All Technologies Work Together for Good: A Glance to Future Mobile Networks

The astounding capacity requirements of 5G have motivated researchers to investigate the feasibility of many potential technologies, such as massive multiple-input multiple-output, millimeter wave, full-duplex, non-orthogonal multiple access, carrier aggregation, cognitive radio, and network ultra-densification. The benefits and challenges of these technologies have been thoroughly studied either individually or in a combination of two or three. It is not clear, however, whether all potential technologies operating together lead to fulfilling the requirements posed by 5G. This paper explores the potential benefits and challenges when all technologies coexist in an ultra-dense cellular environment. The sum rate of the network is investigated with respect to the increase in the number of small-cells and results show the capacity gains achieved by the coexistence.Comment: Accepted for publication in IEEE Wireless Communication, Special Issue-5G mmWave Small Cell Networks: Architecture, Self-Organization and Managemen

Mobile Edge Computing and Artificial Intelligence: A Mutually-Beneficial Relationship

This article provides an overview of mobile edge computing (MEC) and artificial intelligence (AI) and discusses the mutually-beneficial relationship between them. AI provides revolutionary solutions in nearly every important aspect of the MEC offloading process, such as resource management and scheduling. On the other hand, MEC servers are utilized to avail a distributed and parallelized learning framework, namely mobile edge learning.Comment: 6 pages, 2 figures, IEEE ComSoc Technical Committees Newslette

Is Self-Interference in Full-Duplex Communications a Foe or a Friend?

This paper studies the potential of harvesting energy from the self-interference of a full-duplex base station. The base station is equipped with a self-interference cancellation switch, which is turned-off for a fraction of the transmission period for harvesting the energy from the self-interference that arises due to the downlink transmission. For the remaining transmission period, the switch is on such that the uplink transmission takes place simultaneously with the downlink transmission. A novel energy-efficiency maximization problem is formulated for the joint design of downlink beamformers, uplink power allocations and transmission time-splitting factor. The optimization problem is nonconvex, and hence, a rapidly converging iterative algorithm is proposed by employing the successive convex approximation approach. Numerical simulation results show significant improvement in the energy-efficiency by allowing self-energy recycling.Comment: Accepted for publication in IEEE Signal Processing Letter

Full-Duplex Communications: Performance in Ultra-Dense Small-Cell Wireless Networks

Theoretically, full-duplex (FD) communications can double the spectral-efficiency (SE) of a wireless link if the problem of self-interference (SI) is completely eliminated. Recent developments towards SI cancellation techniques have allowed to realize the FD communications on low-power transceivers, such as small-cell (SC) base stations. Consequently, the FD technology is being considered as a key enabler of 5G and beyond networks. In the context of 5G, FD communications have been initially investigated in a single SC and then into multiple SC environments. Due to FD operations, a single SC faces residual SI and intra-cell co-channel interference (CCI), whereas multiple SCs face additional inter-cell CCI, which grows with the number of neighboring cells. The surge of interference in the multi-cell environment poses the question of the feasibility of FD communications. In this article, we first review the FD communications in single and multiple SC environments and then provide the state-of-the-art for the CCI mitigation techniques, as well as FD feasibility studies in a multi-cell environment. Further, through numerical simulations, the SE performance gain of the FD communications in ultra-dense massive multiple input multiple-output enabled millimeter wave SCs is presented. Finally, potential open research challenges of multi-cell FD communications are highlighted.Comment: Accepted for publication in IEEE Vehicular Technology Magazine, Special Issue on 5G Technologies and Application

NOMA in 5G Systems: Exciting Possibilities for Enhancing Spectral Efficiency

This article provides an overview of power-domain non-orthogonal multiple access for 5G systems. The basic concepts and benefits are briefly presented, along with current solutions and standardization activities. In addition, limitations and research challenges are discussed.Comment: 6 pages, 1 figure, IEEE 5G Tech Focu

On the Performance of Network NOMA in Uplink CoMP Systems: A Stochastic Geometry Approach

To improve the system throughput, this paper proposes a network non-orthogonal multiple access (N-NOMA) technique for the uplink coordinated multi-point transmission (CoMP). In the considered scenario, multiple base stations collaborate with each other to serve a single user, referred to as the CoMP user, which is the same as for conventional CoMP. However, unlike conventional CoMP, each base station in N-NOMA opportunistically serves an extra user, referred to as the NOMA user, while serving the CoMP user at the same bandwidth. The CoMP user is typically located at the cell-edge, whereas users close to the base stations are scheduled as NOMA users. Hence, the channel conditions of the two kind of users are very distinctive, which facilitates the implementation of NOMA. Compared to the conventional orthogonal multiple access based CoMP scheme, where multiple base stations serve a single CoMP user only, the proposed N-NOMA scheme can support larger connectivity by serving the extra NOMA users, and improve the spectral efficiency by avoiding the CoMP user solely occupying the spectrum. A stochastic geometry approach is applied to model the considered N-NOMA scenario as a Poisson cluster process, based on which closed-form analytical expressions for outage probabilities and ergodic rates are obtained. Numerical results are presented to show the accuracy of the analytical results and also demonstrate the superior performance of the proposed N-NOMA scheme

Network Coding with Link Layer Cooperation in Wireless Mesh Networks

In recent years, network coding has emerged as an innovative method that helps wireless network approaches its maximum capacity, by combining multiple unicasts in one broadcast. However, the majority of research conducted in this area is yet to fully utilize the broadcasting nature of wireless networks, and still assumes fixed route between the source and destination that every packet should travel through. This assumption not only limits coding opportunities, but can also cause buffer overflow in some specific intermediate nodes. Although some studies considered scattering of the flows dynamically in the network, they still face some limitations. This paper explains pros and cons of some prominent research in network coding and proposes FlexONC (Flexible and Opportunistic Network Coding) as a solution to such issues. The performance results show that FlexONC outperforms previous methods especially in worse quality networks, by better utilizing redundant packets spread in the network.Comment: 6 pages, 6 figures, IEEE International Conference on Communications (ICC), 201

Performance Analysis of Network Coding with IEEE 802.11 DCF in Multi-Hop Wireless Networks

Network coding is an effective idea to boost the capacity of wireless networks, and a variety of studies have explored its advantages in different scenarios. However, there is not much analytical study on throughput and end-to-end delay of network coding in multi-hop wireless networks considering the specifications of IEEE 802.11 Distributed Coordination Function. In this paper, we utilize queuing theory to propose an analytical framework for bidirectional unicast flows in multi-hop wireless mesh networks. We study the throughput and end-to-end delay of inter-flow network coding under the IEEE 802.11 standard with CSMA/CA random access and exponential back-off time considering clock freezing and virtual carrier sensing, and formulate several parameters such as the probability of successful transmission in terms of bit error rate and collision probability, waiting time of packets at nodes, and retransmission mechanism. Our model uses a multi-class queuing network with stable queues, where coded packets have a non-preemptive higher priority over native packets, and forwarding of native packets is not delayed if no coding opportunities are available. Finally, we use computer simulations to verify the accuracy of our analytical model.Comment: 14 pages, 11 figures, IEEE Transactions on Mobile Computing, 201

FlexONC: Joint Cooperative Forwarding and Network Coding with Precise Encoding Conditions

In recent years, network coding has emerged as an innovative method that helps a wireless network approach its maximum capacity, by combining multiple unicasts in one broadcast. However, the majority of research conducted in this area is yet to fully utilize the broadcasting nature of wireless networks, and still assumes fixed route between the source and destination that every packet should travel through. This assumption not only limits coding opportunities, but can also cause buffer overflow in some specific intermediate nodes. Although some studies considered scattering of the flows dynamically in the network, they still face some limitations. This paper explains pros and cons of some prominent research in network coding and proposes a Flexible and Opportunistic Network Coding scheme (FlexONC) as a solution to such issues. Furthermore, this research discovers that the conditions used in previous studies to combine packets of different flows are overly optimistic and would affect the network performance adversarially. Therefore, we provide a more accurate set of rules for packet encoding. The experimental results show that FlexONC outperforms previous methods especially in networks with high bit error rate, by better utilizing redundant packets spread in the network.Comment: 15 pages, 27 figure

Energy-Efficient Joint User-RB Association and Power Allocation for Uplink Hybrid NOMA-OMA

In this paper, energy efficient resource allocation is considered for an uplink hybrid system, where non-orthogonal multiple access (NOMA) is integrated into orthogonal multiple access (OMA). To ensure the quality of service for the users, a minimum rate requirement is pre-defined for each user. We formulate an energy efficiency (EE) maximization problem by jointly optimizing the user clustering, channel assignment and power allocation. To address this hard problem, a many-to-one bipartite graph is first constructed considering the users and resource blocks (RBs) as the two sets of nodes. Based on swap matching, a joint user-RB association and power allocation scheme is proposed, which converges within a limited number of iterations. Moreover, for the power allocation under a given user-RB association, we first derive the feasibility condition. If feasible, a low-complexity algorithm is proposed, which obtains optimal EE under any successive interference cancellation (SIC) order and an arbitrary number of users. In addition, for the special case of two users per cluster, analytical solutions are provided for the two SIC orders, respectively. These solutions shed light on how the power is allocated for each user to maximize the EE. Numerical results are presented, which show that the proposed joint user-RB association and power allocation algorithm outperforms other hybrid multiple access based and OMA-based schemes.Comment: Non-orthogonal multiple access (NOMA), energy efficiency (EE), power allocation (PA), uplink transmissio