Environmental and economic assessment of sustainability in Mediterranean wheat production

ArticleThis study proposes the application of the Life Cycle Assessment (LCA) and economic evaluations conducted on different cereal production systems in semi-arid environments. Two different crop management systems of durum wheat were analysed by distinguishing Continuous Cropping (CC) and Crop Rotation (CR) with vetch, that are conducted through two different levels of crop intensification (in terms of tillage and fertilization strategies): Conventional (Conv) and Conservative (Cons). The resulting four scenarios were examined using LCA methodology to assess the environmental impacts, and the Production Cost (PC) analysis to estimate the economic results. Overall, the findings of this research provide an opportunity to identify sustainable crops management strategies

The assessment of hazelnut mechanical harvesting productivity

ArticleHazelnut cultivation represents a new opportunity for Calabrian mountainous and sloping areas (Southern Italy), where no alternative fruit crops, except forestry, could be settled. In this Region, hazelnut production doubled during the last fifty years, inciting the farmers to introduce mechanization in cropping practices such as harvesting in order to increase productivity and decrease production costs. Indeed, harvesting is currently one of the most expensive processes of the productive cycle, moreover to be time consuming if carried out manually. Mechanization degree depends significantly on the terrain topography: in sloping areas, rakes are often associated to aspirating machines to harvest the fallen fruit, while the employment of harvesting machines from the ground prevails in flat areas. In this context, the present paper aims to assess technical and economic aspects of harvesting operation, using a harvester from the ground model ‘Jolly 2800’ (GF s.r.l., Italy). Particularly, for technical purposes data about operational working time as well as working productivity were collected according to CIOSTA requirements, in two harvesting sites, whereas, for mechanical harvesting economic evaluation, an estimation model was applied to calculate machinery cost per hour. Moreover, the cost per kg of hazelnut in shell and the average cost per hectare were estimated also. The obtained results show a working productivity of 0.065 ha h-1 op-1 in the first harvesting site, while it was equal to 0.022 ha h -1 op-1 in the second one. Concerning the average cost per hectare, the second harvesting site showed the worst economic performances, with 550.76 € ha-1 against 182.54 € ha-1 obtained in the first one

Gene/longevity association studies at four autosomal loci (REN, THO, PARP, SOD2)

The possibility that four loci (REN, THO, PARP, SOD2) are associated with longevity was explored by comparing the genotypic pools of subjects older than 100 years with those of younger subjects matched for sex and geographic area (northern and southern Italy). The markers (all located within the respective gene) were HUMREN4; HUMTHO1; HUMPARP (gt)845nt; SOD2(C/T)401nt. In order to reduce the number of genotypes, multiallelic polymorphisms were recoded as diallelic according to allele size and frequency patterns (small: S, and large: L, alleles). A significant loss of LL homozygous genotypes was found at the THO locus in male but not in female centenarians with respect to matched controls. On the other hand no significant difference was found between case/control genotypic frequencies at REN, PARP, SOD2 loci. The latter loci therefore do not affect inter-individual variability in life expectancy (at least in terms of qualitative variants associated with the tested markers). However, the data is consistent with an association between the THO locus and longevity

Role of chaos for the validity of statistical mechanics laws: diffusion and conduction

Several years after the pioneering work by Fermi Pasta and Ulam, fundamental questions about the link between dynamical and statistical properties remain still open in modern statistical mechanics. Particularly controversial is the role of deterministic chaos for the validity and consistency of statistical approaches. This contribution reexamines such a debated issue taking inspiration from the problem of diffusion and heat conduction in deterministic systems. Is microscopic chaos a necessary ingredient to observe such macroscopic phenomena?Comment: Latex, 27 pages, 10 eps-figures. Proceedings of the Conference "FPU 50 years since" Rome 7-8 May 200

Search for pair production of boosted Higgs bosons via vector-boson fusion in the bb¯bb¯ final state using pp collisions at √s = 13 TeV with the ATLAS detector

A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at √s = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, K2V . This study constrains K2V to 0.55 < K2V < 1.49 at the 95% confidence level. The value K2V = 0 is excluded with a significance of 3.8 standard deviations with other Higgs boson couplings fixed to their Standard Model values. A search for new heavy spin-0 resonances that would mediate Higgs boson pair production via vector-boson fusion is carried out in the mass range of 1–5 TeV for the first time under several model and decay-width assumptions. No significant deviation from the Standard Model hypothesis is observed and exclusion limits at the 95% confidence level are derived

Combination of searches for heavy spin-1 resonances using 139 fb−1 of proton-proton collision data at √s = 13 TeV with the ATLAS detector

A combination of searches for new heavy spin-1 resonances decaying into diferent pairings of W, Z, or Higgs bosons, as well as directly into leptons or quarks, is presented. The data sample used corresponds to 139 fb−1 of proton-proton collisions at √s = 13 TeV collected during 2015–2018 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting quark pairs (qq, bb, tt¯, and tb) or third-generation leptons (τν and τ τ ) are included in this kind of combination for the frst time. A simplifed model predicting a spin-1 heavy vector-boson triplet is used. Cross-section limits are set at the 95% confdence level and are compared with predictions for the benchmark model. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The complementarity of the various analyses increases the sensitivity to new physics, and the resulting constraints are stronger than those from any individual analysis considered. The data exclude a heavy vector-boson triplet with mass below 5.8 TeV in a weakly coupled scenario, below 4.4 TeV in a strongly coupled scenario, and up to 1.5 TeV in the case of production via vector-boson fusion

The ATLAS trigger system for LHC Run 3 and trigger performance in 2022

The ATLAS trigger system is a crucial component of the ATLAS experiment at the LHC. It is responsible for selecting events in line with the ATLAS physics programme. This paper presents an overview of the changes to the trigger and data acquisition system during the second long shutdown of the LHC, and shows the performance of the trigger system and its components in the proton-proton collisions during the 2022 commissioning period as well as its expected performance in proton-proton and heavy-ion collisions for the remainder of the third LHC data-taking period (2022–2025)

Observation of quantum entanglement with top quarks at the ATLAS detector

Entanglement is a key feature of quantum mechanics with applications in fields such as metrology, cryptography, quantum information and quantum computation. It has been observed in a wide variety of systems and length scales, ranging from the microscopic to the macroscopic. However, entanglement remains largely unexplored at the highest accessible energy scales. Here we report the highest-energy observation of entanglement, in top–antitop quark events produced at the Large Hadron Collider, using a proton–proton collision dataset with a centre-of-mass energy of √s = 13 TeV and an integrated luminosity of 140 inverse femtobarns (fb)−1 recorded with the ATLAS experiment. Spin entanglement is detected from the measurement of a single observable D, inferred from the angle between the charged leptons in their parent top- and antitop-quark rest frames. The observable is measured in a narrow interval around the top–antitop quark production threshold, at which the entanglement detection is expected to be significant. It is reported in a fiducial phase space defined with stable particles to minimize the uncertainties that stem from the limitations of the Monte Carlo event generators and the parton shower model in modelling top-quark pair production. The entanglement marker is measured to be D = −0.537 ± 0.002 (stat.) ± 0.019 (syst.) for 340 GeV < mtt < 380 GeV. The observed result is more than five standard deviations from a scenario without entanglement and hence constitutes the first observation of entanglement in a pair of quarks and the highest-energy observation of entanglement so far

Measurements of the production cross-section for a Z boson in association with b- or c-jets in proton–proton collisions at √s = 13 TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with bor c-jets, in proton–proton collisions at √s = 13 TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 fb−1. Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum pT > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected Z+ ≥ 1 c-jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions

Measurement of diferential cross-sections in tt¯ and tt¯+jets production in the lepton+jets fnal state in pp collisions at √s = 13 TeV using 140 fb−1 of ATLAS data

Diferential cross-sections for top-quark pair production, inclusively and in association with jets, are measured in pp collisions at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC using an integrated luminosity of 140 fb−1. The events are selected with one charged lepton (electron or muon) and at least four jets. The differential cross-sections are presented at particle level as functions of several jet observables, including angular correlations, jet transverse momenta and invariant masses of the jets in the final state, which characterise the kinematics and dynamics of the top-antitop system and the hard QCD radiation in the system with associated jets. The typical precision is 5%–15% for the absolute differential cross-sections and 2%–4% for the normalised differential cross-sections. Next-to-leading-order and next-to-next-to-leading-order QCD predictions are found to provide an adequate description of the rate and shape of the jet-angular observables. The description of the transverse momentum and invariant mass observables is improved when next-to-next-to-leading-order QCD corrections are included