Vibrational analysis of d-PCL(530)/siloxane based hybrids doped with two lithium salts

Published online: 22 May 2013The present study has been focused on environmentally friendly sol-gel derived electrolytes based on a di-urethane cross-linked d-PCL(530)/siloxane network (where d represents di, PCL identifies the poly(ε–caprolactone) biopolymer and 530 is the average molecular weight in g.mol-1) doped with a wide range of concentration of lithium perchlorate (LiClO4) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Fourier Transform Infrared and Raman (FT-IR and FT-Raman, respectively) spectroscopies have been applied to evaluate the extent of ionic association. Characteristic bands of the PCL(530) segments, of the urethane cross-links and of the anions have been examined to gain insight into the cation/biopolymer, cation/anion and cation/cross-link interactions. In both electrolyte systems “free” ions and contact ions have been identified. The addition of salt modifies the hydrogen-bonded array of the host matrix, causing the destruction/formation of the urethane/urethane aggregates.Fundação para a Ciência e a Tecnologia (FCT

All sol-gel electrochromic smart windows: CeO2-TiO 2/Ormolyte/WO3

A solid state system having the configuration WO 3/Ormolyte/CeO2-TiO2 has been assembled. Syntheses routes for tungsten oxide WO3, and cerium-titanium CeO 2-TiO2 oxide sols, were developed. A novel solid electrolyte - Ormolyte is reported, which were obtained by the sol-gel process, they have a chemical stability due to the covalent bonds between the inorganic and organic phase, and were prepared with different [O]/[L] ratios, being the best for [O]/[L]=15. The variation of transmittance of the electrochromic device using the ormolyte [O]/[L]=15 was 35% (colored state) and 77% (bleached state)

Gelation of siloxane-poly(oxypropylene) composites

The viscoelastic properties of siloxane-poly(oxypropylene) (PPO) nanocomposites prepared by the sol-gel process has been analyzed during gelation by dynamic rheological measurements. The changes of storage and loss moduli, complex viscosity and phase angle has been measured as a function of time showing the newtonian viscosity of the sol in the initial step of gelation, and its progressive transformation to a viscoelastic gel. The rheologic properties have been correlated to mass fractal, nearly linear growth models and percolation theory. This study, completed by quasi-elastic light scattering and Si-29 solid state nuclear magnetic resonance measurements, shows that the mechanisms of gelation of siloxane-PPO hybrids depend on the molecular weight of the polymer and on the pH of the hybrid sol. For hybrids prepared in acid medium, a polymerization involving silicon reactive species located at the extremity of the polymer chains and presenting a functionality f = 2 occurs, forming a fractal structure during the first stage of sol-gel transition. For samples prepared under neutral pH, the fractal growth is only observed for hybrids containing short polymer chains (M-w similar to 130 gmol(-1)). The fractal dimensionality determined from the change in the rheological properties, indicates that the fractal growth mechanism changes from reaction-limited to diffusion-limited aggregation when the molecular weight of the PPO increases from 130 to 4000 gmol(-1) and as catalyst conditions change from acidic to neutral. Near the gel point, these hybrid gels have the typical scaling behavior expected from percolation theory. (C) 2002 Elsevier B.V. B.V. All rights reserved

Electrical percolation during gelation of lithium doped siloxane-poly(oxyethylene) hybrids

Gelation mechanisms of lithium-doped Siloxane-Poly(oxyethylene) (PEO) hybrids containing polymer of two different molecular weight (500 and 1900 g/mol) were investigated through the evolution of the electrical properties during the solgel transition. The results of electrical measurements, performed by in-situ complex impedance spectroscopy, were correlated with the coordination and the dynamical properties of the lithium ions during the process as shown by Li-7 NMR measurements. For both hybrids sols, a decrease of the conductivity is observed at the initial gelation stage, due to the existence of an inverted percolation process consisting of the progressive separation of solvent molecules containing conducting species in isolated islands during the solid network formation. An increase of conductivity occurs at more advanced stages of gelation and aging, attributed to the increasing connectivity between PEO chains promoted by the formation of crosslinks of siloxane particles at their extremities, favoring hopping motions of lithium ions along the chains

Effect of lithium doping on the evolution of rheological and structural properties during gelation of siloxane-poly(oxypropylene) nanocomposites

The influence of lithium doping on the evolution of viscoelastic properties and structure during the gelation of siloxane-poly(oxypropylene) (PPO) nanocomposites has been studied. For several [O]/[Li] ratios (O being the oxygen of the ether-type), dynamic Rheological measurements allowed us to follow the evolution of storage and loss moduli, complex viscosity and phase angle during gelation of Li+-doped hybrid sols. All samples exhibit a Newtonian viscous character in the initial step of the process and are progressively transformed into viscoelastic gels. The evolution of the rheological properties of these systems allowed us to determine the aggregation mechanisms of silicon species present in hybrid sols, which lead to sol-gel transformation: mass fractal growth and nearly linear growth at the beginning of gelation, and percolation at the final stage of the process. The influence of doping on the aggregation mechanisms depends on the polymer molecular weight: while for hybrids containing long polymer chains (Mw = 4000 g mol-1) gelation occurs in the initial stages through diffusion-limited monomer-cluster aggregation (DLMCA) for all doping levels, this mechanism is only observed for hybrids containing short chains (Mw = 130 g mol-1) at low lithium concentration ([O]/[Li] = 80). For undoped and high doped siloxane-PPO130 composites ([O]/[Li] = 4), cluster-cluster aggregation is the predominant mechanism occurring at the initial gelation stages. The nature and the proportion of the different coordination sites for lithium cations in the hybrid sols, determined by 7Li NMR and infrared spectroscopy, affect the aggregation mechanisms during gelation and the condensation degree of the siloxane phase in the final dried materials. © The Royal Society of Chemistry 2005.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Small-angle X-ray scattering study of sol-gel-derived siloxane-PEG and siloxane-PPG hybrid materials

Hybrid organic-inorganic two-phase nanocomposites of siloxane-poly(ethylene glycol) (SiO3/2-PEG) and siloxane-poly(propylene glycol) (SiO3/2-PPG) have been obtained by the sol-gel process. In these composites, nanometric siloxane heterogeneities are embedded in a polymeric matrix with covalent bonds in the interfaces. The structure of these materials was investigated in samples with different molecular weights of the polymer using the smalt-angle X-ray scattering (SAXS) technique. The SAXS spectra exhibit a well-defined peak that was attributed to the existence of a strong spatial correlation of siloxane clusters. LiClO4-doped siloxane-PEG and siloxane-PPG hybrids, which exhibit good ionic conduction properties, have also been studied as a function of the lithium concentration [O]/[Li], O being the oxygens of ether type. SAXS results allowed us to establish a structural model for these materials for different basic compositions and a varying [Li] content. The conclusion is consistent with that deduced from ionic conductivity measurements that exhibit a maximum for [O]/[Li] =15