Transverse tripolar stimulation for selective FNS

Various anode-cathode configurations in a nerve cuff were modeled in order to optimize its spatial selectivity characteristics for FNS. Apart from the usual configurations (monopole, bipole, longitudinal tripole, ¿steering¿ anode), a transverse tripolar configuration (central cathode) was examined. The model predictions were verified by acute animal experiments. It is concluded that a transverse tripole activates superficial nerve fibers in a more selective way than other configurations d

The effect of subthreshold prepulses on the recruitment order in a nerve trunk analyzed in a simple and a realistic volume conductor model

The influence of subthreshold depolarizing prepulses on the threshold current-to-distance and the threshold current-to-diameter relationship of myelinated nerve fibers has been investigated. A nerve fiber model was used in combination with both a simple, homogeneous volume conductor model with a point source and a realistic, inhomogeneous volume conductor model of a monofascicular nerve trunk surrounded by a cuff electrode. The models predict that a subthreshold depolarizing prepulse will desensitize Ranvier nodes of fibers in the vicinity of the cathode and thus cause an increase in the threshold current of a subsequent pulse to activate these fibers. If the increase in threshold current of the excited node is large enough, the excitation will be accompanied by a strong hyperpolarization of adjacent nodes, preventing the propagation of action potentials in these fibers. As fibers close to the electrode are more desensitized by prepulses than more distant ones, it is possible to stimulate distant fibers without stimulating such fibers close to the electrode. Moreover, as larger fibers are more desensitized than smaller ones, smaller fibers have lower threshold currents than larger fibers up to a certain distance from the electrode. The realistic model has provided an additional condition for the application of this method to invert nerve fiber recruitment, i.e., real or virtual anodes should be close to the cathode. When using a cuff electrode for this purpose, in the case of monopolar stimulation the cuff length (determining the position of the virtual anodes) should not exceed twice the internodal length of the fibers to be blocked. Similarly, the distance between cathode and anodes should not exceed the internodal length of these fibers when stimulation is to be applied tripolarly

Fascicular Selectivity in Transverse Stimulation with a Nerve Cuff Electrode: A Theoretical Approach

The performance of cathode-anode configurations in a cuff electrode to stimulate a single fascicle in a nerve trunk has been investigated theoretically. A three-dimensional volume conductor model of a nerve trunk with four fascicles in a cuff electrode and a model of myelinated nerve fiber stimulation were used to calculate the recruitment of 15 m fibers in each fascicle. The effect of a monopole, a transverse bipole (anode opposite the cathode), and a narrow transverse tripole (guarded cathode) in selectively stimulating 15 m fibers in each fascicle has been quantified and presented as recruitment curves. It is predicted that selective fascicle stimulation is advanced most by stimulation with a bipole in a plane perpendicular to the axis of the nerve trunk. Monopoles and conventional longitudinal tripoles perform less well, as does a longitudinal tripole with an additional "steering" anode. Apart from transverse bipolar stimulation an additional anode may be used to maximally fit the area of excitation to the topography of the fascicle to be recruited. As compared to monopolar and longitudinal tripolar stimulation, the slope of the recruitment curves in transverse bipolar stimulation is reduced considerably, thus allowing improved fine tuning of nerve (and thus force) recruitment. Another advantage of this method is a minimal number of cable connections to the cuff electrode. The cost of the improved selectivity is an increased stimulation current