2 research outputs found
Flux pinning characteristics in cylindrical ingot niobium used in superconducting radio frequency cavity fabrication
We present the results of from DC magnetization and penetration depth
measurements of cylindrical bulk large-grain (LG) and fine-grain (FG) niobium
samples used for the fabrication of superconducting radio frequency (SRF)
cavities. The surface treatment consisted of electropolishing and low
temperature baking as they are typically applied to SRF cavities. The
magnetization data were fitted using a modified critical state model. The
critical current density Jc and pinning force Fp are calculated from the
magnetization data and their temperature dependence and field dependence are
presented. The LG samples have lower critical current density and pinning force
density compared to FG samples which implies a lower flux trapping efficiency.
This effect may explain the lower values of residual resistance often observed
in LG cavities than FG cavities
Review of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities
As a result of collaboration between Jefferson Lab and niobium manufacturer Companhia Brasileira de Metalurgia e Mineração (CBMM), ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large-grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This work triggered research activities in other SRF laboratories around the world. Large-grain (LG) niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this technology. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown performances comparable to the best cavities made from standard fine-grain niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of . The quality factor of those cavities was also higher than that of fine-grain (FG) cavities processed with the same methods. Such performance levels push the state-of-the art of SRF technology and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and highlights some of the differences compared to standard FG material and opportunities for further developments