23 research outputs found
Polycaprolactone Scaffolds Fabricated via Bioextrusion for Tissue Engineering Applications
The most promising approach in Tissue Engineering involves the seeding of porous, biocompatible/biodegradable scaffolds, with donor cells to promote tissue regeneration.
Additive biomanufacturing processes are increasingly recognized as ideal techniques to produce 3D structures with optimal pore size and spatial distribution, providing an adequate mechanical support for tissue regeneration while shaping in-growing tissues. This paper presents a novel extrusion-based system to produce 3D scaffolds with controlled internal/external geometry for TE applications.The BioExtruder is a low-cost system that uses a proper fabrication code based on the ISO programming language enabling the fabrication of multimaterial scaffolds. Poly(ε-caprolactone) was the material chosen to produce porous scaffolds, made by layers of directionally aligned microfilaments. Chemical, morphological, and in vitro biological evaluation performed on the polymeric constructs revealed a high potential of the BioExtruder to produce 3D scaffolds with regular and reproducible macropore architecture, without inducing relevant chemical and biocompatibility alterations of the material
In vitro study on the generation of tympanic membrane substitutes via tissue engineering
The tympanic membrane (TM) is an anatomical structure with unique histological and physiological features playing a fundamental role in sound transmission. In particular, the middle layer of the pars tensa, which represents the widest and thickest surface portion of the TM, consists of connective tissue mainly composed of collagen types II and III fibers, while collagen type I is present at a lesser extent [1]. Several pathologies affect the TM, including otitis media, tympanosclerosis, cholesteatoma and perforation that require reconstructive surgery depending on the lesion extent [2]. To this purpose, the temporalis fascia is currently considered as the gold standard material. However, due to limited graft availability, fully synthetic substitutes are also applied, with poorly satisfactory outcomes. For these reasons new strategies for TM replacement are still needed. In this study, we employed a tissue engineering (TE) approach for the regeneration of TM substitutes selecting some biocompatible and bioresorbable polymeric matrices to be cultured with human bone marrow-derived mesenchymal stem cells (MSCs). We set up a cell differentiation protocol using an appropriate mix of growing factors to obtain the in vitro differentiation of MSCs into TM fibroblasts. Furthermore, because of the role played by mechanical forces in TM motion, these engineered substitutes underwent mechanical stress during the culture. The obtained biohybrid constructs were characterized about cellular viability assays, gene expression quantification as well as histochemical and immunohistochemical analyses. Moreover, native TMs from cadavers were investigated for assessment and optimization of the engineered constructs. Our results showed that MSCs were able to grow and differentiate properly on the selected biomaterials and to synthesize appropriate extracellular matrix molecules. Moreover, the applied mechanical forces seem to promote TM-fibroblastic differentiation, increasing the production of collagen type II, that is a peculiarity of TM structure
Intracellular fate investigation of bio-eliminable polymeric nanoparticles by Confocal Laser Scanning Microscopy (CLSM)
Additive manufacturing of star poly(ε-caprolactone) wet-spun scaffolds for bone tissue engineering applications
Three-dimensional fibrous scaffolds made of a three-arm star poly(ε-caprolactone) were developed by employing a novel computer-aided wet-spinning apparatus to precisely control the deposition pattern of an extruded polymeric solution as a filament into a coagulation bath. Star poly(ε-caprolactone)/hydroxyapatite composite scaffolds composed of fibres with a porous morphology both in the outer surface and in the cross section were successfully produced with a layer-by-layer approach achieving good reproducibility of the internal architecture and external shape. Changes in processing parameters were used to fabricate scaffolds with different architectural parameters in terms of average pore size in the xy-axes (from 190 to 297 µm) and in the z-axis (from 54 to 126 µm) and porosity (in the range of 20%–60%). Based on the mechanical characterization, processing variations and hydroxyapatite loading have an influence on scaffold compression properties. Cell cultures, using a murine pre-osteoblast cell line, had good cell responses in terms of proliferation and osteoblastic differentiation. Thus, this technique appears to be an effective method for producing customized polymeric scaffolds for bone tissue engineering applications
Intracellular Fate Investigation of Bioeliminable Polymeric Nanoparticles by Confocal Laser Scanning Microscopy
his is a study of the in vitro cytotoxicity and intracellular fate of poly[(glycylglycinemethaerylamide)-co-N-(2-hydroxypropylmethacrylamidey)] bio-eliminable polymer samples and relative nanoparticles in Balb/c 3T3 cloned A31 mouse embryo fibroblasts cell line by using Confocal Laser Scanning Microscopy (CLSM). Nanoparticles were prepared by co-precipitating the polymers with fluorescein labeled human serum albumin (HSA-FITC) as the fluorescent probe and as the model protein drug. The toxicity of the polymers containing 25, 50 and 100%, respectively, of (glycylglycinemethacrylamide). (GGMA) was investigated in terms of cytoskeleton morphology by exposing cells to various concentrations of polymers for 24 h. Under normal culture conditions, fibroblast cells exhibit characteristic spreading and shape, however, when the cell cultures were subjected to chemical, metabolic or physical stress, their morphology changed reducing their visibility. The polymers with the lower glycine content exert a lower toxicity even at high concentrations [8.5 mg/mL]. The cellular uptake of nanoparticles was determined by incubating fibroblasts with HSA-FITC loaded particles and HSA-FITC alone at three different time points. The results indicate that nanoparticles were up-taken by the cells in a time dependent fashion. Preliminary evaluation of the intracellular fate of the prepared nanoparticles indicate their possible lysosomal escape
Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid
Poly(lactic-co-glycolic acid) (PLGA) meshes loaded with retinoic acid (RA) were prepared by applying the electrospinning technique. The purpose of the present work was to combine the biological effects of RA and the advantages of electrospun meshes to enhancing the mass transfer features of controlled release systems and cell interaction with polymeric scaffolds. The processing conditions for the fabrication of three-dimensional meshes were optimized by studying their influence on mesh morphology. Tensile testing showed that RA loading influenced the meshes mechanical properties by increasing their strength and rigidity. Moreover, the drug release and degradation profiles of the electrospun systems were compared to analogous RA-loaded PLGA films prepared by solvent casting. The results of this study highlight that the electrospun meshes preserved their fibrous structure after 4 months under in vitro physiological conditions and showed a sustained controlled release of the loaded agent in comparison to that observed for cast films. The bioactivity of the loaded RA was investigated on murine preosteoblasts cells by evaluating its influence on cell proliferation and morphology
Bioeliminable polymeric nanoparticles for proteic drug delivery
Bioeliminable co-polymers based on poly (methacryloylglycylglycine-OHx-co-hydroxypropylmethacrylamide(y)) were successfully converted into nanoparticles by using the co-precipitation technique. Human serum albumin (HSA) and a modified (beta-cyclodextrin were used, respectively, as model protein drug and stabilizer. Nanoparticles were characterized from a dimensional and morphological point of view by means of laser diffraction granulometry and scanning electron microscopy (SEM). The prepared nanoparticles displayed a monomodal diameter distribution in the range of 130 nm, confirmed by SEM micrographs. Protein loading efficiency and drug release kinetics investigations, carried out on bioeliminable nanoparticles loaded with fluoresceinated HSA (HSA-FITC), showed that protein loading is in the range of 60% with a typical time controlled release profile.
In vitro cytotoxicity investigations of the polymer matrices and resulting nanoparticles were carried out by using different assays aimed at the evaluation of the interactions of the materials with cell metabolism and the cell membrane. On the whole, bioeliminable polymers and nanoparticles resulted in high cytocompatibility thus suggesting their suitability for biomedical applications
Fibrous star poly(ε-caprolactone) melt-electrospun scaffolds for wound healing applications
Polymeric fibrous scaffolds based on the biocompatible and biodegradable three-arm-branched star poly(ε-caprolactone) (Mw = 189,000 g/mol) were prepared by a melt electrospinning technique. The possibility of processing polymers without the use of organic solvents is one of the main advantages over solution electrospinning. Scaffolds were biologically tested for their ability of supporting skin tissue regeneration. For this purpose, mouse embryo fibroblast (BALB/3T3 clone A31) and human keratinocyte (HaCaT) cell lines were selected as models, and seeded onto the polymeric supports both as single and co-culture. Cell viability, proliferation, and collagen production were assessed by WST-1 assay and Direct Red 80 dye, respectively. Cell morphology and colonization of the supports were evaluated by scanning electron microscopy and confocal laser scanning microscopy. Results highlighted that the star poly(ε-caprolactone) scaffolds were able to promote collagen production by fibroblasts. In co-culture studies, scaffolds supported adhesion, proliferation, and spatial organization of both cell lines. By virtue of the observed results, the developed polymeric scaffolds appeared suitable as biodegradable and biocompatible three-dimensional supports for skin tissue regeneration in wound healing dressing