7,397 research outputs found
A logarithmic-depth quantum carry-lookahead adder
We present an efficient addition circuit, borrowing techniques from the
classical carry-lookahead arithmetic circuit. Our quantum carry-lookahead
(QCLA) adder accepts two n-bit numbers and adds them in O(log n) depth using
O(n) ancillary qubits. We present both in-place and out-of-place versions, as
well as versions that add modulo 2^n and modulo 2^n - 1.
Previously, the linear-depth ripple-carry addition circuit has been the
method of choice. Our work reduces the cost of addition dramatically with only
a slight increase in the number of required qubits. The QCLA adder can be used
within current modular multiplication circuits to reduce substantially the
run-time of Shor's algorithm.Comment: 21 pages, 4 color figure
Bioinspired electrohydrodynamic ceramic patterning of curved metallic substrates
Template-assisted electrohydrodynamic atomisation (TAEA) has been used for the first time to pattern curved metallic surfaces. Parallel lines of ceramic titania (TiO2) were produced on titanium substrates, convex and concave with diameters of ~25 mm, at the ambient temperature. Optimal results were obtained with 4 wt% TiO2 in ethanol suspension deposited over 300 s during stable cone-jetting at 20 µl/min, 10kV and collection distance 80 mm. A high degree of control over pattern line width, interline spacing and thickness were achieved. Nanoindentation load-displacement curves were continuous for the full loading and unloading cycle, indicating good adhesion between pattern and substrate. At a loading rate of 1 μN/s and a hold time of 1 s, pattern hardness decreased as load increased up to 7 μN and remained at 0·1 GPa up to higher loads. Elastic modulus behaved similarly, and both were not sensitive to loading rate. The effect of heat treatment to further consolidate the patterned deposits was also investigated. Hardness of the patterns was not markedly affected by heating. This work shows that TAEA is highly controllable and compatible on a range of substrate geometries. Extending TAEA capabilities from flat to curved surfaces, enabling the bioactive patterning of different surface geometries, takes this technology closer to orthopaedic engineering applications
Modelling tidal energy extraction in a depth-averaged coastal domain
An extension of actuator disc theory is used to describe the properties of a tidal energy device, or row of tidal energy devices, within a depth-averaged numerical model. This approach allows a direct link to be made between an actual tidal device and its equivalent momentum sink in a depth-averaged domain. Extended actuator disc theory also leads to a measure of efficiency for an energy device in a tidal stream of finite Froude number, where efficiency is defined as the ratio of power extracted by one or more tidal devices to the total power removed from the tidal stream. To demonstrate the use of actuator disc theory in a depth-averaged model, tidal flow in a simple channel is approximated using the shallow water equations and the results are compared with the published analytical solutions. © 2010 © The Institution of Engineering and Technology
Determining the Structure of Supersymmetry-Breaking with Renormalization Group Invariants
If collider experiments demonstrate that the Minimal Supersymmetric Standard
Model (MSSM) is a good description of nature at the weak scale, the
experimental priority will be the precise determination of superpartner masses.
These masses are governed by the weak scale values of the soft supersymmetry
(SUSY)-breaking parameters, which are in turn highly dependent on the
SUSY-breaking scheme present at high scales. It is therefore of great interest
to find patterns in the soft parameters that can distinguish different high
scale SUSY-breaking structures, identify the scale at which the breaking is
communicated to the visible sector, and determine the soft breaking parameters
at that scale. In this work, we demonstrate that 1-loop Renormalization
Group~(RG) invariant quantities present in the MSSM may be used to answer each
of these questions. We apply our method first to generic flavor-blind models of
SUSY-breaking, and then examine in detail the subset of these models described
by General Gauge Mediation and the constrained MSSM with non-universal Higgs
masses. As RG invariance generally does not hold beyond leading-log order, we
investigate the magnitude and direction of the 2-loop corrections. We find that
with superpartners at the TeV scale, these 2-loop effects are either
negligible, or they are of the order of optimistic experimental uncertainties
and have definite signs, which allows them to be easily accounted for in the
overall uncertainty.Comment: v2 -- references added, version to be published in PRD; 40 page
SUSY-Breaking Parameters from RG Invariants at the LHC
We study Renormalization Group invariant (RGI) quantities in the Minimal
Supersymmetric Standard Model and show that they are a powerful and simple
instrument for testing high scale models of supersymmetry (SUSY)-breaking. For
illustration, we analyze the frameworks of minimal and general gauge mediated
(MGM and GGM) SUSY-breaking, with additional arbitrary soft Higgs mass
parameters at the messenger scale. We show that if a gaugino and two first
generation sfermion soft masses are determined at the LHC, the RGIs lead to MGM
sum rules that yield accurate predictions for the other gaugino and first
generation soft masses. RGIs can also be used to reconstruct the fundamental
MGM parameters (including the messenger scale), calculate the hypercharge
D-term, and find relationships among the third generation and Higgs soft
masses. We then study the extent to which measurements of the full first
generation spectrum at the LHC may distinguish different SUSY-breaking
scenarios. In the case of MGM, although most deviations violate the sum rules
by more than estimated experimental errors, we find a 1-parameter family of GGM
models that satisfy the constraints and produce the same first generation
spectrum. The GGM-MGM degeneracy is lifted by differences in the third
generation masses and the messenger scales.Comment: (v1) 30 pages; (v2) mislabeling in figs 2 and 3 corrected, version
accepted for publication in Phys. Rev.
An empirical study on the preferred size of the participant information sheet in research
Background: Informed consent is a requirement for all research. It is not, however, clear how much information is sufficient to make an informed decision about participation in research. Information on an online questionnaire about childhood development was provided through an unfolding electronic participant sheet in three levels of information. \ud
Methods: 552 participants, who completed the web-based survey, accessed and spent time reading the participant information sheet (PIS) between July 2008 and November 2009. The information behaviour of the participants was investigated. The first level contained less information than might be found on a standard PIS, the second level corresponded to a standard PIS, and the third contained more information than on a standard PIS. The actual time spent on reading the information provided in three incremental levels and the participants' evaluation of the information were calculated. \ud
Results: 77% of the participants chose to access the first level of information, whereas 12% accessed the first two levels, 6% accessed all three levels of information and 23% participated without accessing information. The most accessed levels of information were those that corresponded to the average reading times. \ud
Conclusion: The brief information provided in the first level was sufficient for participants to make informed decisions, while a sizeable minority of the participants chose not to access any information at all. This study adds to the debate about how much information is required to make a decision about participation in research and the results may help inform the future development of information sheets by providing data on participants' actual needs when deciding about questionnaire surveys.\u
Decuplet Baryon Structure from Lattice QCD
The electromagnetic properties of the SU(3)-flavor baryon decuplet are
examined within a lattice simulation of quenched QCD. Electric charge radii,
magnetic moments, and magnetic radii are extracted from the E0 and M1 form
factors. Preliminary results for the E2 and M3 moments are presented giving the
first model independent insight to the shape of the quark distribution in the
baryon ground state. As in our octet baryon analysis, the lattice results give
evidence of spin-dependent forces and mass effects in the electromagnetic
properties. The quark charge distribution radii indicate these effects act in
opposing directions. Some baryon dependence of the effective quark magnetic
moments is seen. However, this dependence in decuplet baryons is more subtle
than that for octet baryons. Of particular interest are the lattice predictions
for the magnetic moments of and for which new recent
experimental measurements are available. The lattice prediction of the
ratio appears larger than the experimental ratio, while the
lattice prediction for the magnetic moment ratio is in good
agreement with the experimental ratio.Comment: RevTeX manuscript, 34 pages plus 21 figures (available upon request
Using Rheo-Small-Angle Neutron Scattering to Understand How Functionalised Dipeptides Form Gels
We explore the use of rheo-small-angle neutron scattering as a method to collect structural information from neutron scattering simultaneously with rheology to understand how low-molecular-weight hydrogels form and behave under shear. We examine three different gelling hydrogel systems to assess what structures are formed and how these influence the rheology. Furthermore, we probe what is happening to the network during syneresis and why the gels do not recover after an applied strain. All this information is vital when considering gels for applications such as 3D-printing and injection
- …