135 research outputs found
NDT of Composites by Thermography
This paper describes ongoing research efforts to evaluate thermographic techniques for locating flaws or damage in structural fiber composite laminates. An infra-red camera with video isotherm readout is used to identify perturbations in uniform or linear thermal fields which may be caused by presence of flaws or damage such as matrix cracks, delaminations, blind side impact damage, and partial through holes. This procedure has potential for rapid qualitative screening of large surface areas. Potential defective areas may then be analyzed by a more accurate (but more time consuming) method . Two techniques are discussed; externally applied thermal field (EATF) and stress-generated thermal field (SGTF). The EATF technique involves applying heat to a composite structure and observing theresulting transient thermal pattern. The SGTF technique requires stress cycling to create hot spots in regions of high stress concentrations adjacent to flaws or damage sites
A Low Percent Ethanol Method for Immobilizing Planarians
Planarians have recently become a popular model system for the study of adult stem cells, regeneration and polarity. The system is attractive for both undergraduate and graduate research labs, since planarian colonies are low cost and easy to maintain. Also in situ hybridization, immunofluorescence and RNA-interference (RNAi) gene knockdown techniques have been developed for planarian studies. However, imaging of live worms (particularly at high magnifications) is difficult because animals are strongly photophobic; they quickly move away from light sources and out of frame. The current methods available to inhibit movement in planarians include RNAi injection and exposure to cold temperatures. The former is labor and time intensive, while the latter precludes the use of many fluorescent reporter dyes. Here, we report a simple, inexpensive and reversible method to immobilize planarians for live imaging. Our data show that a short 1 hour treatment with 3% ethanol (EtOH) is sufficient to inhibit both the fine and gross movements of Schmidtea mediterranea planarians, of the typical size used (4–6 mm), with full recovery of movement within 3–4 hours. Importantly, EtOH treatment did not interfere with regeneration, even after repeated exposure, nor lyse epithelial cells (as assayed by H&E staining). We demonstrate that a short exposure to a low concentration of EtOH is a quick and effective method of immobilizing planarians, one that is easily adaptable to planarians of all sizes and will increase the accessibility of live imaging assays to planarian researchers
Population structure of the malaria vector Anopheles moucheti in the equatorial forest region of Africa
<p>Abstract</p> <p>Background</p> <p><it>Anopheles moucheti </it>is a major malaria vector in forested areas of Africa. However, despite its important epidemiological role, it remains poorly known and insufficiently studied. Here, levels of genetic differentiation were estimated between different <it>A. moucheti </it>populations sampled throughout its distribution range in Central Africa.</p> <p>Methods</p> <p>Polymorphism at ten microsatellite markers was compared in mosquitoes sampled in Cameroon, the Democratic Republic of Congo and an island on Lake Victoria in Uganda. Microsatellite data were used to estimate genetic diversity within populations, their relative long-term effective population size, and the level of genetic differentiation between them.</p> <p>Results</p> <p>All specimens collected in Tsakalakuku (Democratic Republic of Congo) were identified as <it>A. m. bervoetsi </it>while other samples consisted of <it>A. m. moucheti</it>. Successful amplification was obtained at all microsatellite loci within all <it>A. m. moucheti </it>samples while only six loci amplified in <it>A. m. bervoetsi</it>. Allelic richness and heterozygosity were high for all populations except the island population of Uganda and <it>A. m. bervoetsi</it>. High levels of genetic differentiation were recorded between <it>A. m. bervoetsi </it>and each <it>A. m. moucheti </it>sample as well as between the island population of <it>A. m. moucheti </it>and mainland populations. Significant isolation by distance was evidenced between mainland populations.</p> <p>Conclusion</p> <p>High levels of genetic differentiation supports complete speciation of <it>A. m. bervoetsi </it>which should henceforth be recognized as a full species and named <it>A. bervoetsi</it>. Isolation by distance is the main force driving differentiation between mainland populations of <it>A. m. moucheti</it>. Genetically and geographically isolated populations exist on Lake Victoria islands, which might serve as relevant field sites for evaluation of innovative vector control strategies.</p
Recommended from our members
Advanced Burner Test Reactor Preconceptual Design Report.
The goals of the Global Nuclear Energy Partnership (GNEP) are to expand the use of nuclear energy to meet increasing global energy demand, to address nuclear waste management concerns and to promote non-proliferation. Implementation of the GNEP requires development and demonstration of three major technologies: (1) Light water reactor (LWR) spent fuel separations technologies that will recover transuranics to be recycled for fuel but not separate plutonium from other transuranics, thereby providing proliferation-resistance; (2) Advanced Burner Reactors (ABRs) based on a fast spectrum that transmute the recycled transuranics to produce energy while also reducing the long term radiotoxicity and decay heat loading in the repository; and (3) Fast reactor fuel recycling technologies to recover and refabricate the transuranics for repeated recycling in the fast reactor system. The primary mission of the ABR Program is to demonstrate the transmutation of transuranics recovered from the LWR spent fuel, and hence the benefits of the fuel cycle closure to nuclear waste management. The transmutation, or burning of the transuranics is accomplished by fissioning and this is most effectively done in a fast spectrum. In the thermal spectrum of commercial LWRs, some transuranics capture neutrons and become even heavier transuranics rather than being fissioned. Even with repeated recycling, only about 30% can be transmuted, which is an intrinsic limitation of all thermal spectrum reactors. Only in a fast spectrum can all transuranics be effectively fissioned to eliminate their long-term radiotoxicity and decay heat. The Advanced Burner Test Reactor (ABTR) is the first step in demonstrating the transmutation technologies. It directly supports development of a prototype full-scale Advanced Burner Reactor, which would be followed by commercial deployment of ABRs. The primary objectives of the ABTR are: (1) To demonstrate reactor-based transmutation of transuranics as part of an advanced fuel cycle; (2) To qualify the transuranics-containing fuels and advanced structural materials needed for a full-scale ABR; and (3) To support the research, development and demonstration required for certification of an ABR standard design by the U.S. Nuclear Regulatory Commission. The ABTR should also address the following additional objectives: (1) To incorporate and demonstrate innovative design concepts and features that may lead to significant improvements in cost, safety, efficiency, reliability, or other favorable characteristics that could promote public acceptance and future private sector investment in ABRs; (2) To demonstrate improved technologies for safeguards and security; and (3) To support development of the U.S. infrastructure for design, fabrication and construction, testing and deployment of systems, structures and components for the ABRs. Based on these objectives, a pre-conceptual design of a 250 MWt ABTR has been developed; it is documented in this report. In addition to meeting the primary and additional objectives listed above, the lessons learned from fast reactor programs in the U.S. and worldwide and the operating experience of more than a dozen fast reactors around the world, in particular the Experimental Breeder Reactor-II have been incorporated into the design of the ABTR to the extent possible
Acetate Causes Alcohol Hangover Headache in Rats
Background: The mechanism of veisalgia cephalgia or hangover headache is unknown. Despite a lack of mechanistic studies, there are a number of theories positing congeners, dehydration, or the ethanol metabolite acetaldehyde as causes of hangover headache. Methods: We used a chronic headache model to examine how pure ethanol produces increased sensitivity for nociceptive behaviors in normally hydrated rats. Results: Ethanol initially decreased sensitivity to mechanical stimuli on the face (analgesia), followed 4 to 6 hours later by inflammatory pain. Inhibiting alcohol dehydrogenase extended the analgesia whereas inhibiting aldehyde dehydrogenase decreased analgesia. Neither treatment had nociceptive effects. Direct administration of acetate increased nociceptive behaviors suggesting that acetate, not acetaldehyde, accumulation results in hangover-like hypersensitivity in our model. Since adenosine accumulation is a result of acetate formation, we administered an adenosine antagonist that blocked hypersensitivity. Discussion: Our study shows that acetate contributes to hangover headache. These findings provide insight into the mechanism of hangover headache and the mechanism of headache induction
Identifying an indoor air exposure limit for formaldehyde considering both irritation and cancer hazards
Formaldehyde is a well-studied chemical and effects from inhalation exposures have been extensively characterized in numerous controlled studies with human volunteers, including asthmatics and other sensitive individuals, which provide a rich database on exposure concentrations that can reliably produce the symptoms of sensory irritation. Although individuals can differ in their sensitivity to odor and eye irritation, the majority of authoritative reviews of the formaldehyde literature have concluded that an air concentration of 0.3 ppm will provide protection from eye irritation for virtually everyone. A weight of evidence-based formaldehyde exposure limit of 0.1 ppm (100 ppb) is recommended as an indoor air level for all individuals for odor detection and sensory irritation. It has recently been suggested by the International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP), and the US Environmental Protection Agency (US EPA) that formaldehyde is causally associated with nasopharyngeal cancer (NPC) and leukemia. This has led US EPA to conclude that irritation is not the most sensitive toxic endpoint and that carcinogenicity should dictate how to establish exposure limits for formaldehyde. In this review, a number of lines of reasoning and substantial scientific evidence are described and discussed, which leads to a conclusion that neither point of contact nor systemic effects of any type, including NPC or leukemia, are causally associated with exposure to formaldehyde. This conclusion supports the view that the equivocal epidemiology studies that suggest otherwise are almost certainly flawed by identified or yet to be unidentified confounding variables. Thus, this assessment concludes that a formaldehyde indoor air limit of 0.1 ppm should protect even particularly susceptible individuals from both irritation effects and any potential cancer hazard
NDT of Composites by Thermography
This paper describes ongoing research efforts to evaluate thermographic techniques for locating flaws or damage in structural fiber composite laminates. An infra-red camera with video isotherm readout is used to identify perturbations in uniform or linear thermal fields which may be caused by presence of flaws or damage such as matrix cracks, delaminations, blind side impact damage, and partial through holes. This procedure has potential for rapid qualitative screening of large surface areas. Potential defective areas may then be analyzed by a more accurate (but more time consuming) method . Two techniques are discussed; externally applied thermal field (EATF) and stress-generated thermal field (SGTF). The EATF technique involves applying heat to a composite structure and observing theresulting transient thermal pattern. The SGTF technique requires stress cycling to create hot spots in regions of high stress concentrations adjacent to flaws or damage sites.</p
NDT of Composites by Thermography
This paper describes ongoing research efforts to evaluate thermographic techniques for locating flaws or damage in structural fiber composite laminates. An infra-red camera with video isotherm readout is used to identify perturbations in uniform or linear thermal fields which may be caused by presence of flaws or damage such as matrix cracks, delaminations, blind side impact damage, and partial through holes. This procedure has potential for rapid qualitative screening of large surface areas. Potential defective areas may then be analyzed by a more accurate (but more time consuming) method . Two techniques are discussed; externally applied thermal field (EATF) and stress-generated thermal field (SGTF). The EATF technique involves applying heat to a composite structure and observing theresulting transient thermal pattern. The SGTF technique requires stress cycling to create hot spots in regions of high stress concentrations adjacent to flaws or damage sites.</p
- …