Asymptotic behaviour of dam break flow for small times

Two dimensional impulsive flow of a fluid is studied within the potential flow theory. Initially the fluid is at rest and is held on one side of a vertical plate. The plate is withdrawn suddenly and gravity driven flow of the fluid starts. Attention is paid to the singular behaviour of the velocity field at the bottom point, where the vertical free surface meets the rigid bottom. The linear problem is solved by the Fourier series method. An inner region solution is found using Mellin transform at the bottom point. The jet formation is observed at the bottom point. Also the discontinuity at the upper corner point is dealt with Lagrangian variables. For the second order outer problem, domain decomposition method is used. Comparison of the shapes of the free surfaces near the upper corner point with leading and second order solutions shows that the second order outer solution outer makes a larger difference in the vertical free surface than in the horizontal portion, compared with leading order solution.The complete picture of the shapes of the free surfaces using Lagrangian description for the upper part and Eulerian description for the bottom part at the second order is obtained

Experimental determination of the roughness functions of marine coatings

The aim of this paper is to determine the roughness functions of different marine coatings, including two novel FOUL-X-SPEL paints and two existing commercial coatings, and two control surfaces, using the overall method of Granville (1987). An extensive series of towing tests of flat plates coated with different antifouling coatings was carried out at the Kelvin Hydrodynamics Laboratory (KHL) of the University of Strathclyde. The tests were designed to examine the as applied drag performances of FOUL-X-SPEL paints and compare them with two existing reference paints and two control surfaces. The surface roughness amplitude parameters of all of the test surfaces were measured using a hull roughness analyser. In total over 150 runs were carried out, including a series of repeat tests designed to quantify the uncertainty in the results. The drag coefficients and roughness function values of each surface were evaluated along with the uncertainty limits

Pregnancy and Crimean-Congo haemorrhagic fever

AbstractCrimean-Congo Hemorrhagic fever (CCHF) is a potentially fatal viral infection with reported case fatality rates of 5–30%. Humans become infected through tick bites, by contact with a patient with CCHF during the acute phase of infection, or by contact with blood or tissues from viraemic livestock. In this first report in the literature, we present the characteristics of three pregnant women with CCHF infection and the outcome of their babies. Transmission of the CCHF infection could be either intrauterine or perinatal. In endemic regions, CCHF infection should be considered in the differential diagnosis of HELLP syndrome (haemolytic anaemia, elevated liver enzymes, low platelet count), and obstetricians should be familiar with the characteristics of CCHF infection. In the aetiology of necrotising enterocolitis, CCHF should be considered

Universal behavior of localization of residue fluctuations in globular proteins

Localization properties of residue fluctuations in globular proteins are studied theoretically by using the Gaussian network model. Participation ratio for each residue fluctuation mode is calculated. It is found that the relationship between participation ratio and frequency is similar for all globular proteins, indicating a universal behavior in spite of their different size, shape, and architecture.Comment: 4 pages, 3 figures. To appear in Phys. Rev.

Understanding adhesion at as-deposited interfaces from ab initio thermodynamics of deposition growth: thin-film alumina on titanium carbide

We investigate the chemical composition and adhesion of chemical vapour deposited thin-film alumina on TiC using and extending a recently proposed nonequilibrium method of ab initio thermodynamics of deposition growth (AIT-DG) [Rohrer J and Hyldgaard P 2010 Phys. Rev. B 82 045415]. A previous study of this system [Rohrer J, Ruberto C and Hyldgaard P 2010 J. Phys.: Condens. Matter 22 015004] found that use of equilibrium thermodynamics leads to predictions of a non-binding TiC/alumina interface, despite the industrial use as a wear-resistant coating. This discrepancy between equilibrium theory and experiment is resolved by the AIT-DG method which predicts interfaces with strong adhesion. The AIT-DG method combines density functional theory calculations, rate-equation modelling of the pressure evolution of the deposition environment and thermochemical data. The AIT-DG method was previously used to predict prevalent terminations of growing or as-deposited surfaces of binary materials. Here we extent the method to predict surface and interface compositions of growing or as-deposited thin films on a substrate and find that inclusion of the nonequilibrium deposition environment has important implications for the nature of buried interfaces.Comment: 8 pages, 6 figures, submitted to J. Phys.: Condens. Matte

Jamming and Fluctuations in Granular Drag

We investigate the dynamic evolution of jamming in granular media through fluctuations in the granular drag force. The successive collapse and formation of jammed states give a stick-slip nature to the fluctuations which is independent of the contact surface between the grains and the dragged object -- thus implying that the stress-induced collapse is nucleated in the bulk of the granular sample. We also find that while the fluctuations are periodic at small depths, they become "stepped" at large depths, a transition which we interpret as a consequence of the long-range nature of the force chains.Comment: 7 pages, 4 figures, RevTe

Moment Closure - A Brief Review

Moment closure methods appear in myriad scientific disciplines in the modelling of complex systems. The goal is to achieve a closed form of a large, usually even infinite, set of coupled differential (or difference) equations. Each equation describes the evolution of one "moment", a suitable coarse-grained quantity computable from the full state space. If the system is too large for analytical and/or numerical methods, then one aims to reduce it by finding a moment closure relation expressing "higher-order moments" in terms of "lower-order moments". In this brief review, we focus on highlighting how moment closure methods occur in different contexts. We also conjecture via a geometric explanation why it has been difficult to rigorously justify many moment closure approximations although they work very well in practice.Comment: short survey paper (max 20 pages) for a broad audience in mathematics, physics, chemistry and quantitative biolog

An integrated approach of multiple correspondences analysis (MCA) and fuzzy AHP method for occupational health and safety performance evaluation in the land cargo transportation

Land cargo transportation is one of the components of the logistics chain with high impact on economic and social development worldwide. However, problems such as top logistics costs, deficiencies in transportation infrastructure and the failure to adopt good operating practices in aspects such as quality, environment, and occupational safety and health affect the ability of companies to comply with the agreements, requirements, and regulations of the clients and other interested parties. One of the most relevant problems for the sector is associated with the high accident rates that make this medium less advantageous compared to other means of transport with impact on operational costs, on logistics indicators, on compliance with legal regulations and customer satisfaction. However, although there are legal standards and management standards in occupational safety and health, evaluating performance can become a difficult and subjective process, due to the complexity of the land cargo transportation and the different interest groups involved. Besides, there is little information in the literature that provides solutions for the industry. Therefore, this document presents an integrated approach between multi-criterion decision making models (MCDM) and the Multiple Correspondences Analysis (MCA) to facilitate the evaluation and improvement of occupational health and safety performance, with a logical process, objective, robust and using both qualitative and quantitative techniques, with real application in the land cargo transportation sector. First, the multivariate method of Multiple Correspondences Analysis (MCA) was used for the evaluation of a sample of companies in the industry, considering the factors and sub-factors identified in the first stage and performing correlational analyzes among the variables. Subsequently, a multicriteria decision-making model was designed to determine the factors and sub-factors that affect occupational health and safety performance through the technique of the Fuzzy Analytic Hierarchy Process (FAHP). Finally, improvement strategies are proposed based on the approaches suggested in this document

An objective comparison of cell-tracking algorithms

We present a combined report on the results of three editions of the Cell Tracking Challenge, an ongoing initiative aimed at promoting the development and objective evaluation of cell segmentation and tracking algorithms. With 21 participating algorithms and a data repository consisting of 13 data sets from various microscopy modalities, the challenge displays today's state-of-the-art methodology in the field. We analyzed the challenge results using performance measures for segmentation and tracking that rank all participating methods. We also analyzed the performance of all of the algorithms in terms of biological measures and practical usability. Although some methods scored high in all technical aspects, none obtained fully correct solutions. We found that methods that either take prior information into account using learning strategies or analyze cells in a global spatiotemporal video context performed better than other methods under the segmentation and tracking scenarios included in the challenge