ranging concentration-gradient constructions for studying tumor cell–drug interactions in real-time have remained largely out of reach. Here, we proposed a simple and compact device that can quickly construct efficient and reliable drug-concentration gradients with a wide range of flow rates. The dynamic study of concentration-gradient formation based on successive spiral mixer regulations was investigated systematically and quantitatively. Accurate, stable, and controllable dual drug-concentration gradients were produced to evaluate simultaneously the efficacy of the anticancer drug against two tumor cell lines (human breast adenocarcinoma cells and human cervical carcinoma cells). Results showed that paclitaxel had dose-dependent effects on the two tumor cell lines under the same conditions, respectively. We expect this device to contribute to the development of microfluidic chips as a portable and economical product in terms of the potential of concentration gradient-related biochemical research

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Polylactic acid (PLA)-thermoplastic polyurethane (TPU) copolymer (PTC) was prepared by melting TPU pellets in molten lactide, followed by in situ ring-opening coordination polymerization. The results from FTIR and 1H-NMR confirmed the formation of the copolymer. PLA/TPU blends with different TPU contents were prepared by melt blending method. SEM and mechanical properties showed a conspicuous phase separation between PLA and TPU. In order to further improve the mechanical properties of the blend, PTC was used as the compatibilizer and the effects of the PTC content on the properties of the blend were investigated. The addition of PTC made TPU particles smaller in PLA matrix and improved the compatibility. With the loading of 5 wt.% PTC, the impact strength of the PLA/TPU blend reached 27.8 kJ/m2, which was 31.1% and 68.5% higher than that of the blend without PTC and pure PLA, respectively. As the content of PTC was more than 5 wt.%, the mechanical properties declined since the compatibilizer tended to form separate clusters, which could reduce the part distributed between the dispersed phase and the matrix, leading to a reduction in the compatibility of the blend. Moreover, the DMA results confirmed PTC could improve the compatibility between PLA and TPU

Numerical Study of Multivortex Regulation in Curved Microchannels with Ultra-Low-Aspect-Ratio

The field of inertial microfluidics has been significantly advanced in terms of application to fluid manipulation for biological analysis, materials synthesis, and chemical process control. Because of their superior benefits such as high-throughput, simplicity, and accurate manipulation, inertial microfluidics designs incorporating channel geometries generating Dean vortexes and helical vortexes have been studied extensively. However, existing technologies have not been studied by designing low-aspect-ratio microchannels to produce multi-vortexes. In this study, an inertial microfluidic device was developed, allowing the generation and regulation of the Dean vortex and helical vortex through the introduction of micro-obstacles in a semicircular microchannel with ultra-low aspect ratio. Multi-vortex formations in the vertical and horizontal planes of four dimension-confined curved channels were analyzed at different flow rates. Moreover, the regulation mechanisms of the multi-vortex were studied systematically by altering the micro-obstacle length and channel height. Through numerical simulation, the regulation of dimensional confinement in the microchannel is verified to induce the Dean vortex and helical vortex with different magnitudes and distributions. The results provide insights into the geometry-induced secondary flow mechanism, which can inspire simple and easily built planar 2D microchannel systems with low-aspect-ratio design with application in fluid manipulations for chemical engineering and bioengineering

Value-Added Products from Catalytic Pyrolysis of Lignocellulosic Biomass and Waste Plastics over Biochar-Based Catalyst: A State-of-the-Art Review

As the only renewable carbon resource on Earth, lignocellulosic biomass is abundant in reserves and has the advantages of environmental friendliness, low price, and easy availability. The pyrolysis of lignocellulosic biomass can generate solid biochar with a large specific surface area, well-developed pores, and plentiful surface functional groups. Therefore, it can be considered as a catalyst for upgrading the other two products, syngas and liquid bio-oil, from lignocellulosic biomass pyrolysis, which has the potential to be an alternative to some non-renewable and expensive conventional catalysts. In addition, as another carbon resource, waste plastics can also use biochar-based catalysts for catalytic pyrolysis to solve the problem of accumulation and produce fuels simultaneously. This review systematically introduces the formation mechanism of biochar from lignocellulosic biomass pyrolysis. Subsequently, the activation and modification methods of biochar catalysts, including physical activation, chemical activation, metal modification, and nonmetallic modification, are summarized. Finally, the application of biochar-based catalysts for lignocellulosic biomass and waste plastics pyrolysis is discussed in detail and the catalytic mechanism of biochar-based catalysts is also investigated