An Experimental Approach for the Determination of the Mechanical Properties of Base-Excited Polymeric Specimens at Higher Frequency Modes

Structures made of the thermoplastic polymer polyether ether ketone (PEEK) are widely used in dynamically-loaded applications due to their high-temperature resistance and high mechanical properties. To design these dynamic applications, in addition to the well-known stiffness and strength properties the vibration-damping properties at the given frequencies are required. Depending on the application, frequencies from a few hertz to the ultrasonic range are of interest here. To characterize the frequency-dependent behavior, an experimental approach was chosen and applied to a sample polymer PEEK. The test setup consists of a piezoelectrically driven base excitation of the polymeric specimen and the non-contact measurement of the velocity as well as the surface temperature. The beam’s bending vibrations were analyzed by means of the Timoshenko theory to determine the polymer’s storage modulus. The mechanical loss factor was calculated using the half-power bandwidth method. For PEEK and a considered frequency range of 1 kHz to 16 kHz, a storage modulus between 3.9 GPa and 4.2 GPa and a loss factor between 9 103 and 17 103 were determined. For the used experimental parameters, the resulting mechanical properties were not essentially influenced by the amplitude of excitation, the duration of excitation, or thermal degrad.ation due to self-heating, but rather slightly by the clamping force within the fixation area

Functional Design Employing Miniaturized Electronics with Wireless Signal Provision to a Smartphone for a Strain-Based Measuring System for Ski Poles

The individual monitoring of cross-country skiers’ technique-related parameters is crucial to identifying possible athlete-individual deficits that need to be corrected in order to optimize the athlete’s performance in competition. To be able to record relevant biomechanical parameters during training in the field, the development of measuring systems exploiting the athlete’s full potential is the key. Known mobile monitoring systems for measuring forces on ski poles use comparably heavy uniaxial load cells mounted on the pole with a data logger also attached to the pole or carried by the athlete. Measurements that are more accurate can be acquired using wire-based systems. However, wire-based systems are highly immobile and only usable when the athletes undergo a stationary test, e.g., on a treadmill. This paper focuses on the functional design of a measuring system using specialized, miniaturized electronics for acquiring data from strain sensors. These data are then used to determine the technique-related parameters pole force and angle of bend. The functional design is also capable of transmitting the acquired data wirelessly via Bluetooth to a smartphone that runs a proprietary app. This approach is advantageous regarding mass, dynamic behavior, analyzing functionality, and signal processing compared to the state of the art

Sound Transmission Loss of a Sandwich Plate with Adjustable Core Layer Thickness

Compressible Constrained Layer Damping (CCLD) is a novel, semi-active, lightweightcompatible solution for vibration mitigation based on the well-known constrained layer damping principle. The sandwich-like CCLD set-up consists of a base structure, a constraining plate, and a compressible open-cell foam core in between, enabling the adjustment of the structure’s vibration behaviour by changing the core compression using different actuation pressures. The aim of the contribution is to show to what degree, and in which frequency range the acoustic behaviour can be tuned using CCLD. Therefore, the sound transmission loss (TL), as an important vibro-acoustic index, is determined in an acoustic window test stand at different actuation pressures covering a frequency range from 0.5 to 5 kHz. The different actuation pressures applied cause a variation of the core layer thickness (from 0.9 d₀ to 0.3 d₀), but the resulting changes of the stiffness and damping of the overall structure have no significant influence on the TL up to approximately 1 kHz for the analysed CCLD design. Between 1 kHz and 5 kHz, however, the TL can be influenced considerably well by the actuation pressure applied, due to a damping-dominated behaviour around the critical frequenc

Material Selection Process for Acoustic and Vibration Applications Using the Example of a Plate Resonator

In this work, a new method for selecting suitable materials is presented. This method has a high potential for a variety of engineering applications, such as the design of sound-absorbing and vibration-loaded structures, where a large number of different requirements have to be met. The method is based on the derivation of functional dependencies of selected material parameters. These dependencies can be used in parameter studies to consider parameter combinations that lie in the range of real existing and targeted material groups. This allows the parameter space to be reduced, the calculation to be accelerated, and suitable materials to be (pre-)selected for the respective application, which contributes to a more target-oriented design. The method is applied to the example of a plate resonator. For this purpose, a semi-analytical model is implemented to calculate the transmission loss as well as the reflected and dissipated sound power of plate silencers, taking into account the influence of flow velocity and fluid temperature on the performance of plate silencers.DFG, 416814415, Bauweisenentwicklung und Technologiesynthese zur Fertigung zellularer Kunststoffhybridstrukturen für den Einsatz in SchalldämpfernDFG, 416728326, Modellierung und Berechnung von Plattenresonator-SchalldämpfernBMWK, 20E1915B, Modellierung und Optimierung der akustischen Wirksamkeit von Linern mit flexiblen StrukturenBMWK, 20E1915C, Untersuchung von neuartigen geometrieangepassten Schallabsorbern aus neuartigen Kunststoffen für Luftfahrtapplikatione

Combining teaching and research: a BIP on geophysical and archaeological prospection of North Frisian medieval settlement patterns

We performed a research-oriented EU Erasmus+ Blended Intensive Program (BIP) with participants from four countries focused on North Frisian terp settlements from Roman Iron Age and medieval times. We show that the complex terp structure and environment can be efficiently prospected using combined magnetic and EMI mapping, and seismic and geoelectric profiling and drilling. We found evidence of multiple terp phases and a harbor at the Roman Iron Age terp of Tofting. In contrast, the medieval terp of Stolthusen is more simply constructed, probably uni-phase. The BIP proved to be a suitable tool for high-level hands-on education adding value to the research conducted in on-going projects

The complete genome sequence of a Neandertal from the Altai Mountains

We present a high-quality genome sequence of a Neandertal woman from Siberia. We show that her parents were related at the level of half siblings and that mating among close relatives was common among her recent ancestors. We also sequenced the genome of a Neandertal from the Caucasus to low coverage. An analysis of the relationships and population history of available archaic genomes and 25 present-day human genomes shows that several gene flow events occurred among Neandertals, Denisovans and early modern humans, possibly including gene flow into Denisovans from an unknown archaic group. Thus, interbreeding, albeit of low magnitude, occurred among many hominin groups in the Late Pleistocene. In addition, the high quality Neandertal genome allows us to establish a definitive list of substitutions that became fixed in modern humans after their separation from the ancestors of Neandertals and Denisovans

Observation of hard scattering in photoproduction events with a large rapidity gap at HERA

Events with a large rapidity gap and total transverse energy greater than 5 GeV have been observed in quasi-real photoproduction at HERA with the ZEUS detector. The distribution of these events as a function of the $\gamma p$ centre of mass energy is consistent with diffractive scattering. For total transverse energies above 12 GeV, the hadronic final states show predominantly a two-jet structure with each jet having a transverse energy greater than 4 GeV. For the two-jet events, little energy flow is found outside the jets. This observation is consistent with the hard scattering of a quasi-real photon with a colourless object in the proton.Comment: 19 pages, latex, 4 figures appended as uuencoded fil

Measurement of the diffractive structure function in deep inelastic scattering at HERA

This paper presents an analysis of the inclusive properties of diffractive deep inelastic scattering events produced in $ep$ interactions at HERA. The events are characterised by a rapidity gap between the outgoing proton system and the remaining hadronic system. Inclusive distributions are presented and compared with Monte Carlo models for diffractive processes. The data are consistent with models where the pomeron structure function has a hard and a soft contribution. The diffractive structure function is measured as a function of \xpom, the momentum fraction lost by the proton, of $\beta$, the momentum fraction of the struck quark with respect to \xpom, and of $Q^2$. The \xpom dependence is consistent with the form \xpoma where $a~=~1.30~\pm~0.08~(stat)~^{+~0.08}_{-~0.14}~(sys)$ in all bins of $\beta$ and $Q^2$. In the measured $Q^2$ range, the diffractive structure function approximately scales with $Q^2$ at fixed $\beta$. In an Ingelman-Schlein type model, where commonly used pomeron flux factor normalisations are assumed, it is found that the quarks within the pomeron do not saturate the momentum sum rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil

Selection-Independent Generation of Gene Knockout Mouse Embryonic Stem Cells Using Zinc-Finger Nucleases

Gene knockout in murine embryonic stem cells (ESCs) has been an invaluable tool to study gene function in vitro or to generate animal models with altered phenotypes. Gene targeting using standard techniques, however, is rather inefficient and typically does not exceed frequencies of 10−6. In consequence, the usage of complex positive/negative selection strategies to isolate targeted clones has been necessary. Here, we present a rapid single-step approach to generate a gene knockout in mouse ESCs using engineered zinc-finger nucleases (ZFNs). Upon transient expression of ZFNs, the target gene is cleaved by the designer nucleases and then repaired by non-homologous end-joining, an error-prone DNA repair process that introduces insertions/deletions at the break site and therefore leads to functional null mutations. To explore and quantify the potential of ZFNs to generate a gene knockout in pluripotent stem cells, we generated a mouse ESC line containing an X-chromosomally integrated EGFP marker gene. Applying optimized conditions, the EGFP locus was disrupted in up to 8% of ESCs after transfection of the ZFN expression vectors, thus obviating the need of selection markers to identify targeted cells, which may impede or complicate downstream applications. Both activity and ZFN-associated cytotoxicity was dependent on vector dose and the architecture of the nuclease domain. Importantly, teratoma formation assays of selected ESC clones confirmed that ZFN-treated ESCs maintained pluripotency. In conclusion, the described ZFN-based approach represents a fast strategy for generating gene knockouts in ESCs in a selection-independent fashion that should be easily transferrable to other pluripotent stem cells