3 research outputs found
Recommended from our members
Development of Functionally Graded Materials for Manufacturing Tools and Dies and Industrial Processing Equipment
Hot forming processes such as forging, die casting and glass forming require tooling that is subjected to high temperatures during the manufacturing of components. Current tooling is adversely affected by prolonged exposure at high temperatures. Initial studies were conducted to determine the root cause of tool failures in a number of applications. Results show that tool failures vary and depend on the operating environment under which they are used. Major root cause failures include (1) thermal softening, (2) fatigue and (3) tool erosion, all of which are affected by process boundary conditions such as lubrication, cooling, process speed, etc. While thermal management is a key to addressing tooling failures, it was clear that new tooling materials with superior high temperature strength could provide improved manufacturing efficiencies. These efficiencies are based on the use of functionally graded materials (FGM), a new subset of hybrid tools with customizable properties that can be fabricated using advanced powder metallurgy manufacturing technologies. Modeling studies of the various hot forming processes helped identify the effect of key variables such as stress, temperature and cooling rate and aid in the selection of tooling materials for specific applications. To address the problem of high temperature strength, several advanced powder metallurgy nickel and cobalt based alloys were selected for evaluation. These materials were manufactured into tooling using two relatively new consolidation processes. One process involved laser powder deposition (LPD) and the second involved a solid state dynamic powder consolidation (SSDPC) process. These processes made possible functionally graded materials (FGM) that resulted in shaped tooling that was monolithic, bi-metallic or substrate coated. Manufacturing of tooling with these processes was determined to be robust and consistent for a variety of materials. Prototype and production testing of FGM tooling showed the benefits of the nickel and cobalt based powder metallurgy alloys in a number of applications evaluated. Improvements in tool life ranged from three (3) to twenty (20) or more times than currently used tooling. Improvements were most dramatic where tool softening and deformation were the major cause of tool failures in hot/warm forging applications. Significant improvement was also noted in erosion of aluminum die casting tooling. Cost and energy savings can be realized as a result of increased tooling life, increased productivity and a reduction in scrap because of improved dimensional controls. Although LPD and SSDPC tooling usually have higher acquisition costs, net tooling costs per component produced drops dramatically with superior tool performance. Less energy is used to manufacture the tooling because fewer tools are required and less recycling of used tools are needed for the hot forming process. Energy is saved during the component manufacturing cycle because more parts can be produced in shorter periods of time. Energy is also saved by minimizing heating furnace idling time because of less downtime for tooling changes
Bond coat assisted enhancement in microstructural, mechanical and corrosion behavior of AZ91 magnesium alloy cold spray coated with aluminum alloys
Cold spray coating technique was used to deposit coatings of AA6061 aluminum alloy on AZ91 magnesium alloy substrates. A bond coat of commercially pure aluminum was used to facilitate deposition of the AA6061 powders. Two cold spray coating iterations were conducted to optimize the coating’s microstructural features such as porosity, surface roughness, and interface microstructure. Mechanical properties such as hardness, wear resistance, and adhesion behavior were characterized and used as metrics to compare the coatings with the substrate. The corrosion behavior of the coated and uncoated samples was characterized using multiscale and multimodal corrosion measurements comprising macroscopic potentiodynamic polarization and scanning electrochemical cell microscopy. The coated substrates exhibited a significant improvement in mechanical and corrosion performance as compared to the uncoated substrate