28 research outputs found
Surface Deposition and Imaging of Large Ag Clusters Formed in He Droplets
The utility of a continuous beam of He droplets for the assembly and surface
deposition of Ag clusters, ~ 300 - 6 000, is studied with transmission
electron microscopy. Images of the clusters on amorphous carbon substrates
obtained at short deposition times have provided for a measure of the size
distribution of the metal clusters. The average sizes of the deposited clusters
are in good agreement with an energy balance based estimate of Ag cluster
growth in He droplets. Measurements of the deposition rate indicate that upon
impact with the surface the He-embedded cluster is attached with high
probability. The stability of the deposited clusters on the substrate is
discussed.Comment: 24 pages, 5 figure
First bromine doped cryogenic implosion at the National Ignition Facility
We report on the first experiment dedicated to the study of nuclear reactions
on dopants in a cryogenic capsule at the National Ignition Facility (NIF). This
was accomplished using bromine doping in the inner layers of the CH ablator of
a capsule identical to that used in the NIF shot N140520. The capsule was doped
with 310 bromine atoms. The doped capsule shot, N170730,
resulted in a DT yield that was 2.6 times lower than the undoped equivalent.
The Radiochemical Analysis of Gaseous Samples (RAGS) system was used to collect
and detect Kr atoms resulting from energetic deuteron and proton ion
reactions on Br. RAGS was also used to detect N produced
dominantly by knock-on deuteron reactions on the C in the ablator.
High-energy reaction-in-flight neutrons were detected via the
Bi(n,4n)Bi reaction, using bismuth activation foils located 50
cm outside of the target capsule. The robustness of the RAGS signals suggest
that the use of nuclear reactions on dopants as diagnostics is quite feasible
Improved Performance of High Areal Density Indirect Drive Implosions at the National Ignition Facility using a Four-Shock Adiabat Shaped Drive
Hydrodynamic instabilities can cause capsule defects and other perturbations to grow and degrade implosion performance in ignition experiments at the National Ignition Facility (NIF). Here, we show the first experimental demonstration that a strong unsupported first shock in indirect drive implosions at the NIF reduces ablation front instability growth leading to a 3 to 10 times higher yield with fuel ρR > 1 g/cm[superscript 2]. This work shows the importance of ablation front instability growth during the National Ignition Campaign and may provide a path to improved performance at the high compression necessary for ignition
Demonstration of High Performance in Layered Deuterium-Tritium Capsule Implosions in Uranium Hohlraums at the National Ignition Facility
We report on the first layered deuterium-tritium (DT) capsule implosions indirectly driven by a “high-foot” laser pulse that were fielded in depleted uranium hohlraums at the National Ignition Facility. Recently, high-foot implosions have demonstrated improved resistance to ablation-front Rayleigh-Taylor instability induced mixing of ablator material into the DT hot spot [Hurricane et al., Nature (London) 506, 343 (2014)]. Uranium hohlraums provide a higher albedo and thus an increased drive equivalent to an additional 25 TW laser power at the peak of the drive compared to standard gold hohlraums leading to higher implosion velocity. Additionally, we observe an improved hot-spot shape closer to round which indicates enhanced drive from the waist. In contrast to findings in the National Ignition Campaign, now all of our highest performing experiments have been done in uranium hohlraums and achieved total yields approaching 10[superscript 16] neutrons where more than 50% of the yield was due to additional heating of alpha particles stopping in the DT fuel.United States. Dept. of Energy (Lawrence Livermore National Laboratory Contract DE-AC52-07NA27344
Recommended from our members
Thomson Scattering at FLASH - Status Report
The basic idea is to implement Thomson scattering with free electron laser (FEL) radiation at near-solid density plasmas as a diagnostic method which allows the determination of plasma temperatures and densities in the warm dense matter (WDM) regime (free electron density of n{sub e} = 10{sup 21}-10{sup 26} cm{sup -3} with temperatures of several eV). The WDM regime [1] at near-solid density (n{sub e} = 10{sup 21}-10{sup 22} cm{sup -3}) is of special interest because, it is where the transition from an ideal plasma to a degenerate, strongly coupled plasma occurs. A systematic understanding of this largely unknown WDM domain is crucial for the modeling and understanding of contemporary plasma experiments, like laser shock-wave or Z-pinch experiments as well as for inertial confinement fusion (ICF) experiments as the plasma evolution follows its path through this domain
Thin Shell, High Velocity Inertial Confinement Fusion Implosions on the National Ignition Facility
Experiments have recently been conducted at the National Ignition Facility utilizing inertial confinement fusion capsule ablators that are 175 and 165 μm in thickness, 10% and 15% thinner, respectively, than the nominal thickness capsule used throughout the high foot and most of the National Ignition Campaign. These three-shock, high-adiabat, high-foot implosions have demonstrated good performance, with higher velocity and better symmetry control at lower laser powers and energies than their nominal thickness ablator counterparts. Little to no hydrodynamic mix into the DT hot spot has been observed despite the higher velocities and reduced depth for possible instability feedthrough. Early results have shown good repeatability, with up to 1/2 the neutron yield coming from α-particle self-heating
First High-Convergence Cryogenic Implosion in a Near-Vacuum Hohlraum
Recent experiments on the National Ignition Facility [M. J. Edwards et al., Phys. Plasmas 20, 070501 (2013)] demonstrate that utilizing a near-vacuum hohlraum (low pressure gas-filled) is a viable option for high convergence cryogenic deuterium-tritium (DT) layered capsule implosions. This is made possible by using a dense ablator (high-density carbon), which shortens the drive duration needed to achieve high convergence: a measured 40% higher hohlraum efficiency than typical gas-filled hohlraums, which requires less laser energy going into the hohlraum, and an observed better symmetry control than anticipated by standard hydrodynamics simulations. The first series of near-vacuum hohlraum experiments culminated in a 6.8 ns, 1.2 MJ laser pulse driving a 2-shock, high adiabat (α ~ 3.5) cryogenic DT layered high density carbon capsule. This resulted in one of the best performances so far on the NIF relative to laser energy, with a measured primary neutron yield of 1.8×10[superscript 15] neutrons, with 20% calculated alpha heating at convergence ~27×