41 research outputs found
Estimativa de risco devido à ingestão de isótopos de urânio em fontes de águas minerais
Recommended from our members
The Toxicity of Polonium 210 in Mice. [Part] 1. The 30-Day LD, Retention, and Distribution
A Note on Quantitative Aspects of Radiostrontium Retention by Mice on Different Dietary Levels of Phosphorus
Free-Space Subterahertz-Field Polarization Controlled by Selection of Waveguide Modes
We experimentally study the free-space electromagnetic field emitted from a multimode rectangular waveguide equipped with a diagonal-horn antenna. Using the frequency range of 215-580 GHz, a photomixer is used to launch a free-space circularly polarized electromagnetic field, exciting multiple modes at the input of the rectangular waveguide via an input diagonal-horn antenna. A second photomixer is used, together with a silicon mirror Fresnel scatterer, to act as a polarization-sensitive coherent detector to characterize the emitted field. We find that the radiated field, excited by the fundamental waveguide mode, is characterized by a linear polarization. In addition, we find that the polarization of the radiated field rotates by 45 if selectively exciting higher-order modes in the waveguide. Despite the higher-order modes, the radiated field appears to maintain a predominant Gaussian beam character, since an unidirectional coupling to a detector was possible, whereas the unidirectionality is independent of the frequency. We discuss a possible application of this finding. QN/Klapwijk LabQN/AfdelingsbureauQCD/DiCarlo La
Analysis of a single-mode waveguide at sub-terahertz frequencies as a communication channel
We study experimentally the transmission of an electromagnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to 80 dB and with high frequency-resolution. The modified transmission function is directly related to the information rate of the waveguide, which we estimate to be about 1 bit per photon. We suggest that the results are applicable to a Josephson junction employed as a single-photon source and coupled to a superconducting waveguide to achieve a simple on-demand narrow-bandwidth free-space number-state quantum channel.QN/Klapwijk LabQN/Afdelingsburea
Shielded cantilever with on-chip interferometer circuit for THz scanning probe impedance microscopy
We have realized a microstrip based terahertz (THz) near field cantilever that enables quantitative measurements of the impedance of the probe tip at THz frequencies (0.3 THz). A key feature is the on-chip balanced hybrid coupler that serves as an interferometer for passive signal cancellation to increase the readout circuit sensitivity despite extreme impedance mismatch at the tip. We observe distinct changes in the reflection coefficient of the tip when brought into contact with different dielectric (Si, SrTiO3) and metallic samples (Au). By comparing finite element simulations, we determine the sensitivity of our THz probe to be well below 0.25 fF. The cantilever further allows for topography imaging in a conventional atomic force microscope mode. Our THz cantilever removes several critical technology challenges and thus enables a shielded cantilever based THz near field microscope.Accepted Author ManuscriptQN/Klapwijk LabQN/AfdelingsbureauElectronic
Local Electrodynamics of a Disordered Conductor Model System Measured with a Microwave Impedance Microscope
We study the electrodynamic impedance of percolating conductors with a predefined network topology using a scanning microwave impedance microscope at gigahertz frequencies. For a given percolation number we observe strong spatial variations across a sample that correlate with the connected regions (clusters) in the network when the resistivity is low such as in aluminum. For the more-resistive material (Nb,Ti)N, the impedance becomes dominated by the local structure of the percolating network (connectivity). The results can be qualitatively understood and reproduced with a network current-spreading model based on the pseudoinverse Laplacian of the underlying network graph.QN/Klapwijk LabNetwork Architectures and ServicesQN/Afdelingsburea