Treatment of chronically unreduced complex dislocations of the elbow

Chronic dislocation of the elbow is an exceedingly disabling condition associated with severe instability, limitation of elbow function and significant pain. Due to the potentially conflicting goals of restoring elbow stability and regaining a satisfactory arc of motion, successful treatment is a challenge for the experienced trauma surgeon. We report our treatment strategy in three patients suffering from chronically unreduced fracture-dislocations of the elbow. The treatment protocol consists of in situ neurolysis of the ulnar nerve, distraction and reduction of the joint using unilateral hinged external fixation and repair of the osseous stabilizers. A stable elbow was achieved in all patients, without the need of reconstruction of the collateral ligaments. At final follow-up, the average extension/flexion arc of motion was 107° (range, from 100° to 110°). The average MEPI score at follow-up was 93, and the average DASH score was 19. This is a promising treatment protocol for the treatment of chronically unreduced complex elbow dislocations to restore elbow stability and regain an excellent functional outcome

Dislocation Following Total Hip Replacement

Background: Hip replacement ranks among the more successful operations on the musculoskeletal system, but it can have serious complications. A common one is dislocation of the total hip endoprosthesis, an event that arises in about 2% of patients within 1 year of the operation. Physicians should be aware of how this problem can be prevented and, if necessary, treated, so that the degree of trauma due to hip dislocation after hip replacement surgery can be kept to a minimum. Methods: The authors searched Medline selectively for pertinent publications and analyzed the annual reports of international endoprosthesis registries. Results: The rate of dislocation of primary hip replacements ranges from 0.2% to 10% per year, while that of artificial hip joints that have already been surgically revised can be as high as 28%, depending on the patient population, the follow-up interval, and the type of prosthesis. Patient-specific risk factors for displacement of a hip endoprosthesis include advanced age, accompanying neurologic disease, and impaired compliance. Patients should scrupulously avoid hip movements such as bending far forward from a standing position, or internal rotation of the flexed hip. Operation-specific risk factors include suboptimal implant position, insufficient soft-tissue tension, and inadequate experience of the surgeon. Conservative treatment is justified the first time dislocation occurs without any identifiable cause. If a mechanical cause of instability is found, then operative revision should be performed as recommended in a standardized treatment algorithm, because, otherwise, dislocation is likely to recur. Conclusions: The dislocation of a total hip endoprosthesis is an emotionally traumatizing event that should be prevented if possible. Preoperative risk assessment should be performed and the operation should be performed with optimal technique, including the best possible physical configuration of implant components, soft-tissue balance, and an adequately experienced orthopedic surgeon

No benefit of autologous transfusion drains in total knee arthroplasty

Autologous blood transfusion drains are commonly used to reduce allogeneic blood transfusion rate after total knee arthroplasty. There is conflicting evidence as to whether autologous transfusion drains (ABT drains) were effective when restrictive transfusion triggers were used. The aim of our study was to ascertain where, as a part of a blood management protocol, autologous blood transfusion drains reduce the allogeneic blood transfusion rate after total knee arthroplasty. Two-hundred total knee arthroplasty patients were included in the prospective randomized controlled study. After implantation, a Redon drain without vacuum assistance (control, n = 100) or an autologous blood transfusion drain (ABT group, n = 100) was used. Demographic and operative data were collected. The blood loss, total blood loss, blood values and transfusion rate were documented. The blood loss in the drains was significantly increased for the ABT group (409 vs. 297 ml, p < 0.001). There was a non-significant trend towards a higher total blood loss for ABT patients (1844 vs. 1685 ml, n.s.). The allogeneic blood transfusion rate was similar for both groups (8 vs. 9%, n.s.). Similarly, the number of transfused blood units was comparable between both groups (0.2U/patient vs. 0.17U/patient n.s.). In combination with restrictive blood transfusion triggers, ABT drains had no positive effect on the allogeneic blood transfusion rate. The blood loss in ABT drains was higher. As a consequence, the use of ABT drains was discontinued. I

Low Short-Stem Revision Rates: 1-11 Year Results From 1888 Total Hip Arthroplasties

Background: In total hip arthroplasty, short stems were developed as a bone-conserving alternative to traditional cementless stems. So far, there have been very few recorded medium to long-term results of these comparatively new implants. The aim of our retrospective study was to report on the survival of calcar-loading short stems. Methods: All Metha stem implantations from 2004 to 2014 were recorded from the operation protocols (n = 1888). Due to the chronological development of the stem, 3 different versions were implanted: modular titanium stems with neck adapters from titanium or cobalt-chrome and monoblock stems. Patients were questioned by post about revision, dislocation, and satisfaction. Results: Data were complete for 93% of the procedures (1090 monoblock stems, 314 modular stems with titanium neck, and 230 modular stems with cobalt chrome neck). Mean follow-up was 6 years (1-11 years). Fifteen modular titanium implants were affected by cone fractures (4%). Therefore, monoblock, modular cobalt chrome, and modular titanium implants were analyzed separately. The 7-year revision rate for monoblock stems was 1.5%; for modular cobalt-chrome stems it was 1.8%, and for modular titanium stems it was 5.3%. Conclusion: Our data show the midterm survival of the monoblock and modular cobalt-chrome implants equivalent to the traditional cementless stems. These might, therefore, be considered as a bone-conserving alternative for young and active patients. (C) 2016 Elsevier Inc. All rights reserved

Calibration Marker Position in Digital Templating of Total Hip Arthroplasty

Background: We report a mathematical method to assess the vertical and horizontal positions of spherical radiopaque objects of known size in conventional radiographs. Methods: The reliability and validity of the method were tested in an experimental setting and applied to 100 anteroposterior pelvic radiographs with external calibration markers and unilateral total hip arthroplasty (THA). Results: We found excellent reliabilities; intraclass correlation coefficients for interobserver and intra-observer reliabilities were 0.999-1.000 (P = .000). The mean normal height of THA was 198 mm (range: 142-243 mm, standard deviation: 18 mm) above the detector. Vertical and horizontal external marker positions differed significantly from the true hip center (THA; P < .001 and P = .017). Conclusion: This method could enhance patient safety by enabling automated detection of malpositioned calibration markers by templating software. (C) 2016 Elsevier Inc. All rights reserved

Agreement Between Proximal Femoral Geometry and Component Design in Total Hip Arthroplasty: Implications for Implant Choice

Background: The present study aimed to analyze the agreement between proximal femoral geometry of adult hips and femoral component design in total hip arthroplasty. Methods: Anatomical femoral offset (FOAnat) and the anatomical neck-shaft angle (NSA(Anat)) of 800 adult hips were measured by computed tomography scans, and anatomical femoral neck height (FHAnat) was calculated. Corresponding best-fit implants of the most common hip system (standard, high offset and varus variant) were identified for each hip. Finally, the precision of the best possible anatomic reconstruction was assessed. Results: The mean FOAnat was 38.0 mm (range: 19.8-57.9 mm, standard deviation [SD]: 6.4 mm), the mean NSA(Anat) was 130.8 degrees (range: 107.1 degrees-151.9 degrees; SD: 6.5 degrees), and the mean FHAnat was 32.6 mm (range: 14.4-52.0 mm; SD: 5.5 mm). In 450 (56.3%) hips, the standard variant was identified to be the best-fit implant, followed by the varus (n = 282, 35.3%) and the high offset (n = 68, 8.5%) variants. The mean minimal distance from the best-fit implant was 4.5 mm (range: 0.1-20.2 mm, SD: 3.4 mm). Excellent agreement (distance: = 6 mm). Conclusion: The present study revealed a mismatch between proximal femoral anatomy of a relevant proportion of adult hips and implant geometry of the most common femoral component in total hip arthroplasty. (C) 2016 Elsevier Inc. All rights reserved