Influence of ink rheology and post processing in the structural performance of silicon nitride-based ceramics fabricated by robocasting

The fabrication of complex shaped Si3N4 parts by conventional methods is challenging due to its high hardness and mechanical strength. Additive manufacturing (AM) appeared as a competitive way to attain three-dimensional complexity at lower costs. However, most of AM technologies still present limitations in producing high dense ceramics, mainly due to several difficulties in developing proper feedstock. This work presents the fabrication of dense silicon nitride-based ceramics by using an extrusion based additive manufacturing technique (direct ink writing, also known as robocasting) and cold isostatic pressing (CIP) as a post processing step. Silicon-nitride aqueous based inks containing different amounts of solids loading (36, 38 and 39 vol%) and proper rheological characteristics for the printing process were studied. The use of CIP (200 MPa) is suggested to reduce or even eliminate defects and porosity and consequently, to improve mechanical performance of the final parts. Relative density, microhardness and flexural strength increased as solids loading in the inks increased and were further improved when CIP pressing was used. Parts produced by robocasting with an ink containing 39 vol% and cold isostatic pressed at 200 MPa exhibited an average relative density around 99%, 1475 HV2 microhardness value and 650 MPa flexural strength, values similar to those of silicon nitride ceramics fabricated by conventional processing.publishe

Modeling and learning from the design recommendations for California's Greenhouse Gas Cap-and-Trade System

Thesis (S.M.)--Massachusetts Institute of Technology, System Design and Management Program, 2008.Includes bibliographical references (leaf 71).Climate Change has become a Major issue beginning with our generation. Governments the world over are now recognizing that industry cannot continue to pollute in a business-as-usual manner. Emitting Greenhouse gases has a global impact, unlike pollutants that are released into soil or water. Global warming created by the Greenhouse effect, amongst other things is causing an increase in the ambient global temperature, causing glaciers to melt and global weather patterns to change. At the same time the world population is increasing, the standard of living for an increasing percentage of the population is improving, and with that the global energy usage is going up and up. Currently, a large portion of the global energy is derived from fossil fuels. Combusting fossil fuels are the primary source of Greenhouse gas emissions. The challenge for governments then is two-fold. One is how to cap and/or reduce the Greenhouse gases from industry, and second, how to achieve this first goal without being detrimental to the industry in a large way, or as some say with the least cost. In the USA, due to lack of a federal standard, several states have either banded together or gone it alone, in defining their own attempt to address the Greenhouse gas problem. The state of California is one such state that has put together a committee of experts, to advise the state on how best to design a system with the two afore-said challenges in mind. A model has been put together to model Option A, Program Design 1 of the California Cap-and-Trade system.(cont.) The goal of the model is to give the regulator an understanding of how by varying the main lever, which is the cap set, the regulator can influence the covered Electric entities in optimally meeting the cap, based on the headroom they have for abatement, and their actual ability to act and the degree to which they can act in abatement; and secondly how this main lever, can create a thriving market for trading allowances, by trying to have almost an equal number of players that want to buy the requisite number of allowances to meet the cap, or sell their excess allowances.by Chester Fernandes.S.M

Convolutamydine A and synthetic analogues have antinociceptive properties in mice

AbstractConvolutamydine A, an oxindole that originated from a marine bryozoan, has several biological effects. In this study, we aimed to investigate the antinociceptive effects of convolutamydine A and two new synthetic analogues.Convolutamydine A and the two analogues were given orally to assess their ability to induce antinociceptive effects. Formalin-induced licking response, acetic acid-induced contortions, and hot plate models were used to characterize the effects of convolutamydine A and its analogues.Convolutamydine A (4,6-bromo-3-(2-oxopropyl)-3-hydroxy-2-oxindole), compound 1 (3-(2-oxopropyl)-3-hydroxy-2-oxindole), and compound 2 (5-bromo-3-(2-oxopropyl)-3-hydroxy-2-oxindole) caused peripheral antinociceptive and anti-inflammatory effects in the acetic acid-induced contortions and the formalin-induced licking models. Supraspinal effects were also observed in the hot plate model and were similar to those obtained with morphine. The peripheral effects were not mediated by the cholinergic or opioid systems. The antinociceptive effects of convolutamydine A seem to be mediated by all three systems (cholinergic, opioid, and nitric oxide systems), and the mechanism of action of compounds 1 and 2 involved cholinergic and nitric oxide-mediated mechanisms. Convolutamydine A and its analogues (compounds 1 and 2) showed good antinociceptive ability after systemic administration in acute pain models. The antinociceptive action mediated by cholinergic, opioid, and nitric oxide systems could explain why convolutamydine A, compound 1, and compound 2 retained their antinociceptive effects. The doses used were similar to the doses of morphine and were much lower than that of acetylsalicylic acid, the classical analgesic and anti-inflammatory drug.In conclusion, convolutamydine A and the two analogues demonstrated antinociceptive effects comparable to morphine's effects

Imaging of 3D tissue-engineered models of oral cancer using 890 and 1300 nm optical coherence tomography

© 2015, Nizhny Novgorod State Medical Academy. All rights reserved. Optical coherence tomography (OCT) generates its primary form of contrast from elastic backscatter. It is now the gold standard technique for retinal screening and is emerging rapidly in cardiovascular research however it remains a research goal to establish it to the same degree in epithelial cancer detection and diagnosis. In this report we compare two different OCT systems: an 890 nm spectrometer-based OCT system with 2.5 µm axial resolution and a 1300 nm swept-source OCT system with 7.5 µm axial resolution to determine the effect of these different OCT parameters on the endogenous backscatter contrast of dysplastic/malignant oral mucosa models relative to normal mucosa models. Tissueengineered oral mucosa models constructed with a dysplastic cell line (DOK), a malignant cell line (Cal27) and normal cell were imaged with both of these OCT platforms and comparisons made with regard to apparent epithelial thickness and the visibility of the epithelium relative to the underlying stroma. For the Cal27’s, hematoxylin and eosin staining confirmed the formation of a keratinized layer superficial to a thickened layer of viable cells on top of the stroma. The keratinized layer presented as a hyperreflective thickened layer superficial to a darker region on both OCT platforms. The keratinized layer caused a steep fall in signal at 890 nm, making it difficult to visualise underlying structures, whereas 1300 nm OCT clearly visualized both the epithelial cells and the stroma lying beneath. For the DOK cells, hematoxylin and eosin staining confirmed the formation of an epithelial layer frequently presenting an abnormal morphology especially at the epidermal/stromal junction, with features such as infiltrating, bulbous rete pegs. These were more clearly visualized under 890 nm OCT. These observations show that 890 nm OCT retains some of its known advantages of higher contrast between anatomical tissue layers when used to observe dysplastic and malignant 3D oral mucosa constructs. However 1300 nm OCT is confirmed to possess a greater ability to image the full thickness of the model epithelia and in particular it is more suited to imaging through the keratinized layer

Stellar populations of classical and pseudo-bulges for a sample of isolated spiral galaxies

In this paper we present the stellar population synthesis results for a sample of 75 bulges in isolated spiral Sb-Sc galaxies, using the spectroscopic data from the Sloan Digital Sky Survey and the STARLIGHT code. We find that both pseudo-bulges and classical bulges in our sample are predominantly composed of old stellar populations, with mean mass-weighted stellar age around 10 Gyr. While the stellar population of pseudo-bulges is, in general, younger than that of classical bulges, the difference is not significant, which indicates that it is hard to distinguish pseudo-bulges from classical bulges, at least for these isolated galaxies, only based on their stellar populations. Pseudo-bulges have star formation activities with relatively longer timescale than classical bulges, indicating that secular evolution is more important in this kind of systems. Our results also show that pseudo-bulges have a lower stellar velocity dispersion than their classical counterparts, which suggests that classical bulges are more dispersion-supported than pseudo-bulges.Comment: 10 pages, 8 figures. Accepted for publication in Astrophysics & Space Scienc

Inclusión de calix[4]areno en una matriz de sílice-titania: preparación, caracterización y aplicación como catalizador heterogéneo en epoxidación de alquenos

Se preparó una matriz mixta de sílice y titania con calix[4]areno incluido. Los calix[n]arenos son compuestos macrocíclicos integrados por n unidades fenólicas, unidas por grupos metileno en las posiciones 2 y

Individual responses to topical ibuprofen gel or capsaicin cream for painful knee osteoarthritis: a series of n-of-1 trials

OBJECTIVES: To determine individual responses to ibuprofen gel or capsaicin cream for painful, radiographic knee OA using a series of n-of-1 trials. METHODS: Twenty-two participants were allocated 5% ibuprofen gel (A) and 0.025% capsaicin cream (B) in random sequence (AB or BA). Patients underwent up to 3 treatment cycles, each comprising one treatment for 4 weeks, an individualized washout period (maximum 4 weeks), then the other treatment for 4 weeks. Differential (ibuprofen or capsaicin) response was defined when change-from-baseline pain intensity scores (0-10 NRS) differed by ≥1 between treatments in ≥2 cycles within a participant. RESULTS: A total of 104 treatment periods were aggregated. Mean pain reduction was 1.2 (95% CI: 0.5, 1.8) on ibuprofen and 1.6 (95% CI: 0.9, 2.4) on capsaicin (P = 0.221). Of 22 participants, 4 (18%) had a greater response to ibuprofen, 9 (41%) to capsaicin, 4 (18%) had similar responses, and 5 (23%) were undetermined. CONCLUSION: Irrespective of equal efficacy overall, 59% of people displayed a greater response to one treatment over the other. Patients who do not benefit from one type of topical treatment should be offered to try another, which may be more effective. N-of-1 trials are useful to identify individual response to treatment. CLINICAL TRIAL REGISTRATION: https://clinicaltrials.gov, NCT03146689