A molecular model to explain the controlled release from SBA-15 functionalized with APTES

A molecular model with the approximate pore diameter of SBA-15 was constructed for the first time to investigate the effect of functionalize the matrix with 3-aminopropyl-triethoxy-silane (APTES) in the release of Chicago Sky Blue 6B (CSB). It was expected that the positively charged amino groups of APTES could interact with the negatively charged sulphonic groups of CSB allowing controlling the release process. Indeed the experimental study showed that the release kinetics of CSB from SBA-15-APTES is two orders of magnitude smaller than from native SBA-15. However molecular modelling calculations investigating the possible interactions of APTES and SBA-15 yield unexpected results. In the model including only the condensation between the silanol groups of SBA-15 and APTES, the calculated interaction energy of CSB was quite similar than with the model of native SBA-15. However when additional electrostatic interactions of the -NH2 groups of APTES with the mesoporous matrix were modelled the mesoporous channels underwent a considerable deformation. These results point to the structure deformation as the cause of the greater retention of CSB in SBA-15-APTES and warn about the special features of AFTES when used to functionalize mesoporous silica materials. The model built in this paper could be used to construct predictive models in analogous drug delivery systems. (C) 2014 Elsevier Inc. All rights reserved

Mesoporous silica nanoparticles as a new carrier methodology in the controlled release of the active components in a polypill

Polypill is a medication designed for preventing heart attacks through a combination of drugs. Current formulations contain blood pressure-lowering drugs and others, such statins or acetylsalicylic acid. These drugs exhibit different physical chemical features, and consequently different release kinetics. Therefore, the concentration in plasma of some of them after the release process can be out of the therapeutic range. This paper investigates a new methodology for the control dosage of a polypill recently reported containing hydrochlorothiazide, amlodipine, losartan and simvastatin in a 12.5/2.5/25/40 weight ratio. The procedure is based onmesoporous silica nanoparticles (MSN) with MCM-41 structure (MSN-41) used as carrier, aimed to control release of the four drugs included in the polypill. In vitro release data were obtained by HPLC and the curves adjusted with a kinetic model. To explain the release results, a molecular model was built to determine the drug-matrix interactions, and quantum mechanical calculations were performed to obtain the electrostatic properties of each drug. Amlodipine, losartan and simvastatin were released from the polypill-MSN-41 system in a controlled way. This would be a favourable behavior when used clinically because avoid too quick pressure decrease. However, the diuretic hydrochlorothiazide was quickly released from our system in the first minutes, as is needed in hypertensive urgencies. In addition, an increase in the stability of amlodipine and hydrochlorothiazide occurred in the polypill-MSN-41 system. Therefore, the new way of polypill dosage proposed can result in a safer and effective treatment. (C) 2016 Elsevier B.V. All rights reserved

Tailoring hierarchical meso- macroporous 3D scaffolds: from nano to macro

Bone tissue regeneration requires the use of 3D scaffolds which mimic the architecture of the natural extracellular matrix, creating an adequate microenvironment for bone cell growth. Such 3D scaffolds need surface properties suitable for biological recognition in the early stage of cell adhesion, necessary to ensure complete cell colonization, retained cell functionality, and subsequently bone regeneration. Herein, hierarchical 3D scaffolds based on new hydroxyapatite/mesoporous glass nanocomposite bioceramic (MGHA) exhibiting different scales of porosity have been synthesized. These 3D scaffolds possess: (i) highly ordered mesopores with diameters of 10 nm; (ii) macropores with diameters in the 30-80 mu m range with interconnections of 1-10 mu m; and (iii) large macropores of ca. 500 mu m. To improve their surface properties, 3D scaffolds were modified through direct functionalization with amine propyl groups, which notably improve preosteoblast adhesion, proliferation (2.3 fold), differentiation (4.8 fold) and further cell colonization of these scaffolds. The observed enhancement can be related to these amine groups which favour early adhesion, e. g., based on nonspecific protein adsorption as was demonstrated by ellipsometry. These results suggest that the combination of hierarchical structure design and amine surface modification of hydroxyapatite/mesoporous nanocomposite scaffolds yields a double increase in cell proliferation, as well as a quadruple increase in cell differentiation, demonstrating the potential of these nanocomposite materials for bone tissue regeneration purposes

Aprendizaje autónomo del Laboratorio de Química Inorgánica mediante el uso de TICs

Se ha creado un Entorno Virtual de Enseñanza y Aprendizaje (EVEA) circunscrito a la realización de prácticas en el Laboratorio de Química Inorgánica orientado a incrementar el grado de interacción entre el alumno con algún tipo de dificultad auditiva o dificultad idiomática y el profesor o el resto de sus compañeros mediante el uso conjunto del material elaborado y el uso de sistemas basados en redes sociales, mensajerías

Multifunctional pH sensitive 3D scaffolds for treatment and prevention of bone infection

Multifunctional-therapeutic three-dimensional (3D) scaffolds have been prepared. These biomaterials are able to destroy the S. aureus bacterial biofilm and to allow bone regeneration at the same time. The present study is focused on the design of pH sensitive 3D hierarchical meso-macroporous 3D scaffolds based on MGHA nanocomposite formed by a mesostructured glassy network with embedded hydroxyapatite nanoparticles, whose mesopores have been loaded with levofloxacin (Levo) as antibacterial agent. These 3D platforms exhibit controlled and pH-dependent Levo release, sustained over time at physiological pH (7.4) and notably increased at infection pH (6.7 and 5.5), which is due to the different interaction rate between diverse Levo species and the silica matrix. These 3D systems are able to inhibit the S. aureus growth and to destroy the bacterial biofilm without cytotoxic effects on human osteoblasts and allowing an adequate colonization and differentiation of preosteoblastic cells on their surface. These findings suggest promising applications of these hierarchical MGHA nanocomposite 3D scaffolds for the treatment and prevention of bone infection. Statement of Significance Multifunctional 3D nanocomposite scaffolds with the ability for loading and sustained delivery of an antimicrobial agent, to eliminate and prevent bone infection and at the same time to contribute to bone regeneration process without cytotoxic effects on the surrounding tissue has been proposed. These 3D scaffolds exhibit a sustained levofloxacin delivery at physiological pH (pH 7.4), which increasing notably when pH decreases to characteristic values of bone infection process (pH 6.7 and pH 5.5). In vitro competitive assays between preosteoblastic and bacteria onto the 3D scaffold surface demonstrated an adequate osteoblast colonization in entire scaffold surface together with the ability to eliminate bacteria contamination

ZnO-mesoporous glass scaffolds loaded with osteostatin and mesenchymal cells improve bone healing in a rabbit bone defect.

The use of 3D scaffolds based on mesoporous bioactive glasses (MBG) enhanced with therapeutic ions, biomolecules and cells is emerging as a strategy to improve bone healing. In this paper, the osteogenic capability of ZnO-enriched MBG scaffolds loaded or not with osteostatin (OST) and human mesenchymal stem cells (MSC) was evaluated after implantation in New Zealand rabbits. Cylindrical meso-macroporous scaffolds with composition (mol %) 82.2SiO2–10.3CaO–3.3P2O5–4.2ZnO (4ZN) were obtained by rapid prototyping and then, coated with gelatin for easy handling and potentiating the release of inorganic ions and OST. Bone defects (7.5 mm diameter, 12 mm depth) were drilled in the distal femoral epiphysis and filled with 4ZN, 4ZN+MSC, 4ZN+OST or 4ZN+MSC+OST materials to evaluate and compare their osteogenic features. Rabbits were sacrificed at 3 months extracting the distal third of bone specimens for necropsy, histological and microtomography (µCT) evaluations. Systems investigated exhibited bone regeneration capability. Thus, trabecular bone volume density (BV/TV) values obtained from µCT showed that the good bone healing capability of 4ZN was significantly improved by the scaffolds coated with OST and MSC. Our findings in vivo suggest the interest of these MBG complete systems to improve bone repair in the clinical practice

Implementación de los recursos audiovisuales elaborados para el aprendizaje autónomo del Laboratorio de Química. Potenciación de la compresión por parte de personas con dificultades auditivas y del aprendizaje del vocabulario técnico en ingles

Depto. de Química en Ciencias FarmacéuticasFac. de FarmaciaFALSEsubmitte

Creation of an interactive periodic table of chemical elements and their ordered properties with internet access

Se ha construido una base de datos con las propiedades de los elementos químicos, isótopos naturales y artificiales de los elementos y el tiempo de semivida de los radiactivos, así como, la serie de la tabla periódica a la que pertenecen, carácter metálico/no metálico/metaloide, configuración electrónica y número atómico, etimología, descubridor y año de descubrimiento de cada elemento químico y de alguna/s de sus características o curiosidades más significativas.Depto. de Química en Ciencias FarmacéuticasFac. de FarmaciaFALSEUniversidad Complutensesubmitte