Ex Situ LIBS Analysis of WEST Divertor Wall Tiles after C3 Campaign

Fuel retention monitoring in tokamak walls requires the development of remote composition analysis methods such as laser-induced breakdown spectroscopy (LIBS). The present study investigates the feasibility of the LIBS method to analyse the composition and fuel retention in three samples from WEST divertor erosion marker tiles after the experimental campaign C3. The investigated samples originated from tile regions outside of strong erosion and deposition regions, where the variation of thin deposit layers is relatively small and facilitates cross-comparison between different analysis methods. The depth profiles of main constituents W, Mo and C were consistent with depth profiles determined by other composition analysis methods, such as glow-discharge optical emission spectroscopy (GDOES) and secondary ion mass spectrometry (SIMS). The average LIBS depth resolution determined from depth profiles was 100 nm/shot. The averaging of the spectra collected from multiple spots of a same sample allowed us to improve the signal-to-noise ratio, investigate the presence of fuel D and trace impurities such as O and B. In the investigated tile regions with negligible erosion and deposition, these impurities were clearly detectable during the first laser shot, while the signal decreased to noise level after a few subsequent laser shots at the same spot. LIBS investigation of samples originating from the deposition regions of tiles may further clarify LIBS’ ability to investigate trace impurities

Gross and net erosion balance of plasma-facing materials in full-W tokamaks

Gross and net erosion of tungsten (W) and other plasma-facing materials in the divertor region have been investigated in deuterium (D) and helium (He) plasmas during dedicated experiments in L- and H-mode on ASDEX Upgrade and after full-length experimental campaigns on the WEST tokamak. Net erosion was determined via post-exposure analyses of plasma-exposed samples and full-size wall components, and we conclude that the same approach is applicable to gross erosion if marker structures with sub-millimeter dimensions are used to eliminate the contribution of prompt re-deposition. In H-mode plasmas, gross erosion during ELMs may exceed the situation in inter-ELM conditions by 1-2 orders of magnitude while net erosion is typically higher by a factor of 2-3. The largest impact on net erosion is attributed to the electron temperature while the role of the impurity mixtures is weaker, even though both on ASDEX Upgrade and WEST significant amounts of impurities are present in the edge plasmas. Impurities, on the other hand, will lead to the formation of thick co-deposited layers. We have also noted that with increasing surface roughness, net erosion is strongly suppressed and the growth of co-deposited layers is enhanced. In He plasmas, gross erosion is increased compared to D due to the higher mass and charge states of the plasma particles, resulting from larger energies due to sheath acceleration, but strong impurity fluxes can result in apparent net deposition in the divertor. Our results from ASDEX Upgrade and WEST are comparable and indicate typical net-erosion rates of 0.1-0.4 nm s(-1), excluding the immediate vicinity of the strike-point regions.Peer reviewe

Ex Situ LIBS Analysis of WEST Divertor Wall Tiles after C3 Campaign

Fuel retention monitoring in tokamak walls requires the development of remote composition analysis methods such as laser-induced breakdown spectroscopy (LIBS). The present study investigates the feasibility of the LIBS method to analyse the composition and fuel retention in three samples from WEST divertor erosion marker tiles after the experimental campaign C3. The investigated samples originated from tile regions outside of strong erosion and deposition regions, where the variation of thin deposit layers is relatively small and facilitates cross-comparison between different analysis methods. The depth profiles of main constituents W, Mo and C were consistent with depth profiles determined by other composition analysis methods, such as glow-discharge optical emission spectroscopy (GDOES) and secondary ion mass spectrometry (SIMS). The average LIBS depth resolution determined from depth profiles was 100 nm/shot. The averaging of the spectra collected from multiple spots of a same sample allowed us to improve the signal-to-noise ratio, investigate the presence of fuel D and trace impurities such as O and B. In the investigated tile regions with negligible erosion and deposition, these impurities were clearly detectable during the first laser shot, while the signal decreased to noise level after a few subsequent laser shots at the same spot. LIBS investigation of samples originating from the deposition regions of tiles may further clarify LIBS’ ability to investigate trace impurities

Latest results of EUROfusion Plasma-Facing Components research in the areas of power loading, material erosion and fuel retention

The interaction between the edge-plasma in a fusion reactor and the surrounding first-wall components is one of the main issues for the realisation of fusion energy power plants. The EUROfusion Work Package on Plasma-Facing Components addresses the key areas of plasma-surface interaction in view of ITER and DEMO operation, which are mostly related to material erosion, surface damage and fuel retention. These aspects are both investigated experimentally (in tokamaks, linear plasma devices and lab experiments) and by modelling. Here, selective results regarding the main research topics are presented: In the area of tungsten (W) surface modifications, the interplay between W fuzz formation and W fuzz erosion depends strongly on the local plasma and surface conditions, as demonstrated by tokamak experiments. Complementary, experimental findings on the dependence of erosion on the surface structure in lab-scale experiments have led to the successful implementation of surface structure effects in numerical modelling. The qualification of ITER-like monoblocks at high fluences of up to 1031 D/m² in linear plasma facilities has shown no visible damages at cold plasma conditions. However, experiments with simultaneous plasma and pulsed heat loading (edge-localized modes simulations) show that synergistic effects can lower the W damage thresholds. Additionally, fuel retention studies show that nitrogen as a plasma impurity increases the fuel retention in W, and that deuterium implanted in the surface of W is capable of stabilizing displacement damages caused by neutron damage. Finally, the implications of these results on ITER and DEMO operation are discussed and an outlook on follow-up experiments is given: The results indicate that there are possible impacts on the ITER divertor lifetime and tritium removal. Other areas like the divertor shaping and the erosion need additional investigations in the future to quantify the impact on ITER and DEMO operation

Gross and net erosion balance of plasma-facing materials in full-W tokamaks

| openaire: EC/H2020/633053/EU//EUROfusionGross and net erosion of tungsten (W) and other plasma-facing materials in the divertor region have been investigated in deuterium (D) and helium (He) plasmas during dedicated experiments in L- and H-mode on ASDEX Upgrade and after full-length experimental campaigns on the WEST tokamak. Net erosion was determined via post-exposure analyses of plasma-exposed samples and full-size wall components, and we conclude that the same approach is applicable to gross erosion if marker structures with sub-millimeter dimensions are used to eliminate the contribution of prompt re-deposition. In H-mode plasmas, gross erosion during ELMs may exceed the situation in inter-ELM conditions by 1-2 orders of magnitude while net erosion is typically higher by a factor of 2-3. The largest impact on net erosion is attributed to the electron temperature while the role of the impurity mixtures is weaker, even though both on ASDEX Upgrade and WEST significant amounts of impurities are present in the edge plasmas. Impurities, on the other hand, will lead to the formation of thick co-deposited layers. We have also noted that with increasing surface roughness, net erosion is strongly suppressed and the growth of co-deposited layers is enhanced. In He plasmas, gross erosion is increased compared to D due to the higher mass and charge states of the plasma particles, resulting from larger energies due to sheath acceleration, but strong impurity fluxes can result in apparent net deposition in the divertor. Our results from ASDEX Upgrade and WEST are comparable and indicate typical net-erosion rates of 0.1-0.4 nm s(-1), excluding the immediate vicinity of the strike-point regions.Peer reviewe