Impact of Electrostatic Forces in Contact Mode Scanning Force Microscopy

In this $\ll$ contribution we address the question to what extent surface charges affect contact-mode scanning force microscopy measurements. % We therefore designed samples where we could generate localized electric field distributions near the surface as and when required. % We performed a series of experiments where we varied the load of the tip, the stiffness of the cantilever and the hardness of the sample surface. % It turned out that only for soft cantilevers could an electrostatic interaction between tip and surface charges be detected, irrespective of the surface properties, i.\,e. basically regardless its hardness. % We explain these results through a model based on the alteration of the tip-sample potential by the additional electric field between charged tip and surface charges

Imminent Phenomenology of a Minimal Gauge-Mediated Model

We calculate the inclusive branching ratio for B--> X_s gamma, the inclusive branching ratios and asymmetries for B--> X_s l+ l- and the anomalous magnetic moment g-2 of the muon, within a minimal gauge-mediated SUSY-breaking model which naturally generates a large ratio tan(beta) of Higgs field vacuum expectation values. These predictions are highly correlated with each other, depending on only two fundamental parameters: the superpartner mass scale and the logarithm of a common messenger mass. The predictions for B--> X_s gamma decay and g-2 are in somewhat better agreement with current experiments than the standard model, but a much sharper comparison will soon be possible using new measurements now in progress or under analysis. Moreover we predict large deviations in B--> X_s e+ e- and B--> X_s mu+ mu- asymmetries, and somewhat smaller ones in B--> X_s e+ e- and B--> X_s tau+ tau- branching ratios, which will be detectable in hadronic colliders

Controlling the quality factor of a tuning-fork resonance between 9 K and 300 K for scanning-probe microscopy

We study the dynamic response of a mechanical quartz tuning fork in the temperature range from 9 K to 300 K. Since the quality factor Q of the resonance strongly depends on temperature, we implement a procedure to control the quality factor of the resonance. We show that we are able to dynamically change the quality factor and keep it constant over the whole temperature range. This procedure is suitable for applications in scanning probe microscopy.Comment: 5 pages, 6 figure

Nanoscale piezoelectric response across a single antiparallel ferroelectric domain wall

Surprising asymmetry in the local electromechanical response across a single antiparallel ferroelectric domain wall is reported. Piezoelectric force microscopy is used to investigate both the in-plane and out-of- plane electromechanical signals around domain walls in congruent and near-stoichiometric lithium niobate. The observed asymmetry is shown to have a strong correlation to crystal stoichiometry, suggesting defect-domain wall interactions. A defect-dipole model is proposed. Finite element method is used to simulate the electromechanical processes at the wall and reconstruct the images. For the near-stoichiometric composition, good agreement is found in both form and magnitude. Some discrepancy remains between the experimental and modeling widths of the imaged effects across a wall. This is analyzed from the perspective of possible electrostatic contributions to the imaging process, as well as local changes in the material properties in the vicinity of the wall

Local probing of ionic diffusion by electrochemical strain microscopy: spatial resolution and signal formation mechanisms

Electrochemical insertion-deintercalation reactions are typically associated with significant change of molar volume of the host compound. This strong coupling between ionic currents and strains underpins image formation mechanisms in electrochemical strain microscopy (ESM), and allows exploring the tip-induced electrochemical processes locally. Here we analyze the signal formation mechanism in ESM, and develop the analytical description of operation in frequency and time domains. The ESM spectroscopic modes are compared to classical electrochemical methods including potentiostatic and galvanostatic intermittent titration (PITT and GITT), and electrochemical impedance spectroscopy (EIS). This analysis illustrates the feasibility of spatially resolved studies of Li-ion dynamics on the sub-10 nanometer level using electromechanical detection.Comment: 49 pages, 17 figures, 4 tables, 3 appendices, to be submitted to J. Appl. Phys

Dynamic Behavior in Piezoresponse Force Microscopy

Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises contributions from local electrostatic forces acting on the tip, distributed forces acting on the cantilever, and three components of the electromechanical response vector. These interactions result in the bending and torsion of the cantilever, detected as vertical and lateral PFM signals. The relative magnitudes of these contributions depend on geometric parameters of the system, the stiffness and frictional forces of tip-surface junction, and operation frequencies. The dynamic signal formation mechanism in PFM is analyzed and conditions for optimal PFM imaging are formulated. The experimental approach for probing cantilever dynamics using frequency-bias spectroscopy and deconvolution of electromechanical and electrostatic contrast is implemented.Comment: 65 pages, 15 figures, high quality version available upon reques

Robust plasmon waveguides in strongly-interacting nanowire arrays

Arrays of parallel metallic nanowires are shown to provide a tunable, robust, and versatile platform for plasmon interconnects, including high-curvature turns with minimum signal loss. The proposed guiding mechanism relies on gap plasmons existing in the region between adjacent nanowires of dimers and multi-wire arrays. We focus on square and circular silver nanowires in silica, for which excellent agreement between both boundary element method and multiple multipolar expansion calculations is obtained. Our work provides the tools for designing plasmon-based interconnects and achieving high degree of integration with minimum cross talk between adjacent plasmon guides.Comment: 4 pages, 5 figure

Facing erythrocytosis: Results of an international physician survey.

We observed a good agreement among hematologists regarding the diagnostic procedures and a widespread awareness regarding the importance of the new 2016 WHO criteria and bone marrow his-tology. On the other side, we observed a marked heterogeneity in treatment practice, regarding both the Hct threshold and the use of anti-platelet agents

Centrifugal separation and equilibration dynamics in an electron-antiproton plasma

Charges in cold, multiple-species, non-neutral plasmas separate radially by mass, forming centrifugally-separated states. Here, we report the first detailed measurements of such states in an electron-antiproton plasma, and the first observations of the separation dynamics in any centrifugally-separated system. While the observed equilibrium states are expected and in agreement with theory, the equilibration time is approximately constant over a wide range of parameters, a surprising and as yet unexplained result. Electron-antiproton plasmas play a crucial role in antihydrogen trapping experiments