Extraction of Cellulose Polymeric Material from Populus tremula Fibers: Characterization and Application to the Adsorption of Methylene Blue and Crystal Violet

Cellulose is the most widely available biopolymer which is extensively used for several applications including textiles, composites, pharmaceutical, water treatment, etc. In this investigation, cellulose was chemically extracted from Populus tremula seed fibers. Samples were characterized using FT-IR, SEM, XRD, and TGA-DTA analyses. FT-IR spectrum of the extracted cellulose confirmed that hemicellulose and lignin were removed during alkali and bleaching treatments. SEM images showed the partially roughened surface of the fiber due to the removal of non-cellulosic elements and surface impurities during chemical modification. The crystallinity index values for untreated Populus tremula fibers and extracted cellulose were calculated to be 32.8% and 58.9%, respectively. The obvious increase in the crystallinity index for the extracted cellulose confirmed the removal of amorphous compounds present in raw populus. Alkali-treated populus fibers were more thermally stable than raw fibers. All changes observed after alkali and bleaching treatments evidenced the removal of amorphous contents and non-cellulosic components in raw populus fibers. Extracted cellulose exhibited excellent adsorption capacities of methylene blue (140.4 mg g−1) and crystal violet (154 mg g−1). The pseudo second order equation fitted well the kinetic data indicating a chemi-sorption process. The Freundlich model complied well with the experimental data suggesting that the adsorption of the studied dyes was multilayer

Development, Characterization and Valuable Use of Novel Dosimeter Film Based on PVA Polymer Doped Nitro Blue Tetrazolium Dye and AgNO3 for the Accurate Detection of Low X-ray Doses

Currently, the uncontrolled exposure of individuals to X-rays during medical examinations represents a substantial danger that threatens both medical professionals and patients. Therefore, radiation dosimetry for low X-ray doses is a very important control of radiation practice in medical diagnostic radiology. In line with this, the current study proposes a valuable dosimeter-based PVA thin film doubly doped with silver nitrate salt and nitro blue tetrazolium dye. The nanocomposite film was prepared via a simple casting method and the different processing parameters were optimized. The performance of radiation detection was evaluated according to optical, chromic, chemical and structural changes after exposure to variable low X-ray doses (0, 2, 4, 10 and 20 mGy). The different film labels exhibited an excellent stability behavior in dark and light upon 30 days of storage. The UV-Vis spectrophotometric study showed a gradual increase in the maximum absorbance as a function of the dose and the corresponding response curve confirmed this linear variation (R = 0.998). A clear structural modification was recorded via X-ray diffraction (XRD) analysis revealing the increase in crystallinity with the level of the dose received by the nanocomposite films. Microscopic surface analysis via SEM assessments revealed a significant morphological change in PVA/Ag+/NBT films exposed to increased radiation doses and typical dendrites growing in needle- or tree-like microstructures appeared with a high X-ray dose. Finally, the nanocomposite films before and after irradiation were evaluated via a spectrocolorimetric study and the different CIELab coordinates, the color difference, as well as the color strength, showed a linear correlation with the intensity of the applied dose. This new dosimeter design could, therefore, provide a promising and efficient alternative for prompt and accurate detection of low X-rays doses in diagnostic radiology