5,708 research outputs found
Comparison of Various Mean Field Formulations for Retrieving Refractive Indices of Aerosol Particles Containing Inclusions
Application of effective medium approximation (EMA) methods to two-component systems are presented. Systems studied are composed of water, sulfate, soot, and dust as these are commonly encountered atmospheric aerosol components. Atmospheric models often employ EMAs to include internally mixed aerosols without the computational burden of exact theory. In the current work, several types of mixing rules (Maxwell-Garnet, Bruggeman, and coherent potential approximation) have been applied to various two-component internally mixed particles at 550 nm using volume fractions of the minor component below 0.1. As expected, results show that the formulations tested produce very similar effective refractive indices indicating that electric field interactions between inclusions is negligible at the tested volume fractions. This indicates that the differences in component refractive index has only a minor effect on the validity of the EMA at the tested volume fractions. In all cases considered, the linear average of the refractive indices of the two components provides an upper limit for the EMAs
Recommended from our members
Bandwidth Borrowing Schemes for Instantaneous Video-on-Demand Systems
A controlled multicast scheme provides instantaneous service, but limited server bandwidth causes some user requests to be either delayed or rejected when insufficient free bandwidth is available. Two borrowing schemes are proposed for instantaneous video-on-demand (VOD) that reduce the user request blocking rate by borrowing bandwidth from ongoing video streams when there is insufficient free bandwidth for the server to deliver a new video stream. Both these new schemes have proved to be successful in reducing blocking rate and increasing bandwidth utilization at the expense of temporarily degrading the video quality
Recommended from our members
Analysis of fuzzy clustering and a generic fuzzy rule-based image segmentation technique
Many fuzzy clustering based techniques when applied to image segmentation do not incorporate spatial relationships of the pixels, while fuzzy rule-based image segmentation techniques are generally application dependent. Also for most of these techniques, the structure of the membership functions is predefined and parameters have to either automatically or manually derived. This paper addresses some of these issues by introducing a new generic fuzzy rule based image segmentation (GFRIS) technique, which is both application independent and can incorporate the spatial relationships of the pixels as well. A qualitative comparison is presented between the segmentation results obtained using this method and the popular fuzzy c-means (FCM) and possibilistic c-means (PCM) algorithms using an empirical discrepancy method. The results demonstrate this approach exhibits significant improvements over these popular fuzzy clustering algorithms for a wide range of differing image types
A new species of Dialeurodes Cockerell (Hemiptera: Aleyrodidae) on Schefflera Forst and Forst in Florida
Descriptions of pupal cases of Dialeurodes schefflerae, new species, as well as distribution records are presented. This species is known to occur in Florida, Hawaii and Puerto Rico appearing to feed only on species of Schefflera Forst and Forst. This restriction to plant hosts in the Asian genus Schefflera, along with its affinities with Dialeurodes agalmae Takahashi, Dialeurodes citri (Ashmead) and Dialeurodes kirkaldyi (Kotinsky), suggests it is an invasive species, probably endemic to the Asian region
A Modified Distortion Measurement Algorithm for Shape Coding
Efficient encoding of object boundaries has become increasingly prominent in areas such as content-based storage and retrieval, studio and television post-production facilities, mobile communications and other real-time multimedia applications. The way distortion between the actual and approximated shapes is measured however, has a major impact upon the quality of the shape coding algorithms. In existing shape coding methods, the distortion measure do not generate an actual distortion value, so this paper proposes a new distortion measure, called a modified distortion measure for shape coding (DMSC) which incorporates an actual perceptual distance. The performance of the Operational Rate Distortion optimal algorithm [1] incorporating DMSC has been empirically evaluated upon a number of different natural and synthetic arbitrary shapes. Both qualitative and quantitative results confirm the superior results in comparison with the ORD lgorithm for all test shapes, without any increase in computational complexity
Energy Efficient Relay-Assisted Cellular Network Model using Base Station Switching
Cellular network planning strategies have tended to focus on peak traffic scenarios rather than energy efficiency. By exploiting the dynamic nature of traffic load profiles, the prospect for greener communications in cellular access networks is evolving. For example, powering down base stations (BS) and applying cell zooming can significantly reduce energy consumption, with the overriding design priority still being to uphold a minimum quality of service (QoS). Switching off cells completely can lead to both coverage holes and performance degradation in terms of increased outage probability, greater transmit power dissipation in the up and downlinks, and complex interference management, even at low traffic loads. In this paper, a cellular network model is presented where certain BS rather than being turned off, are switched to low-powered relay stations (RS) during zero-to-medium traffic periods. Neighbouring BS still retain all the baseband signal processing and transmit signals to corresponding RS via backhaul connections, under the assumption that the RS covers the whole cell. Experimental results demonstrate the efficacy of this new BS-RS Switching technique from both an energy saving and QoS perspective, in the up and downlinks
Recommended from our members
Very low bit-rate video coding focusing on moving regions using three-tier arbitrary-shaped pattern selection algorithm
Very low bit-rate video coding using patterns to represent moving regions in macroblocks exhibits good potential for improved coding efficiency. Recently an Arbitrary Shaped Pattern Selection (ASPS) algorithm and its Extended version(EASPS) were presented, that used a dynamically extracted set of patterns, of the two different sizes, based on actual video content. These algorithms, like other pattern matching algorithms failed to capture a large number of active-region macroblocks (RMB) especially when the object moving regions is relatively larger in a video sequence. As the size of the moving object may vary, superior coding performance is achievable by using dynamically extracted patterns of a larger size. This paper, proposes a three-tier Arbitrary Shaped Pattern Selection (ASPS-3) algorithm that uses three different pattern sizes for very low bit ate coding. Experimental results show that ASPS-3 exhibits better performance compared with other pattern matching algorithms, including the low-bit rate video coding standard H.263
Recommended from our members
A content-aware quantisation mechanism for transform domain distributed video coding
The discrete cosine transform (DCT) is widely applied in modern codecs to remove spatial redundancies, with the resulting DCT coefficients being quantised to achieve compression as well as bit-rate control. In distributed video coding (DVC) architectures like DISCOVER, DCT coefficient quantisation is traditionally performed using predetermined quantisation matrices (QM), which means the compression is heavily dependent on the sequence being coded. This makes bit-rate control challenging, with the situation exacerbated in the coding of high resolution sequences due to QM scarcity and the non-uniform bit-rate gaps between them. This paper introduces a novel content-aware quantisation (CAQ) mechanism to overcome the limitations of existing quantisation methods in transform domain DVC. CAQ creates a frame-specific QM to reduce quantisation errors by analysing the distribution of DCT coefficients. In contrast to the predetermined QM that is applicable to only 4x4 block sizes, CAQ produces QM for larger block sizes to enhance compression at higher resolutions. This provides superior bit-rate control and better output quality by seeking to fully exploit the available bandwidth, which is especially beneficial in bandwidth constrained scenarios. In addition, CAQ generates superior perceptual results by innovatively applying different weightings to the DCT coefficients to reflect the human visual system. Experimental results corroborate that CAQ both quantitatively and qualitatively provides enhanced output quality in bandwidth limited scenarios, by consistently utilising over 90% of available bandwidth
Recommended from our members
A novel filter for block-based motion estimation
Noises, in the form of false motion vectors, cannot be avoided while capturing block motion vectors using block based motion estimation techniques. Similar noises are further introduced when the technique of global motion compensation is applied to obtain 'true' object motion from video sequences, where both the camera and object motions are present. We observe that the performance of the mean and the median filters in removing false motion vectors, for estimating 'true' object motion, is not satisfactory, especially when the size of the object is significantly smaller than the scene. In this paper we introduce a novel filter, named as the Mean-Accumulated-Thresholded (MAT) filter, in order to capture 'true' object motion vectors from video sequences with or without the camera motion (zoom and/or pan). Experimental results on representative standard video sequences are included to establish the superiority of our filter compared with the traditional median and mean filters
- …