272 research outputs found
Effective modeling of high-energy laboratory-based x-ray phase contrast imaging utilizing absorption masks or gratings
Model refinements for the edge illumination x-ray phase contrast imaging method have been developed to improve simulation accuracy for high energy, polychromatic beams. High-energy x rays are desirable in imaging due to their penetrative power and, for biological samples, their lower dose deposition rate. Accurate models of such scenarios are required for designing appropriate imaging systems and to predict signal strength in complex settings such as clinical imaging or industrial quality assurance. When using optical components appropriate for high-energy x rays in a non-synchrotron setting, system performance was observed to deviate from that predicted by existing models. In this work, experimental data utilizing increasing thicknesses of a known filter material are used to illustrate the limitations of existing models and as validation for the new modeling features. Angular filtration of the cone beam was observed to be the most significant effect; however, specific features of the source and detector are also shown to affect system performance. We conclude by showing that a significantly improved agreement between experimental and simulated data is obtained with the refined model compared to previously existing ones
Characterization of fast magnetosonic waves driven by interaction between magnetic fields and compact toroids
Magnetosonic waves are low-frequency, linearly polarized magnetohydrodynamic
(MHD) waves that can be excited in any electrically conducting fluid permeated
by a magnetic field. They are commonly found in space, responsible for many
well-known features, such as heating of the solar corona and acceleration of
energetic electrons in Earth's inner magnetosphere. In this work, we present
observations of magnetosonic waves driven by injecting compact toroid (CT)
plasmas into a static Helmholtz magnetic field at the Big Red Ball (BRB)
Facility at Wisconsin Plasma Physics Laboratory (WiPPL). We first identify the
wave modes by comparing the experimental results with the MHD theory, and then
study how factors such as the background magnetic field affect the wave
properties. Since this experiment is part of an ongoing effort of forming a
target plasma with tangled magnetic fields as a novel fusion fuel for
magneto-inertial fusion (MIF, aka magnetized target fusion), we also discuss a
future possible path of forming the target plasma based on our current results
The Wisconsin Plasma Astrophysics Laboratory
The Wisconsin Plasma Astrophysics Laboratory (WiPAL) is a flexible user
facility designed to study a range of astrophysically relevant plasma processes
as well as novel geometries that mimic astrophysical systems. A multi-cusp
magnetic bucket constructed from strong samarium cobalt permanent magnets now
confines a 10 m, fully ionized, magnetic-field free plasma in a spherical
geometry. Plasma parameters of to eV and
to cm provide an ideal testbed
for a range of astrophysical experiments including self-exciting dynamos,
collisionless magnetic reconnection, jet stability, stellar winds, and more.
This article describes the capabilities of WiPAL along with several
experiments, in both operating and planning stages, that illustrate the range
of possibilities for future users.Comment: 21 pages, 12 figures, 2 table
Dynamic Multicontrast X-Ray Imaging Method Applied to Additive Manufacturing
We present a dynamic implementation of the beam-tracking x-ray imaging method providing absorption, phase, and ultrasmall angle scattering signals with microscopic resolution and high frame rate. We demonstrate the method’s ability to capture dynamic processes with 22-ms time resolution by investigating the melting of metals in laser additive manufacturing, which has so far been limited to single-modality synchrotron radiography. The simultaneous availability of three contrast channels enables earlier segmentation of droplets, tracking of powder dynamic, and estimation of unfused powder amounts, demonstrating that the method can provide additional information on melting processes
Monochromatic Propagation-Based Phase-Contrast Microscale Computed-Tomography System with a Rotating-Anode Source
We present an experimental setup for monochromatic propagation-based x-ray phase-contrast imaging based on a conventional rotating-copper-anode source, capable of an integrated flux up to 108 photons/s at 8 keV. In our study, the system is characterized in terms of spatial coherence, resolution, contrast sensitivity, and stability. Its quantitativeness is demonstrated by comparing theoretical predictions with experimental data on simple wire phantoms both in planar and computerized-tomography-scan geometries. Application to two biological samples of medical interest shows the potential for bioimaging on the millimeter scale with spatial resolution of the order of 10 \u3bcm and contrast resolution below 1%. All the scans are performed within laboratory-compatible exposure times, from 10 min to a few hours, and trade-offs between scan time and image quality are discussed
Femtosecond multimodal imaging with a laser-driven X-ray source
Laser-plasma accelerators are compact linear accelerators based on the interaction of high-power lasers with plasma to form accelerating structures up to 1000 times smaller than standard radiofrequency cavities, and they come with an embedded X-ray source, namely betatron source, with unique properties: small source size and femtosecond pulse duration. A still unexplored possibility to exploit the betatron source comes from combining it with imaging methods able to encode multiple information like transmission and phase into a single-shot acquisition approach. In this work, we combine edge illumination-beam tracking (EI-BT) with a betatron X-ray source and present the demonstration of multimodal imaging (transmission, refraction, and scattering) with a compact light source down to the femtosecond timescale. The advantage of EI-BT is that it allows multimodal X-ray imaging technique, granting access to transmission, refraction and scattering signals from standard low-coherence laboratory X-ray sources in a single shot
Quantification of microbubble concentration through x-ray phase contrast imaging
The use of microbubbles as a contrast agent for x-ray phase contrast imaging could both transform x-ray imaging into a “functional” modality and enable much needed monitoring of targeted drug delivery. To realize these benefits, it is essential to be able to quantify bubble concentration in a given tissue volume. We developed and validated a model that enables this to be achieved not only for phase-retrieved images obtained by processing multiple frames but also on “single-shot” images, a likely necessity in in-vivo implementations. Our experimental validation was based on analyzer-based imaging, but extension to other phase-based modalities is straightforward
- …