Glycosylated Ang-(1-7) MasR Agonist Peptide Poly Lactic-co-Glycolic Acid (PLGA) Nanoparticles and Microparticles in Cognitive Impairment: Design, Particle Preparation, Physicochemical Characterization, and In Vitro Release

Heart failure (HF) causes decreased brain perfusion in older adults, and increased brain and systemic inflammation increases the risk of cognitive impairment and Alzheimer’s disease (AD). Glycosylated Ang-(1-7) MasR agonists (PNA5) has shown improved bioavailability, stability, and brain penetration compared to Ang-(1-7) native peptide. Despite promising results and numerous potential applications, clinical applications of PNA5 glycopeptide are limited by its short half-life, and frequent injections are required to ensure adequate treatment for cognitive impairment. Therefore, sustained-release injectable formulations of PNA5 glycopeptide are needed to improve its bioavailability, protect the peptide from degradation, and provide sustained drug release over a prolonged time to reduce injection administration frequency. Two types of poly(D,L-lactic-co-glycolic acid) (PLGA) were used in the synthesis to produce nanoparticles (≈0.769–0.35 µm) and microparticles (≈3.7–2.4 µm) loaded with PNA5 (ester and acid-end capped). Comprehensive physicochemical characterization including scanning electron microscopy, thermal analysis, molecular fingerprinting spectroscopy, particle sizing, drug loading, encapsulation efficiency, and in vitro drug release were conducted. The data shows that despite the differences in the size of the particles, sustained release of PNA5 was successfully achieved using PLGA R503H polymer with high drug loading (% DL) and high encapsulation efficiency (% EE) of >8% and >40%, respectively. While using the ester-end PLGA, NPs showed poor sustained release as after 72 h, nearly 100% of the peptide was released. Also, lower % EE and % DL values were observed (10.8 and 3.4, respectively). This is the first systematic and comprehensive study to report on the successful design, particle synthesis, physicochemical characterization, and in vitro glycopeptide drug release of PNA5 in PLGA nanoparticles and microparticles

Design, Development, Physicochemical Characterization, and In Vitro Drug Release of Formoterol PEGylated PLGA Polymeric Nanoparticles

Polymeric nanoparticles’ drug delivery systems represent a promising platform for targeted controlled release since they are capable of improving the bioavailability and tissue localization of drugs compared to traditional means of administration. Investigation of key parameters of nanoparticle preparation and their impact on performance, such as size, drug loading, and sustained release, is critical to understanding the synthesis parameters surrounding a given nanoparticle formulation. This comprehensive and systematic study reports for the first time and focuses on the development and characterization of formoterol polymeric nanoparticles that have potential application in a variety of acute and chronic diseases. Nanoparticles were prepared by a variety of solvent emulsion methods with varying modifications to the polymer and emulsion system with the aim of increasing drug loading and tuning particle size for renal localization and drug delivery. Maximal drug loading was achieved by amine modification of polyethylene glycol (PEG) conjugated to the poly(lactic-co-glycolic acid) (PLGA) backbone. The resulting formoterol PEGylated PLGA polymeric nanoparticles were successfully lyophilized without compromising size distribution by using either sucrose or trehalose as cryoprotectants. The physicochemical characteristics of the nanoparticles were examined comprehensively, including surface morphology, solid-state transitions, crystallinity, and residual water content. In vitro formoterol drug release characteristics from the PEGylated PLGA polymeric nanoparticles were also investigated as a function of both polymer and emulsion parameter selection, and release kinetics modeling was successfully applied. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

Glycosylated Ang-(1-7) MasR Agonist Peptide Poly Lactic-co-Glycolic Acid (PLGA) Nanoparticles and Microparticles in Cognitive Impairment: Design, Particle Preparation, Physicochemical Characterization, and In Vitro Release

Heart failure (HF) causes decreased brain perfusion in older adults, and increased brain and systemic inflammation increases the risk of cognitive impairment and Alzheimer’s disease (AD). Glycosylated Ang-(1-7) MasR agonists (PNA5) has shown improved bioavailability, stability, and brain penetration compared to Ang-(1-7) native peptide. Despite promising results and numerous potential applications, clinical applications of PNA5 glycopeptide are limited by its short half-life, and frequent injections are required to ensure adequate treatment for cognitive impairment. Therefore, sustained-release injectable formulations of PNA5 glycopeptide are needed to improve its bioavailability, protect the peptide from degradation, and provide sustained drug release over a prolonged time to reduce injection administration frequency. Two types of poly (D, L-lactic-co-glycolic acid) (PLGA) were used in the synthesis to produce nanoparticles (≈0.769–0.35 µm) and microparticles (≈3.7–2.4 µm) loaded with PNA5 (ester and acid-end capped). Comprehensive physicochemical characterization including scanning electron microscopy, thermal analysis, molecular fingerprinting spectroscopy, particle sizing, drug loading, encapsulation efficiency, and in vitro drug release were conducted. The data shows that despite the differences in the size of the particles, sustained release of PNA5 was successfully achieved using PLGA R503H polymer with high drug loading (% DL) and high encapsulation efficiency (% EE) of >8% and >40%, respectively. While using the ester-end PLGA, NPs showed poor sustained release as after 72 h, nearly 100% of the peptide was released. Also, lower % EE and % DL values were observed (10.8 and 3.4, respectively). This is the first systematic and comprehensive study to report on the successful design, particle synthesis, physicochemical characterization, and in vitro glycopeptide drug release of PNA5 in PLGA nanoparticles and microparticles. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

Nose-to-Brain Delivery of Therapeutic Peptides as Nasal Aerosols

Central nervous system (CNS) disorders, such as psychiatric disorders, neurodegeneration, chronic pain, stroke, brain tumor, spinal cord injury, and many other CNS diseases, would hugely benefit from specific and potent peptide pharmaceuticals and their low inherent toxicity. The delivery of peptides to the brain is challenging due to their low metabolic stability, which decreases their duration of action, poor penetration of the blood-brain barrier (BBB), and their incompatibility with oral administration, typically resulting in the need for parenteral administration. These challenges limit peptides’ clinical application and explain the interest in alternative routes of peptide administration, particularly nose-to-brain (N-to-B) delivery, which allows protein and peptide drugs to reach the brain noninvasively. N-to-B delivery can be a convenient method for rapidly targeting the CNS, bypassing the BBB, and minimizing systemic exposure; the olfactory and trigeminal nerves provide a unique pathway to the brain and the external environment. This review highlights the intranasal delivery of drugs, focusing on peptide delivery, illustrating various clinical applications, nasal delivery devices, and the scope and limitations of this approach

Inhalation Delivery for the Treatment and Prevention of COVID-19 Infection

Coronavirus disease-2019 (COVID-19) is caused by coronavirus-2 (SARS-CoV-2) and has produced a global pandemic. As of 22 June 2021, 178 million people have been affected worldwide, and 3.87 million people have died from COVID-19. According to the Centers for Disease Control and Prevention (CDC) of the United States, COVID-19 virus is primarily transmitted between people through respiratory droplets and contact routes. Since the location of initial infection and disease progression is primarily through the lungs, the inhalation delivery of drugs directly to the lungs may be the most appropriate route of administration for treating COVID-19. This review article aims to present possible inhalation therapeutics and vaccines for the treatment of COVID-19 symptoms. This review covers the comparison between SARS-CoV-2 and other coronaviruses such as SARS-CoV/MERS, inhalation therapeutics for the treatment of COVID-19 symptoms, and vaccines for preventing infection, as well as the current clinical status of inhaled therapeutics and vaccines

Innovative Rocuronium Bromide Topical Formulation for Targeted Skin Drug Delivery: Design, Comprehensive Characterization, In Vitro 2D/3D Human Cell Culture and Permeation

Cutaneous squamous cell carcinoma (cSCC) is the second-most common type of non-melanoma skin cancer and is linked to long-term exposure to ultraviolet (UV) radiation from the sun. Rocuronium bromide (RocBr) is an FDA-approved drug that targets p53-related protein kinase (PRPK) that inhibits the development of UV-induced cSCC. This study aimed to investigate the physicochemical properties and in vitro behavior of RocBr. Techniques such as thermal analysis, electron microscopy, spectroscopy and in vitro assays were used to characterize RocBr. A topical oil/water emulsion lotion formulation of RocBr was successfully developed and evaluated. The in vitro permeation behavior of RocBr from its lotion formulation was quantified with Strat-M® synthetic biomimetic membrane and EpiDerm™ 3D human skin tissue. Significant membrane retention of RocBr drug was evident and more retention was obtained with the lotion formulation compared with the solution. This is the first systematic and comprehensive study to report these findings. © 2023 by the authors.Open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

Hydrophobic Chitosan Nanoparticles Loaded with Carvacrol against Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa infections have become more challenging to treat and eradicate due to their ability to form biofilms. This study aimed to produce hydrophobic nanoparticles by grafting 11-carbon and three-carbon alkyl chains to a chitosan polymer as a platform to carry and deliver carvacrol for improving its antibacterial and antibiofilm properties. Carvacrol–chitosan nanoparticles showed ζ potential values of 10.5–14.4 mV, a size of 140.3–166.6 nm, and an encapsulation efficiency of 25.1–68.8%. Hydrophobic nanoparticles reduced 46–53% of the biomass and viable cells (7–25%) within P. aeruginosa biofilms. Diffusion of nanoparticles through the bacterial biofilm showed a higher penetration of nanoparticles created with 11-carbon chain chitosan than those formulated with unmodified chitosan. The interaction of nanoparticles with a 50:50 w/w phospholipid mixture at the air–water interface was studied, and values suggested that viscoelasticity and fluidity properties were modified. The modified nanoparticles significantly reduced viable P. aeruginosa in biofilms (0.078–2.0 log CFU·cm−2) and swarming motility (40–60%). Furthermore, the formulated nanoparticles reduced the quorum sensing in Chromobacterium violaceum. This study revealed that modifying the chitosan polarity to synthesize more hydrophobic nanoparticles could be an effective treatment against P. aeruginosa biofilms to decrease its virulence and pathogenicity, mainly by increasing their ability to interact with the membrane phospholipids and penetrate preformed biofilms

Design, Physicochemical Characterization, and In Vitro Permeation of Innovative Resatorvid Topical Formulations for Targeted Skin Drug Delivery

Nonmelanoma skin cancers (NMSCs) are the most common malignancies worldwide and affect more than 5 million people in the United States every year. NMSC is directly linked to the excessive exposure of the skin to solar ultraviolet (UV) rays. The toll-like receptor 4 (TLR4) antago-nist, resatorvid (TAK-242), is a novel prototype chemo preventive agent that suppresses the production of inflammation mediators induced by UV exposure. This study aimed to design and de-velop TAK-242 into topical formulations using FDA-approved excipients, including DermaBase™, PENcream™, polyethylene glycol (PEG)-400, propylene glycol (PG), carbomer gel, hyaluronic acid (HA) gel, and Pluronic® F-127 poloxamer triblock copolymer gel for the prevention of skin cancer. The physicochemical properties of raw TAK-242, which influence the compatibility and solubility in the selected base materials, were confirmed using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), hot-stage microscopy (HSM), Raman spectroscopy, and attenuated to-tal reflectance Fourier-transform infrared (ATR-FTIR) spectroscopic analysis. The permeation behavior of TAK-242 from the prepared formulations was determined using Strat-M® transdermal diffusion membranes, and 3D cultured primary human-derived epidermal keratinocytes (Epi-Derm™). Despite TAK-242′s high molecular weight and hydrophobicity, it can permeate through reconstructed human epidermis from all formulations. The findings, reported for the first time in this study, emphasize the capabilities of the topical application of TAK-242 via these multiple innovative topical drug delivery formulation platforms. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

Estudio multicéntrico prospectivo observacional sobre implantes PIP® colocados en 12 años

A pesar de la controversia existente con los implantes PIP® (Poly Implant Prothèse, Francia) son pocos los estudios que existen al respecto, por lo que determinamos realizar un análisis multicéntrico en nuestro entorno para conocer las características y el comportamiento clínico de los mismos. Planteamos un estudio multicéntrico, prospectivo y observacional, en el que participaron 7 cirujanos plásticos certificados que durante un periodo de 12 años habían colocado implantes PIP®. Analizamos clínicamente y con ultrasonido mamario todas las pacientes que acudieron a revisión, recogimos todos los datos y cuantificamos los hallazgos en aquellas que se intervinieron quirúrgicamente para revisión de los implantes. Entre enero del 2012 y febrero del 2013 acudieron a consulta 184 pacientes de las 1.315 que habían sido operados entre 1998 y 2010 (14%), evaluando un total de 368 implantes. Solo 39 pacientes (21,2%) presentaban sintomatología. Mediante ultrasonido mamario, 322 implantes (87,5%) fueron informados como íntegros y 46 (12,5%) rotos. Del total de pacientes revisadas, 55 (30%) no se reoperaron por no tener datos de rotura, mientras que 129 pacientes (70%) decidieron operarse. De ellos, solo 46 presentaban datos de rotura ecográfica (36%). Durante la cirugía se encontraron 213 implantes íntegros (83%) y 45 implantes rotos (17, 8%). No se encontraron datos de malignidad en las piezas de biopsia tomadas de las cápsulas o en el líquido periprotésico; tampoco crecimiento bacteriano. El índice de rotura comprobada, 17,8%, fue mayor que el que presentan otros estudios pero que tienen tiempos de seguimiento más cortos. No se encontró irritación de tejidos o sintomatología mamaria en los implantes íntegros, ni datos de toxicidad en las cápsulas o en el líquido en los implantes rotos. En base a todo ello consideramos que no es mandatorio retirar los implantes PIP® como medida de rutina, sino hacerlo cuando exista evidencia o sospecha de rotura. Creemos que el ultrasonido mamario es un estudio altamente confiable para la evaluación de la integridad de estos implantes