1,681 research outputs found
Experimental and numerical investigation on the structural performance of the tensioning air beam system
An experimental and numerical study on the structural performance of the tensioning air beam system (TABS) is presented. TABS is a hybrid structural system consisting of a membrane air beam, steel frames and cable struts. This system has the advantage of reduced self-weight and is easy to construct while it can improve the load bearing capacity of membrane structures. It maximizes the structural capacities of individual elements, thus can be considered as a very effective system in terms of both structural and economical aspects. In this paper, a test was carried out to examine the structural performance of TABS under different membrane pressure conditions. The material properties of the air beam were obtained from the results of two membrane tensile strength tests, which were performed prior to the main test. A simple numerical model was proposed to predict the structural behavior of TABS and its validity was evaluated by comparing its results with the test values
A New pH-ISFET Based Dissolved Oxygen Sensor
A new dissolved oxygen sensor based on pH-ISFET has been discussed. A platinum working electrode surrounding a pH-sensing gate of the pH-ISFET electrolyzes dissolved oxygen, resulting in a corresponding pH change. The pH-ISFET can determine dissolved oxygen concentration through detecting this pH change. --Summar
Superconductivity from purely repulsive interactions in the strong coupling approach : Application of the SU(2) slave-rotor theory to the Hubbard model
We propose a mechanism of superconductivity from purely repulsive
interactions in the strong coupling regime, where the BCS
(Bardeen-Cooper-Schrieffer) mechanism such as the spin-fluctuation approach is
difficult to apply. Based on the SU(2) slave-rotor representation of the
Hubbard model, we find that the single energy scale for the amplitude formation
of Cooper pairs and their phase coherence is separated into two energy scales,
allowing the so called pseudogap state where such Cooper pairs are coherent
locally but not globally, interpreted as realization of the density-phase
uncertainty principle. This superconducting state shows the temperature-linear
decreasing ratio of superfluid weight, resulting from strong phase
fluctuations
Large-Scale Plasma Polymer Coating on Heat Exchanger Fins for Improving the Wettability
This research presents the results of the recently developed large-scale hydrophilic polymer coating by plasma polymerization, optimum plasma zone (OPZ) process. The excellent hydrophilicity of heat exchanger fin surface could give good effects to efficient drainage of condensate water as well as heat transfer performance. The hydrophilicity of layer treated by large-scale OPZ system is excellent irrespective of line speed from 0.6 m/min to 2.4 m/min. The good lateral uniformity of the hydrophilicity could be acquired in large scale OPZ treatment. The application of OPZ technique to the heat exchanger could enhance the efficiency of heat transfer, resulting from decrease of pressure drop. Due to long-term durability of hydrophilicity, the heat transfer performance improved by OPZ process cannot be deteriorated with operation cycle
Resonance of Domain Wall in a Ferromagnetic Nanostrip: Relation Between Distortion and Velocity
The resonance of the magnetic domain wall under the applied field amplifies
its velocity compared to the one-dimensional model. To quantify the
amplification, we define the distortion variation rate of the domain wall that
can represent how fast and severely the wall shape is variated. Introducing
that rate gives a way to bring the resonance into the one-dimensional domain
wall dynamics model. We obtain the dissipated energy and domain wall velocity
amplification by calculating the distortion variation rate. The relationship
between velocity and distortion variation rate agrees well with micromagnetic
simulation.Comment: 15 pages, 4 figure
Antiferromagnetic metal to heavy-fermion metal quantum phase transition in the Kondo lattice model: A strong coupling approach
We study the quantum phase transition from an antiferromagnetic metal to a
heavy fermion metal in the Kondo lattice model. Based on the strong coupling
approach we {\it first} diagonalize the Kondo coupling term. Since this strong
coupling approach makes the resulting Kondo term {\it relevant}, the Kondo
hybridization persists even in the antiferromagnetic metal, indicating that
fluctuations of Kondo singlets are not critical in the phase transition. We
find that the quantum transition in our strong coupling approach results from
{\it softening of antiferromagnetic spin fluctuations of localized spins},
driven by the Kondo interaction. Thus, the volume change of Fermi surface
becomes continuous across the transition. .....
Soft x-ray polarizer for optical productions of any orthogonal state of the linear and circular polarization modes
An efficient soft x-ray polarizer that is able to optically convert a linear polarization state to any orthogonal state of not only linear but also circular polarization modes is found by means of numerical calculations of the intensities of individual orthogonal polarization components in reflected waves. Calculation results, using the known linear-polarization-mode based Kerr matrix as well as a newly derived circular-polarization-mode based Kerr matrix, indicate that a +45?? or -45?? linearly polarized incident wave can be readily converted to any orthogonal states of both circular and linear polarization modes, i.e., left- and right-handed circular and s - and p -linear polarizations through reflection, at certain grazing angles of incidence near the critical angle from a simple ferromagnetic thin film of Co (9.0 nm) Si substrate. The intensities of almost pure circularly or linearly polarized reflected waves are about 10% or less in a certain spectral soft x-ray range just below the absorption edges of constituent magnetic elements. The counterpart orthogonal states of the linear as well as circular modes can be rapidly switched simply by reversing oppositely the orientation of longitudinal magnetizations. These results suggest that the orthogonal polarization states of the circular- and linear-polarization modes converted from such a polarizing optical element through reflection can be practically used in probing the vector quantities of element specific magnetizations in multicomponent magnetic materials.open2
Origin, criterion, and mechanism of vortex-core reversals in soft magnetic nanodisks under perpendicular bias fields
We studied dynamics of vortex-core reversals driven by circular rotating fields along with static perpendicular magnetic fields of different direction and strength. We found that the application of perpendicular fields H p modifies the starting ground state of vortex magnetizations, thereby instigating the development of a magnetization dip mz,dip in the vicinity of the original core up to its threshold value, m z,dip cri ???-p, which is necessary for vortex-core reversals, where p is the initial core polarization. We found the relationship of the dynamic evolutions of the mz,dip and the out-of-plane gyrofields hz, which was induced, in this case, by vortex-core motion of velocity ??, thereby their critical value relation ??crihz cri. The simulation results indicated that the variation of the critical core velocity ??cri with Hp can be expressed explicitly as ??cri / ?? cri 0 = (??/ ??0) | -p- m z,dip g |, with the core size ?? and the starting ground-state magnetization dip m z,dip g variable with H p, and for the values of ?? cri 0 and ??0 at H p =0. This work offers deeper and/or new insights into the origin, criterion and mechanism of vortex-core reversals under application of static perpendicular bias fields.open7
- …