Synergistic multi-doping effects on the Li7La3Zr2O12 solid electrolyte for fast lithium ion conduction.

Here, we investigate the doping effects on the lithium ion transport behavior in garnet Li7La3Zr2O12 (LLZO) from the combined experimental and theoretical approach. The concentration of Li ion vacancy generated by the inclusion of aliovalent dopants such as Al(3+) plays a key role in stabilizing the cubic LLZO. However, it is found that the site preference of Al in 24d position hinders the three dimensionally connected Li ion movement when heavily doped according to the structural refinement and the DFT calculations. In this report, we demonstrate that the multi-doping using additional Ta dopants into the Al-doped LLZO shifts the most energetically favorable sites of Al in the crystal structure from 24d to 96 h Li site, thereby providing more open space for Li ion transport. As a result of these synergistic effects, the multi-doped LLZO shows about three times higher ionic conductivity of 6.14 × 10(-4) S cm(-1) than that of the singly-doped LLZO with a much less efforts in stabilizing cubic phases in the synthetic condition

H2 pressure swing adsorption for IGCC power plant and techno-economic analysis of integrating PSA to IGCC with carbon capture

Carbon capture and sequestration technologies emerge as the effectual remediation processes to reduce CO2 emissions from coal power plants. Integrated gasification combined cycle (IGCC) is a representative technology for utilizing coal as feedstock and is consequently playing a more important role to cover the global energy demand. The IGCC produces H2-rich mixture at high pressures (30-35 bar) after capturing CO2. It is reported that the high purity H2 recovered from the IGCC process can be economically supplied to a hydrogen turbine or fuel cell. And a PSA process is a strong candidate to produce high purity H2 from the IGCC effluent gas. However, due to higher operating pressure than the present H2 PSA processes, reducing the operating costs and efficiency has emerged as one of the key issues. Please click Additional Files below to see the full abstract

Carrier transport mechanisms of hybrid ZnO nanorod-polymer LEDs

A hybrid polymer-nanorod (NR) light-emitting diode (LED), consisting of a hole-conducting polymer poly (9-vinyl carbazole) (PVK) and ZnO nanorod (NR) composite, with the device structure of glass/indium-tin-oxide (ITO)/PEDOT:PSS/(PVK + ZnO nanorods)/Al is fabricated through a simple spin coating technique. TEM images shows inhomogeneous deposition and the agglomeration of ZnO NRs, which is explained through their low probability of adsorption on PVK due to two-dimensional structural property. In the current-voltage characteristics, negative differential resistance (NDR) phenomenon is observed corresponding to device structure without ZnO NRs. The carrier transport behavior in the LED device is well described by both ohmic and space-chargelimited-current (SCLC) mechanisms. Broad blue electroluminescence (EL) consisting of two sub peaks, are centered at 441 nm and the other at 495 nm, is observed, which indicates that the ZnO nanorod play a role as a recombination center for excitons. The red shift in the position of the EL compared to that photoluminescence is well explained through band offsets at the heterojunction between the PVK and ZnO NRs

Water-Soluble Epitaxial NaCl Thin Film for Fabrication of Flexible Devices

We studied growth mechanisms of water-soluble NaCl thin films on single crystal substrates. Epitaxial growth of NaCl(100) on Si(100) and domain-matched growth of NaCl(111) on c-sapphire were obtained at thicknesses below 100 nm even at room temperature from low lattice mismatches in both cases. NaCl thin film, which demonstrates high solubility selectivity for water, was successfully applied as a water-soluble sacrificial layer for fabrication of several functional materials, such as WO3 nano-helix and Sn doped In2O3 nano-branches.111Ysciescopu

Factors affecting the long-term outcomes of idiopathic membranous nephropathy

Abstract Background We attempted to describe the clinical features and determine the factors associated with renal survival in idiopathic membranous nephropathy (iMN) patients with nephrotic syndrome (NS) and to determine the factors associated with spontaneous complete remission (sCR) and progression to NS in iMN patients with subnephrotic proteinuria. Methods This retrospective study involved 166 iMN patients with NS and 65 patients with subnephrotic proteinuria. The primary end point was a doubling of serum creatinine or initiation of dialysis. In patients with subnephrotic proteinuria, we determined the factors associated with sCR and factors associated with progression to NS. Results Remission of NS was achieved in 125 out of 166 patients (75.3%). Of those who reached remission, 26 patients (20.8%) experienced relapse that was followed by second remission. The relapse or persistence of proteinuria was associated with the primary end points (hazard ratio [HR] = 12.40, P = 0.037, HR = 173, P < 0.001, respectively). In patients with subnephrotic proteinuria, sCR occurred in 35.4% of the patients. The patients with sCR had lower proteinuria and serum creatinine levels and higher serum albumin concentrations at baseline. The serum albumin level at diagnosis was a prognostic factor for progression to NS (Odds ratio [OR] = 0.015, P < 0.001). Conclusions The occurrence of relapse or persistence of proteinuria had negative effects on renal survival in iMN patients with NS, and low serum albumin levels at baseline were associated with non-achievement of sCR and progression to NS

Effect of Microstructural Constituents on Hydrogen Embrittlement Resistance of API X60, X70, and X80 Pipeline Steels

This study describes how microstructural constituents affected the hydrogen embrittlement resistance of high-strength pipeline steels. The American Petroleum Institute (API) X60, X70, and X80 pipeline steels demonstrated complicated microstructure comprising polygonal ferrite (PF), acicular ferrite, granular bainite (GB), bainitic ferrite (BF), and secondary phases, e.g., the martensite-austenite (MA) constituent, and the volume fraction of the microstructures was dependent on alloying elements and processing conditions. To evaluate the hydrogen embrittlement resistance, a slow strain rate test (SSRT) was performed after electrochemical hydrogen charging. The SSRT results indicated that the X80 steel with the highest volume fraction of the MA constituent demonstrated relatively high yield strength but exhibited the lowest hydrogen embrittlement resistance because the MA constituent acted as a reversible hydrogen trap site

Crystal structure of hyperthermophilic esterase EstE1 and the relationship between its dimerization and thermostability properties

<p>Abstract</p> <p>Background</p> <p>EstE1 is a hyperthermophilic esterase belonging to the hormone-sensitive lipase family and was originally isolated by functional screening of a metagenomic library constructed from a thermal environmental sample. Dimers and oligomers may have been evolutionally selected in thermophiles because intersubunit interactions can confer thermostability on the proteins. The molecular mechanisms of thermostabilization of this extremely thermostable esterase are not well understood due to the lack of structural information.</p> <p>Results</p> <p>Here we report for the first time the 2.1-Å resolution crystal structure of EstE1. The three-dimensional structure of EstE1 exhibits a classic α/β hydrolase fold with a central parallel-stranded beta sheet surrounded by alpha helices on both sides. The residues Ser154, Asp251, and His281 form the catalytic triad motif commonly found in other α/β hydrolases. EstE1 exists as a dimer that is formed by hydrophobic interactions and salt bridges. Circular dichroism spectroscopy and heat inactivation kinetic analysis of EstE1 mutants, which were generated by structure-based site-directed mutagenesis of amino acid residues participating in EstE1 dimerization, revealed that hydrophobic interactions through Val274 and Phe276 on the β8 strand of each monomer play a major role in the dimerization of EstE1. In contrast, the intermolecular salt bridges contribute less significantly to the dimerization and thermostability of EstE1.</p> <p>Conclusion</p> <p>Our results suggest that intermolecular hydrophobic interactions are essential for the hyperthermostability of EstE1. The molecular mechanism that allows EstE1 to endure high temperature will provide guideline for rational design of a thermostable esterase/lipase using the lipolytic enzymes showing structural similarity to EstE1.</p

Direct activation of Transient Receptor Potential Vanilloid 1(TRPV1) by Diacylglycerol (DAG)

The capsaicin receptor, known as transient receptor potential channel vanilloid subtype 1 (TRPV1), is activated by a wide range of noxious stimulants and putative ligands such as capsaicin, heat, pH, anandamide, and phosphorylation by protein kinase C (PKC). However, the identity of endogenous activators for TRPV1 under physiological condition is still debated. Here, we report that diacylglycerol (DAG) directly activates TRPV1 channel in a membrane-delimited manner in rat dorsal root ganglion (DRG) neurons. 1-oleoyl-2-acetyl-sn-glycerol (OAG), a membrane-permeable DAG analog, elicited intracellular Ca2+ transients, cationic currents and cobalt uptake that were blocked by TRPV1-selective antagonists, but not by inhibitors of PKC and DAG lipase in rat DRG neurons or HEK 293 cells heterologously expressing TRPV1. OAG induced responses were about one fifth of capsaicin induced signals, suggesting that OAG displays partial agonism. We also found that endogenously produced DAG can activate rat TRPV1 channels. Mutagenesis of rat TRPV1 revealed that DAG-binding site is at Y511, the same site for capsaicin binding, and PtdIns(4,5)P2binding site may not be critical for the activation of rat TRPV1 by DAG in heterologous system. We propose that DAG serves as an endogenous ligand for rat TRPV1, acting as an integrator of Gq/11-coupled receptors and receptor tyrosine kinases that are linked to phospholipase C