1,136 research outputs found

    Microwave-induced nonequilibrium temperature in a suspended carbon nanotube

    Full text link
    Antenna-coupled suspended single carbon nanotubes exposed to 108 GHz microwave radiation are shown to be selectively heated with respect to their metal contacts. This leads to an increase in the conductance as well as to the development of a power-dependent DC voltage. The increased conductance stems from the temperature dependence of tunneling into a one-dimensional electron system. The DC voltage is interpreted as a thermovoltage, due to the increased temperature of the electron liquid compared to the equilibrium temperature in the leads

    Uniform non-stoichiometric titanium nitride thin films for improved kinetic inductance detector array

    Full text link
    We describe the fabrication of homogeneous sub-stoichiometric titanium nitride films for microwave kinetic inductance detector (mKID) arrays. Using a 6 inch sputtering target and a homogeneous nitrogen inlet, the variation of the critical temperature over a 2 inch wafer was reduced to <25 %. Measurements of a 132-pixel mKID array from these films reveal a sensitivity of 16 kHz/pW in the 100 GHz band, comparable to the best aluminium mKIDs. We measured a noise equivalent power of NEP = 3.6e-15 W/Hz^(1/2). Finally, we describe possible routes to further improve the performance of these TiN mKID arrays.Comment: 7 pages, 4 figures, submitted to Journal of low temperature physics, Proceedings of LTD-1

    Probing thermalization and dynamics of high-energy quasiparticles in a superconducting nanowire by scanning critical current microscopy

    Full text link
    Besides its fundamental interest, understanding the dynamics of pair breaking in superconducting nanostructures is a central issue to optimize the performances of superconducting devices such as qubits or photon detectors. However, despite substantial research efforts, these dynamics are still not well understood as this requires experiments in which quasiparticles are injected in a controlled fashion. Until now, such experiments have employed solid-state tunnel junctions with a fixed tunnel barrier. Here we use instead a cryogenic scanning tunnelling microscope to tune independently the energy and the rate of quasiparticle injection through, respectively, the bias voltage and the tunnelling current. For high energy quasiparticles, we observe the reduction of the critical current of a nanowire and show it is mainly controlled by the injected power and, marginally, by the injection rate. Our results prove a thermal mechanism for the reduction of the critical current and unveil the rapid dynamics of the generated hot spot.Comment: 25 pages, 14 figure

    One- and two-photon spectroscopy of a flux qubit coupled to a microscopic defect

    Full text link
    We observed the dynamics of a superconducting flux qubit coupled to an extrinsic quantum system (EQS). The presence of the EQS is revealed by an anticrossing in the spectroscopy of the qubit. The excitation of a two-photon transition to the third excited state of the qubit-EQS system allows us to extract detailed information about the energy level structure and the coupling of the EQS. We deduce that the EQS is a two-level system, with a transverse coupling to the qubit. The transition frequency and the coupling of the EQS changed during experiments, which supports the idea that the EQS is a two-level system of microscopic origin.Comment: accepted in Physical Review

    Efficient and robust fiber coupling of superconducting single photon detectors

    Full text link
    We applied a recently developed fiber coupling technique to superconducting single photon detectors (SSPDs). As the detector area of SSPDs has to be kept as small as possible, coupling to an optical fiber has been either inefficient or unreliable. Etching through the silicon substrate allows fabrication of a circularly shaped chip which self aligns to the core of a ferrule terminated fiber in a fiber sleeve. In situ alignment at cryogenic temperatures is unnecessary and no thermal stress during cooldown, causing misalignment, is induced. We measured the quantum efficiency of these devices with an attenuated tunable broadband source. The combination of a lithographically defined chip and high precision standard telecommunication components yields near unity coupling efficiency and a system detection efficiency of 34% at a wavelength of 1200 nm. This quantum efficiency measurement is confirmed by an absolute efficiency measurement using correlated photon pairs (with λ\lambda = 1064 nm) produced by spontaneous parametric down-conversion. The efficiency obtained via this method agrees well with the efficiency measured with the attenuated tunable broadband source

    Critical-Current Reduction in Thin Superconducting Wires Due to Current Crowding

    Full text link
    We demonstrate experimentally that the critical current in superconducting NbTiN wires is dependent on their geometrical shape, due to current-crowding effects. Geometric patterns such as 90 degree corners and sudden expansions of wire width are shown to result in the reduction of critical currents. The results are relevant for single-photon detectors as well as parametric amplifiers

    Anomalous response of superconducting titanium nitride resonators to terahertz radiation

    Get PDF
    We present an experimental study of KIDs fabricated of atomic layer deposited TiN films, and characterized at radiation frequencies of 350350~GHz. The responsivity to radiation is measured and found to increase with increasing radiation powers, opposite to what is expected from theory and observed for hybrid niobium titanium nitride / aluminium (NbTiN/Al) and all-aluminium (all-Al) KIDs. The noise is found to be independent of the level of the radiation power. The noise equivalent power (NEP) improves with higher radiation powers, also opposite to what is observed and well understood for hybrid NbTiN/Al and all-Al KIDs. We suggest that an inhomogeneous state of these disordered superconductors should be used to explain these observations

    Low loss, high contrast optical waveguides based on CMOS compatible LPCVD processing

    Get PDF
    A new class of integrated optical waveguide structures is presented, based on low cost CMOS compatible LPCVD processing. This technology allows for medium and high index contrast waveguides with very low channel attenuation. The geometry is basically formed by a rectangular cross-section silicon nitride (Si3N4)(Si_{3}N_{4}) filled with and encapsulated by silicon dioxide (SiO2)(SiO_{2}). The birefringence and minimal bend radius of the waveguide is completely controlled by the geometry of the waveguide layer structures. Experiments on typical geometries will be presented, showing excellent characteristics (channel attenuation ≀0.06 dB/cm, IL ≀0.6 dB, PDL ≀0.2 dB, Bg «1 x 10−310^{-3}, bend radius ≀500 ÎŒm)
    • 

    corecore