Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

Providing efficient and environmental friendly ways to recover lignocellulosic waste remains a challenge around the world. In this study, citric acid-catalyzed hydrothermal carbonization (CHTC) was coupled with pyrolysis to convert date seed (Ds) into adsorbent material. In this regard, a central composite design (CCD) using response surface methodology (RSM) was developed to examine the influence of temperature, reaction time, and catalyst dose on the mass yield (Ym(%)) and carbon retention rate (CRR(%)) in the produced hydrochars. The optimized hydrochar (OHC-Ds) was obtained under optimal conditions (200°C, 120 min, 20 mg) and characterized by a Ym(%) and CRR(%) of 59.71% and 75.84%, respectively. Chemical activation by KOH of OHC-Ds followed by pyrolysis at 600°C resulted in an active material (AOHC-Ds) rich in carbon and characterized by a high specific surface area of 1251.5 m2/g, with the dominance of mesopores, as well as an amorphous structure comparable to graphite shown by X-ray diffraction (XRD) analysis. Adsorption experiments of two dyes on AOHC-Ds showed a high maximum adsorption capacity (Qm) of 657.89 mg g−1 for methylene blue (MB) and 384.61 mg g−1 for methyl orange (MO) compared to other conventional adsorbents. This result is due to the low acidity (pHpzc) of the surface of AOHC-Ds, which equals 6.75, and its surface, which is also rich in oxygenated functional groups such as (-OH), (C=O), and (C-O) shown by FTIR analysis. These results suggest that the coupling of CHTC and KOH activation followed by pyrolysis is an encouraging way to prepare an efficient and inexpensive adsorbent to remove dyes in wastewater

Chemical Composition and Antimicrobial Activity of Essential Oil of Wild and Cultivated Rosmarinus Officinalis from Two Moroccan Localities

This research aimed to measure the impact of provenance on the yield, chemical profile and antimicrobial activity of Rosmarinus officinalis essential oil (EO) collected from cultivated and wild plants from two different regions in Morocco (Fez and Figuig). The chemical composition analysis was accomplished utilizing the GC-MS techniques. Sixteen compounds were identified in the EO of both samples, dominated by 1,8-cineole (32.18%), camphor (16.20%) and α-pinene (15.40%) in cultivated type. The α-pinene (51.19) presents the majority compound in the rosemary samples collected from the wild populations.The antimicrobial activity was investigated by using the broth dilution methods against yeast, four bacterial strains and two molds. Rosemary aerial part provided EO with the highest yield and comes from Figuig. The GC-MS analysis demonstrated the existence of two chemotypes of oils: α-pinene as well as 1,8-cineole/camphor/α-pinene. Both EOs showed good antimicrobial activity against all microbial strains. The essential oil produced by Fez plants was the most effective against the selected microorganisms having MIC values of 0.315–2.5 mg/L

Cactus and Holm Oak Acorn for Efficient Textile Wastewater Treatment by Coagulation-Flocculation Process Optimization Using Box-Benhken Design

In this study, the effectiveness of using natural bio-coagulants and bio-flocculants to treat textile wastewater through the coagulation-flocculation method was examined. These bio-based agents have several advantages over chemical agents, including biodegradability, natural abundance, low toxicity, and low cost. A bio-coagulant (holm oak acorn (HOA)) and a bio-flocculant (cactus juice) were used to investigate the capacity for turbidity removal and decolorization of textile wastewater. The UV spectrophotometer was used to characterize the discharges before and after treatment, and the chemical oxygen demand (COD) and biological oxygen demand (BOD5) levels were calculated. Box-Behnken design (BBD) coupled with response surface methodology (RSM) were utilized to optimize the process and reduce turbidity and decolorization in textile wastewater. The obtained results show that under the optimal conditions (0.5 g•L-1 of HOA, 15 mL•L-1 of cactus juice, and a pH of 7), decolorization and turbidity removal were achieved at 69% and 90%, respectively. This study demonstrates the potential of using bio-coagulants and bio-flocculants in the treatment of textile wastewater

Application of the Plackett-Burman Design on Soil Fertility Determinants

In the present review article, a soil from the region of Fez-Sefrou Morocco was screened for some physicochemical characteristics using the Plackett-Burman model in order to determine the most important factors that promote its fertility. Five independent variables were selected: pH, electrical conductivity, humidity, organic matter, and C/N ratio. These variables were evaluated by statistical analysis, based on their significance, the value of the coefficient of determination and the Pareto chart. The results suggest that humidity and C/N ratio have an influence with a high level of confidence, while the other three show no significant effect on the content of nutrients in the soil. The analysis of the R2 variance value also showed that the models used for prediction were large and significant factors (p less than 0.05). Pareto chart plots for each response and its characteristics provided accurate data to select well-fitting variables for further optimization

Geographical Origin and Solvent Type Impact on Inula Viscosa (L.) Aiton Grown in El Menzel, Morocco – Insights into Bioactivity and Applications

Geographical origin and environmental factors have a significant impact on the constituents and the biological properties of medicinal and aromatic plants. Herein, we investigated the Inula viscosa plant grown in El Menzel - Morocco, with a focus on the impact of geographical pronvince and solvent type on the mass yield and the biological activities of plant extracts. Chemical composition was characterized by gas chromatography/mass spectrometry (GC/MS). Antimicrobial activity was determined using the disk diffusion method and the microdilution test against eight clinical fungal, Gram-positive and Gram-negative bacterial isolates. Chemical composition results showed that the plant has good nutritional quality in terms of protein, carbohydrates, lipids and dietary fibre. In fact, alkaloids and saponisides are the most predominant chemical compounds in Inula Vuscosa. Meanwhile, eighty volatile compounds were identified, representing 95% of the total essential oil content, the main component of which is tetra-pentacontane (11.26%). Furthermore, results showed high antioxidant activity, with efficacy increasing in the order: Essential Oil > Chloroform extract > Ethereal extract > Ethanolic extract. In addition, both chloroformic extract and essential oil demonstrated significant antibacterial activity against all strains tested. This study highlights the influence of geographical variations and extraction solvents on the bioactivity of Inula viscosa, offering insights into its potential applications in pharmacology and nutraceuticals

Acid assisted-hydrothermal carbonization of solid waste from essential oils industry: Optimization using I-optimal experimental design and removal dye application

Solid waste (SW) generated from extracting of essential oils from medicinal and aromatic plants (MAPs) is an abundant and renewable resource, but proper recycling is necessary to prevent negative environmental impacts from improper disposal. This study focused on converting SW from essential oil (EO) extraction industry by citric acid-catalyzed hydrothermal carbonization (c-HTC) coupled with chemical activation into a carbonaceous material to remove organic pollutants. For this purpose, an I-optimal design coupled with response surface methodology (RSM) was developed to investigate the relationship between the severity factor (SF) of the c-HTC process and citric acid dose (HTCcat) on carbon retention rate (CRR) and hydrochar mass yield (MY). Under optimal conditions (5.32 and 2 g for SF and HTCcat, respectively), an optimized hydrochar (HCop) was characterized by a CRR and MY of 71.02% and 56.14%, respectively. HCop was chemically activated by KOH solution (AHCop) and characterized by a specific surface area of 989.81 m2.g−1, a pore volume of 0.583 cm3.g−1, a higher heating value (HHV) of 37.3 MJ/Kg, oxygenated surface functions such as –OH, –COOH, C-O and a methylene blue (MB) removal rate of 90.71%. In addition, modelling of the adsorption isotherms found that the Freundlich isotherm better describes the experimental data, and the second-order model regulates the adsorption kinetics well. Furthermore, The maximum adsorption capacity of AHCop was 588.24 mg.g−1, with a separation factor of 0.625 under the operating conditions (t = 6 h, T = 25 °C, m(AHCop) = 0.2 g, [MB]0 = 300 mg.L-1, and pH = 7), indicating its potential for effectively removing organic pollutants. Together, these results provide crucial information on using c-HTC to convert waste biomass into functional carbon materials to remove organic pollutants efficiently. Therefore, several studies must be conducted out to discover other application fields of this material

Comparative Study on the Total Phenolics, Total Flavonoids, and Biological Activities of <i>Papaver rhoeas</i> L. Extracts from Different Geographical Regions of Morocco

In this research, a comparative analysis was carried out to characterize the content of phenolics and biological activities of the whole plant of Papaver rhoeas L. (P. rhoeas) from different geographical regions of Morocco, as well as to determine the synergistic antimicrobial and antioxidant effects of all parts of P. rhoeas. The determination of total polyphenol content (TPC), total flavonoid content (TFC), and total anthocyanin content (TA) in extracts of whole plants of P. rhoeas from three different geographical regions: Taounate (P1E), Fez (P2E), and Sefrou (P3E) were estimated by the Folin–Ciocalteu reaction, the aluminum trichloride method and the differential pH absorption technique, respectively. Two tests were used to evaluate the antioxidant power of our samples: the DPPH test and the TAC test. Using two methods, disk diffusion and microdilution, antimicrobial activity was studied against four pathogenic bacteria and one yeast. The results of TPC, TFC, and TA show that the P3E sample is the richest in polyphenols, flavonoids, and anthocyanins, with values 37.33 ± 1.307 mg GAE/g, 4.72 ± 0.346 QE/g, and 1.77 ± 0.026 CGE/g, respectively. In addition, P3E showed the best antioxidant activity with an IC50 = 0.27 ± 0.001 mg/mL and TAC = 9.99 ± 0.768 mg AAE/g, respectively. The results of antimicrobial activity showed significant activity on almost all the tested strains. The lowest MIC was recorded for P3E against E. coli ATCC 25922 and E. coli CIP 53126 strains at 0.78 and 0.78 mg/mL, respectively. These results show that the geographical region can influence the plant’s phytochemistry and then these biological activities

Decolorization and Degradation of Methyl Orange Azo Dye in Aqueous Solution by the Electro Fenton Process: Application of Optimization

In a batch reactor, the EF advanced oxidation decolorization of aqueous solutions of methyl orange MO, a commercial azo reactive textile dye, was investigated in the presence of two different electrodes. The evaluation included various operational variables such as the IC current intensity (60 mA, 80 mA, and 100 mA), initial concentration of pollutant MO (20 mg/L, 40 mg/L, and 60 mg/L), initial pH of solution (3, 5, and 7), temperature of solution (20 &deg;C, 30 &deg;C, and 50 &deg;C), and initial concentration of catalyst [Fe2+] (0.1 mM, 0.2 mM, and 0.3 mM) on the discoloration rate. A Box-Behnken Design of Experiment (BBD) was used to optimize the parameters that directly affect the Electro-Fenton (EF) process. Under the optimal experimental conditions such as [Fe2+] = 0.232 mM, pH = 3, IC = 80 mA, [MO] = 60 mg/L, and T = 30 &plusmn; 0.1 &deg;C, the maximum discoloration rate achieved was 94.9%. The discoloration of the aqueous MO solution during the treatment time was confirmed by analysis of the UV-visible spectrum. After a review of the literature on organic pollutant degradation, the EF system provided here is shown to be one of the best in terms of discoloration rate when compared to other AOPs

Decolorization and Degradation of Methyl Orange Azo Dye in Aqueous Solution by the Electro Fenton Process: Application of Optimization

In a batch reactor, the EF advanced oxidation decolorization of aqueous solutions of methyl orange MO, a commercial azo reactive textile dye, was investigated in the presence of two different electrodes. The evaluation included various operational variables such as the IC current intensity (60 mA, 80 mA, and 100 mA), initial concentration of pollutant MO (20 mg/L, 40 mg/L, and 60 mg/L), initial pH of solution (3, 5, and 7), temperature of solution (20 °C, 30 °C, and 50 °C), and initial concentration of catalyst [Fe2+] (0.1 mM, 0.2 mM, and 0.3 mM) on the discoloration rate. A Box-Behnken Design of Experiment (BBD) was used to optimize the parameters that directly affect the Electro-Fenton (EF) process. Under the optimal experimental conditions such as [Fe2+] = 0.232 mM, pH = 3, IC = 80 mA, [MO] = 60 mg/L, and T = 30 ± 0.1 °C, the maximum discoloration rate achieved was 94.9%. The discoloration of the aqueous MO solution during the treatment time was confirmed by analysis of the UV-visible spectrum. After a review of the literature on organic pollutant degradation, the EF system provided here is shown to be one of the best in terms of discoloration rate when compared to other AOPs

Nitrogen and phosphorus co-doped carbocatalyst for efficient organic pollutant removal through persulfate-based advanced oxidation processes

Carbocatalysts doped with heteroatoms such as nitrogen or sulphur have been reported to be useful in persulfate-based advanced oxidation processes for organic pollutant removal. However, there is limited research on the effect of doping with phosphorus atoms on degradation performance. In this work, a new nitrogen and phosphorus-doped carbocatalyst (N, P-HC) was designed using hydrothermal carbonization followed by pyrolysis at 700 °C, with olive pomace as a carbon source, to degrade organic pollutants in the presence of peroxydisulfate (PDS). Experimental results showed that N, P-HC, with its large specific surface area (871.73 m2.g−1), high content of N-pyridinic and N-pyrrolic groups, and the presence of P-O-C and O-P-C bonds, exhibited high degradation performance (98% degradation of Rhodamine B (RhB) in 40 min, with an apparent rate constant (kapp) of 0.055 min−1 and an excellent turnover frequency (TOF) of 0.275 min−1). Quenching study and EPR analysis revealed that singlet oxygen generation (1O2) and direct electron transfer were the main reaction pathways for the non-radical pathway in the degradation of RhB. The improved catalytic efficiency in the N, P-HC/PDS/RhB system can be attributed to the synergistic effect between N and P atoms in the graphitic structure of the carbocatalyst, its high surface area, and the presence of oxygenated functional groups on the surface of the N, P-HC. The used N, P-HC carbocatalyst can also be efficiently recovered by heat treatment at 500 °C. Overall, this study presents a simple and environmentally friendly method for synthesizing a high-performance N, P co-doped olive pomace-based carbocatalyst for water decontamination through PS-AOPs processes