Исследование влияния температуры на процесс восстановления ацетилдифенила изопропилатом алюминия

We present a compact module, emitting nearly diffraction limited green laser light at 531 nm at an average output power of more than 500 mW. As pump source for the second harmonic generation a DBR tapered laser with a total length of 6 mm was used. The RW section had a length of 2 mm including a 1 mm long passive DBR section. The devices were mounted p-side up on a copper block. For this mounting scheme, the device reaches up to 7 W maximal output power. At the power level of about 3.8 W used in the presented experiment, a wavelength of 1062.6 nm with a line-width below 0.02 nm (FWHM) was determined. More than 80% of the emitted power is originated within the central lobe of the beam waist profile illustrating the nearly diffraction limited beam quality. Using a 30mm long MgO-doped periodically poled LiNbO3 bulk crystal, the second harmonic wave is generated in a single-pass setup. Due to precise alignment and beam shaping based on the results of numerical simulations and a properly temperature control of the PPLN crystal, a maximum optical conversion efficiency of more than 14% (3.7%/W) was achieved. The fluctuation of the output power is far below 1%