Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres

Takizawa R., Sakagami H., Nagatomo H., et al. Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres. High Energy Density Physics 52, 101124 (2024); https://doi.org/10.1016/j.hedp.2024.101124.In inertial confinement fusion using central ignition, the ignition hot spot is generated through self-heating during fuel compression. In contrast, fast ignition creates the hot spot through external heating. This difference allows the fast ignition approach to use a solid sphere as the fusion fuel shape. The implosion of a solid sphere is one form of laser-direct-drive slow implosion. Solid sphere fuel exhibits tolerance to hydrodynamic instability and can be mass-produced relatively easily, offering significant advantages for developing inertial fusion energy. Achieving high fuel peak and areal densities of with a solid sphere requires quasi-isentropic compression, which involves multiple shock waves. Our results show the critical role of uniform laser irradiation in initiating weak shock waves in the early phase, which is essential for forming a uniform and dense fuel core with solid spheres. Furthermore, dynamically adjusting the laser spot diameter could be crucial in optimizing the effectiveness of laser-direct-drive and fast ignition techniques when using solid sphere fuel

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University.Ikeda T., Kaneyasu Y., Hosokawa H., et al. Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments. Nuclear Fusion 63, 016010 (2023); https://doi.org/10.1088/1741-4326/aca2ba

Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.Kojima S., Abe Y., Miura E., et al. Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system. Optics Express 30, 43491 (2022); https://doi.org/10.1364/oe.475945

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

先端科学・社会共創推進機構In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University

Preparation and Characterization of Graphene from Refined Benzene Extracted from Low-Rank Coal: Based on the CVD Technology

Industrial preparation of graphene has been a research hotspot in recent years. Finding an economical and practical carbon source and reducing the cost of production and instrument is significant in industrial graphene production. Coal is a common carbon source. Efficient improvement and utilization in the cleaning of coal has recently been a popular research area. In this study, we developed a set of graphene preparation methods based on Anhui Huainan’s low-rank gas coal (HNGC). Using self-built experimental equipment, benzene precursor was prepared from HNGC and used as carbon source to realize graphene growth. The quality of the graphene was characterized by a high-resolution microscope and Raman spectrometer. This study provides a new idea and method for the preparation of low-rank coal-based graphene