60 research outputs found
Self-shaping of oil droplets via the formation of intermediate rotator phases upon cooling.
Revealing the chemical and physical mechanisms underlying symmetry breaking and shape transformations is key to understanding morphogenesis. If we are to synthesize artificial structures with similar control and complexity to biological systems, we need energy- and material-efficient bottom-up processes to create building blocks of various shapes that can further assemble into hierarchical structures. Lithographic top-down processing allows a high level of structural control in microparticle production but at the expense of limited productivity. Conversely, bottom-up particle syntheses have higher material and energy efficiency, but are more limited in the shapes achievable. Linear hydrocarbons are known to pass through a series of metastable plastic rotator phases before freezing. Here we show that by using appropriate cooling protocols, we can harness these phase transitions to control the deformation of liquid hydrocarbon droplets and then freeze them into solid particles, permanently preserving their shape. Upon cooling, the droplets spontaneously break their shape symmetry several times, morphing through a series of complex regular shapes owing to the internal phase-transition processes. In this way we produce particles including micrometre-sized octahedra, various polygonal platelets, O-shapes, and fibres of submicrometre diameter, which can be selectively frozen into the corresponding solid particles. This mechanism offers insights into achieving complex morphogenesis from a system with a minimal number of molecular components.European Research Council (Grant ID: EMATTER 280078), European networks COST MP 1106 and 1305 and the capacity building project BeyondEverest of the European Commission (Grant ID: 286205)This is the author accepted manuscript. The final version is available from Nature Publishing Group via http://dx.doi.org/10.1038/nature1618
Ethyl cellulose, cellulose acetate and carboxymethyl cellulose microstructures prepared using electrohydrodynamics and green solvents
Cellulose derivatives are an attractive sustainable material used frequently in biomaterials, however their solubility in safe, green solvents is not widely exploited. In this work three cellulose derivatives; ethyl cellulose, cellulose acetate and carboxymethyl cellulose were subjected to electrohydrodynamic processing. All were processed with safe, environmentally friendly solvents; ethanol, acetone and water. Ethyl cellulose was electrospun and an interesting transitional region was identified. The morphological changes from particles with tails to thick fibres were charted from 17 to 25 wt% solutions. The concentration and solvent composition of cellulose acetate (CA) solutions were then changed; increasing the concentration also increased fibre size. At 10 wt% CA, with acetone only, fibres with heavy beading were produced. In an attempt to incorporate water in the binary solvent system to reduce the acetone content, 80:20 acetone/water solvent system was used. It was noted that for the same concentration of CA (10 wt%), the beading was reduced. Finally, carboxymethyl cellulose was electrospun with poly(ethylene oxide), with the molecular weight and polymer compositions changed and the morphology observed
A novel approach to fabricate silk nanofibers containing hydroxyapatite nanoparticles using a three-way stopcock connector
Electrospinning of alumina nanofibers using different precursors
Electrospinning technique is becoming increasingly13; popular for the preparation of nanofibers [1x2013;5]. The13; process involves the application of a strong electrostatic13; field to a capillary connected with a reservoir13; containing a polymer solution or melt. Under the13; influence of the electrostatic field, a pendant droplet of13; the polymer solution at the capillary tip is deformed13; into a conical shape (Taylor cone). If the voltage surpasses13; a threshold value, electrostatic forces overcome13; the surface tension, and a fine charged jet is ejected.13; The jet moves towards a ground plate, which acts as a13; counter electrode. The solvent begins to evaporate13; immediately after the jet is formed. The result is the13; deposition of nanofibers on a substrate located above13; the counter electrode. Initially, this technique was used13; for the preparation of polymer nanofibers [6x2013;9]. In13; recent years; this technique has been used for the13; preparation of metal oxide/ceramic nanofibers such as13; silica, zirconia, titania, nickel oxide, barium titanate,13; lead zirconate titanate and other oxide materials [10x2013;13; 30]. The nanofibers formed could be aligned (parallel13; and cross patterns) when an insulated cylinder attached13; to the axel of a DC motor is used as the substrate [31].13; Xia et al. [32] prepared polymeric and ceramic nanofibers13; as axially aligned arrays by the use of a collector13; consisting of two pieces of electrically conductive13; substrate separated by a gap. Katta et al. used copper13; wires spaced evenly in the form of a circular drum as a13; collector of the electro spun nanofiber
Fabrication of highly porous PMMA electrospun fibers and their application in the removal of phenol and iodine
Morphology Analysis and Characterization of Clinoptilolite/Polyvinylpyrrolidone-Zeolite Composite Nanofibers
The use of an electrostatic lens to enhance the efficiency of the electrospinning process
Electrospun scaffolds manufactured using conventional electrospinning configurations have an intrinsic thickness limitation, due to a charge build-up at the collector. To overcome this limitation, an electrostatic lens has been developed that, at the same relative rate of deposition, focuses the polymer jet onto a smaller area of the collector, resulting in the fabrication of thick scaffolds within a shorter period of time. We also observed that a longer deposition time (up to 13 h, without the intervention of the operator) could be achieved when the electrostatic lens was utilised, compared to 9-10 h with a conventional processing set-up and also showed that fibre fusion was less likely to occur in the modified method. This had a significant impact on the mechanical properties, as the scaffolds obtained with the conventional process had a higher elastic modulus and ultimate stress and strain at short times. However, as the thickness of the scaffolds produced by the conventional electrospinning process increased, a 3-fold decrease in the mechanical properties was observed. This was in contrast to the modified method, which showed a continual increase in mechanical properties, with the properties of the scaffold finally having similar mechanical properties to the scaffolds obtained via the conventional process at longer times. This "focusing" device thus enabled the fabrication of thicker 3-dimensional electrospun scaffolds (of thicknesses up to 3.5 mm), representing an important step towards the production of scaffolds for tissue engineering large defect sites in a multitude of tissues
- …