Use of solvent extraction to remediate soils contaminated with hydrocarbons

The main objective of this research is to exploit the possibility of using an ex situ solvent extraction technique for the remediation of soils contaminated with semi-volatile petroleum hydrocarbons. The composition of the organic phase was chosen in order to form a single phase mixture with an aqueous phase and simultaneously not being disturbed (forming stable emulsions) by the soil particles hauling the contaminants. It should also permit a regeneration of the organic solvent phase. As first, we studied the miscibility domain of the chosen ternary systems constituted by ethyl acetate–acetone–water. This system proved to satisfy the previous requirements allowing for the formation of a single liquid phase mixture within a large spectrum of compositions, and also allowing for an intimate contact with the soil. Contaminants in the diesel range within different functional groups were selected: xylene, naphthalene and hexadecane. The analytical control was done by gas chromatography with FID detector. The kinetics of the extractions proved to be fast, leading to equilibrium after 10 min. The effect of the solid–liquid ratio on the extraction efficiency was studied. Lower S/L ratios (1:8, w/v) proved to be more efficient, reaching recoveries in the order of 95%. The option of extraction in multiple contacts did not improve the recovery in relation to a single contact. The solvent can be regenerated by distillation with a loss around 10%. The contaminants are not evaporated and they remain in the non-volatile phase. The global results show that the ex situ solvent extraction is technically a feasible option for the remediation of semi-volatile aromatic, polyaromatic and linear hydrocarbons

Electrochemical Biosensing in Cancer Diagnostics and Follow-up

In cancer, screening and early detection are critical for the success of the patient's treatment and to increase the survival rate. The development of analytical tools for non‐invasive detection, through the analysis of cancer biomarkers, is imperative for disease diagnosis, treatment and follow‐up. Tumour biomarkers refer to substances or processes that, in clinical settings, are indicative of the presence of cancer in the body. These biomarkers can be detected using biosensors, that, because of their fast, accurate and point of care applicability, are prominent alternatives to the traditional methods. Moreover, the constant innovations in the biosensing field improve the determination of normal and/or elevated levels of tumour biomarkers in patients’ biological fluids (such as serum, plasma, whole blood, urine, etc.). Although several biomarkers (DNA, RNA, proteins, cells) are known, the detection of proteins and circulating tumour cells (CTCs) are the most commonly reported due to their approval as tumour biomarkers by the specialized entities and commonly accepted for diagnosis by medical and clinical teams. Therefore, electrochemical immunosensors and cytosensors are vastly described in this review, because of their fast, simple and accurate detection, the low sample volumes required, and the excellent limits of detection obtained. The biosensing strategies reported for the six most commonly diagnosed cancers (lung, breast, colorectal, prostate, liver and stomach) are summarized and the distinct phases of the sensors’ constructions (surface modification, antibody immobilization, immunochemical interactions, detection approach) and applications are discussed.Maria Freitas is grateful to FCT‐Fundação para a Ciência e a Tecnologia for her PhD grant (SFRH/BD/111942/2015), financed by POPH‐QREN‐Tipologia 4.1‐Formaçãpo Avançada, subsidized by Fundo Social Europeu and Ministério da Ciência, Tecnologia e Ensino Superior. This work received financial support from the European Union (FEDER funds through COMPETE) and National Funds (FCT) through project UID/QUI/50006/2013.info:eu-repo/semantics/publishedVersio

Application of experimental design methodology to optimize antibiotics removal by walnut shell based activated carbon

Three-level Box-Behnken experimental design with three factors (pH, temperature and antibiotic initial concentration) combined with response surface methodology (RSM) was applied to study the removal of Metronidazole and Sulfamethoxazole by walnut shell based activated carbon. This methodology enabled to identify the effects of the different factors studied and their interactions in the response of each antibiotic. The relationship between the independent variable (sorption capacity) and the dependent variables (pH, temperature and antibiotic concentration) was adequately modelled by second-order polynomial equation. The pH factor exerted a significant but distinct influence on the removal efficiency of both antibiotics. The removal of Metronidazole is favoured by increasing pH values, with the maximum value obtained for pH 8 - upper limit of the study domain; while Sulfamethoxazole displays a maximum value around 5.5, with a decrease in the extent of adsorption as the pH increases. The best conditions, predicted by the model, for the removal of the antibiotic Sulfamethoxazole (106.9 mg/g) are obtained at a temperature of 30 °C, initial concentration of 40 mg/L and a pH value of 5.5. For the antibiotic Metronidazole, the highest removal value (127 mg/g) is expected to occur at the maximum levels attributed to each of the factors (pH = 8, Cin = 40 mg/L, T = 30 °C). The results of isotherm experiments (at 20 °C and pH 6) displayed a good agreement with the models predictions. The maximum sorption capacity, estimated by the Langmuir model, was 107.4 mg/g for Metronidazole and 93.5 mg/g for Sulfamethoxazole.This work was financially supported by the projects POCI-01-0145-FEDER-006939 (LEPABE), POCI-010145-FEDER-007265 (REQUIMTE/LAQV) funded by the European Regional Development Fund (ERDF), through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI) and by national funds, through FCT - Fundação para a Ciência e a Tecnologia (LEPABE - UID/EQU/00511/2013; REQUIMTE/LAQV - UID/QUI/50006/2013) and NORTE-01-0145-FEDER-000005 – LEPABE-2-ECO-INNOVATION, supported by North Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF).info:eu-repo/semantics/publishedVersio

An uncertainty and sensitivity analysis applied to the prioritisation of pharmaceuticals as surface water contaminants from wastewater treatment plant direct emissions

In this study, the concentration probability distributions of 82 pharmaceutical compounds detected in the effluents of 179 European wastewater treatment plants were computed and inserted into a multimedia fate model. The comparative ecotoxicological impact of the direct emission of these compounds from wastewater treatment plants on freshwater ecosystems, based on a potentially affected fraction (PAF) of species approach, was assessed to rank compounds based on priority. As many pharmaceuticals are acids or bases, the multimedia fate model accounts for regressions to estimate pH-dependent fate parameters. An uncertainty analysis was performed by means of Monte Carlo analysis, which included the uncertainty of fate and ecotoxicity model input variables, as well as the spatial variability of landscape characteristics on the European continental scale. Several pharmaceutical compounds were identified as being of greatest concern, including 7 analgesics/anti-inflammatories, 3 β-blockers, 3 psychiatric drugs, and 1 each of 6 other therapeutic classes. The fate and impact modelling relied extensively on estimated data, given that most of these compounds have little or no experimental fate or ecotoxicity data available, as well as a limited reported occurrence in effluents. The contribution of estimated model input variables to the variance of freshwater ecotoxicity impact, as well as the lack of experimental abiotic degradation data for most compounds, helped in establishing priorities for further testing. Generally, the effluent concentration and the ecotoxicity effect factor were the model input variables with the most significant effect on the uncertainty of output results

Accounting for the dissociating properties of organic chemicals in LCIA: an uncertainty analysis applied to micropollutants in the assessment of freshwater ecotoxicity

In life cycle impact assessment (LCIA) models, the sorption of the ionic fraction of dissociating organic chemicals is not adequately modeled because conventional non-polar partitioning models are applied. Therefore, high uncertainties are expected when modeling the mobility, as well as the bioavailability for uptake by exposed biota and degradation, of dissociating organic chemicals. Alternative regressions that account for the ionized fraction of a molecule to estimate fate parameters were applied to the USEtox model. The most sensitive model parameters in the estimation of ecotoxicological characterization factors (CFs) of micropollutants were evaluated by Monte Carlo analysis in both the default USEtox model and the alternative approach. Negligible differences of CFs values and 95% confidence limits between the two approaches were estimated for direct emissions to the freshwater compartment; however the default USEtox model overestimates CFs and the 95% confidence limits of basic compounds up to three orders and four orders of magnitude, respectively, relatively to the alternative approach for emissions to the agricultural soil compartment. For three emission scenarios, LCIA results show that the default USEtox model overestimates freshwater ecotoxicity impacts for the emission scenarios to agricultural soil by one order of magnitude, and larger confidence limits were estimated, relatively to the alternative approach

Electrochemical biosensors for Salmonella: State of the art and challenges in food safety assessment

According to the recent statistics, Salmonella is still an important public health issue in the whole world. Legislated reference methods, based on counting plate methods, are sensitive enough but are inadequate as an effective emergency response tool, and are far from a rapid device, simple to use out of lab. An overview of the commercially available rapid methods for Salmonella detection is provided along with a critical discussion of their limitations, benefits and potential use in a real context. The distinguished potentialities of electrochemical biosensors for the development of rapid devices are highlighted. The state-of-art and the newest technologic approaches in electrochemical biosensors for Salmonella detection are presented and a critical analysis of the literature is made in an attempt to identify the current challenges towards a complete solution for Salmonella detection in microbial food control based on electrochemical biosensors.This work received financial support from the European Union (FEDER funds through COMPETE) and National Funds (FCT, Fundação para a Ciência e Tecnologia) through project UID/QUI/50006/2013. Nádia Silva is gratefully to FCT grant SFRH/BD/112414/2015, financed by POPH–QREN–Tipologia 4.1–Formação Avançada, subsidized by Fundo Social Europeu and Ministério da Ciência, Tecnologia e Ensino Superior.info:eu-repo/semantics/publishedVersio

Anthropogenic contamination of Portuguese coastal waters during the bathing season: Assessment using caffeine as a chemical marker

Bathing water quality standards are based on international standards and legislations. However, in Europe, only the microbiological parameters are to be accomplished. Recent research has focused on chemical indicators that can determine human fecal contaminants in water. Therefore, the suitability of caffeine as a chemical marker of seawater pollution in the north Portuguese coastal area in the Atlantic Ocean during the bathing season was assessed in this study. The quality of water from the coasts of five cities was monitored. 101 seawater samples were collected from 14 beaches, and their water quality was classified as sufficient, good, and excellent. Caffeine was detected in all samples in concentration range of 18 to 525ng/L. The highest average concentration of caffeine was found in seawater samples collected in July from beaches classified as having sufficient water quality, which were located in cities with high population density and high tourist affluence.info:eu-repo/semantics/publishedVersio

A Critical Comparison of the Advanced Extraction Techniques Applied to Obtain Health-Promoting Compounds from Seaweeds

Marine macroalgae are rich in bioactive compounds that can be applied in several fields, mainly food, cosmetics, and medicine. The health-promoting effects of bioactive compounds, such as polyphenols, polysaccharides, carotenoids, proteins, and fatty acids, have been increasingly explored, especially regarding their antioxidant activity and improvement in human health. To extract these valuable compounds, advanced technologies that include Supercritical-Fluid Extraction (SFE), Pressurised-Liquid Extraction (PLE), Ultrasound-Assisted Extraction (UAE), Microwave-Assisted Extraction (MAE), Enzyme-Assisted Extraction (EAE), Ultrasound-Microwave-Assisted Extraction (UMAE) and Liquefied Gas Extraction (LGE) have been assessed due to their notable advantages over the conventional methods (Solid–Liquid and Soxhlet extraction). These advanced techniques are considerably influenced by different extraction parameters such as temperature, pressure, type of solvent, extraction time, solvent:solid material ratio, power (MAE, UAE, and UMAE), enzymes used (EAE), and factors related to the macroalgae matrix itself. Optimizing these process parameters for each method is critical to obtain better efficiency results for the targeted bioactive compounds. Macroalgae are natural sources with undeniable beneficial effects on human health. In this context, optimising the extraction techniques discussed in this review should prioritise exploiting these valuable resources’ wide range of bioactive propertiesThis work was financed by FEDER—Fundo Europeu de Desenvolvimento Regional funds through the COMPETE 2020—Operacional Programme for Competitiveness and Internationalisation (POCI), and by Portuguese funds through FCT—Fundação para a Ciência e a Tecnologia in the framework of the project POCI-01-0145-FEDER-030240—PTDC/OCE-ETA/30240/2017—SilverBrain-From sea to brain: Green neuroprotective extracts for nanoencapsulation and functional food production. This work was supported by projects REQUIMTE/LAQV—UIDB/50006/2020, UIDP/50006/2020, and LA/P/0008/2020 financed by FCT/Ministério da Ciência, Tecnologia e Ensino Superior (MCTES), through national funds, and the project SYSTEMIC, “An integrated approach to the challenge of sustainable food systems: adaptive and mitigatory strategies to address climate change and malnutrition”. The Knowledge hub on Nutrition and Food Security received funding from national research funding parties in Belgium (FWO), France (INRA), Ger-many (BLE), Italy (MIPAAF), Latvia (IZM), Norway (RCN), Portugal (FCT), and Spain (AEI) in a joint action of JPI HDHL, JPI-OCEANS, and FACCE-JPI launched in 2019 under the ERA-NET ERA-HDHL (n° 696295). Clara Grosso (CEECIND/03436/2020) thanks FCT for fundinginfo:eu-repo/semantics/publishedVersio

Development of polyaniline microarray electrodes for cadmium analysis

Disposable screen-printed electrodes (SPCE) were modified using a cosmetic product to partially block the electrode surface in order to obtain a microelectrode array. The microarrays formed were electropolymerized with aniline. Scanning electron microscopy was used to evaluate the modified and polymerized electrode surface. Electrochemical characteristics of the constructed sensor for cadmium analysis were evaluated by cyclic and square-wave voltammetry. Optimized stripping procedure in which the preconcentration of cadmium was achieved by depositing at –1.20 V (vs. Ag/AgCl) resulted in a well defined anodic peak at approximately –0.7 V at pH 4.6. The achieved limit of detection was 4 × 10−9 mol dm−3. Spray modified and polymerized microarray electrodes were successfully applied to quantify cadmium in fish sample digests

Biological potential, gastrointestinal digestion, absorption, and bioavailability of algae-derived compounds with neuroprotective activity: a comprehensive review

Currently, there is no known cure for neurodegenerative disease. However, the available therapies aim to manage some of the symptoms of the disease. Human neurodegenerative diseases are a heterogeneous group of illnesses characterized by progressive loss of neuronal cells and nervous system dysfunction related to several mechanisms such as protein aggregation, neuroinflammation, oxidative stress, and neurotransmission dysfunction. Neuroprotective compounds are essential in the prevention and management of neurodegenerative diseases. This review will focus on the neurodegeneration mechanisms and the compounds (proteins, polyunsaturated fatty acids (PUFAs), polysaccharides, carotenoids, phycobiliproteins, phenolic compounds, among others) present in seaweeds that have shown in vivo and in vitro neuroprotective activity. Additionally, it will cover the recent findings on the neuroprotective effects of bioactive compounds from macroalgae, with a focus on their biological potential and possible mechanism of action, including microbiota modulation. Furthermore, gastrointestinal digestion, absorption, and bioavailability will be discussed. Moreover, the clinical trials using seaweed-based drugs or extracts to treat neurodegenerative disorders will be presented, showing the real potential and limitations that a specific metabolite or extract may have as a new therapeutic agent considering the recent approval of a seaweed-based drug to treat Alzheimer’s disease.info:eu-repo/semantics/publishedVersio