Full-Color LCD Microdisplay System Based on OLED Backlight Unit and Field-Sequential Color Driving Method

We developed a single-panel LCD microdisplay system using a field-sequential color (FSC) driving method and an organic light-emitting diode (OLED) as a backlight unit (BLU). The 0.76′′ OLED BLU with red, green, and blue (RGB) colors was fabricated by a conventional UV photolithography patterning process and by vacuum deposition of small molecule organic layers. The field-sequential driving frequency was set to 255 Hz to allow each of the RGB colors to be generated without color mixing at the given display frame rate. A prototype FSC LCD microdisplay system consisting of a 0.7′′ LCD microdisplay panel and the 0.76′′ OLED BLU successfully exhibited color display and moving picture images using the FSC driving method

Toxicity Studies on Secretio Bufonis: A Traditional Supplement in Asia

AbstractObjectivesThis study was performed to investigate the toxicity of Secretio Bufonis (SB) on male mice and assess its no-observed-adverse-effect-level (NOAEL).Materials and MethodsAfter feeding an aqueous solution of SB extracts to mice for either 1 or 8 weeks, their blood and urine were assayed and their liver and kidney morphology examined. The numerical data was analyzed by the Mann-Whitney U-test and analysis of variance test.ResultsMice administered SB in 50 mg/kg/day for 1 week had higher heart weights and higher aspartate transaminase activities; those administered SB in 0.01 and 0.05 mg/kg/day for 8 weeks had lower creatinine concentrations; and those administered SB in 0.5 mg/kg/day for 8 weeks had higher brain weights and higher blood urea nitrogen.ConclusionsThe extracts of SB had cardiac toxicity in the short term and hepatotoxicity in the long term. The NOAEL of the extract was under 5 mg/kg/day for 1 week and under 0.25 mg/kg/day for 8 weeks

Effects of a dianion compound as a surface modifier on the back reaction of photogenerated electrons in TiO2-based solar cells

The TiO2 films were modified with a dianion compound, 1,2-ethanedisulfonic acid disodium salt (ESD), to give a negative charge (ethane sulfonate anion) on the TiO2 surface, i.e., TiO2-O-SO2-CH2-CH2-SO3 −), and effects of repulsion between the negative charge and ions (I3 −) of the electrolyte on the performance of dye-sensitized solar cells (DSSCs) were investigated. The reference device without any modification showed a power conversion efficiency (PCE) of 9.89%, whereas for the device with ESD(20)-TiO2/FTO, which was prepared by soaking bare TiO2/FTO in an ESD solution for 20 min, the PCE was increased to 10.97%, due to an increase in both short-circuit current (Jsc) and open-circuit voltage(Voc). It was verified from the measurements of electrochemical impedance, open-circuit voltage decay and dark current that the enhancement in the Jsc and Voc values was attributed to the reduced back reaction between photoinjected electrons and I3 − ions, resulting from the presence of the ethane sulfonate anions on the TiO2 surface. © 2018 King Saud University1

Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods

At an elevated temperature of 90°C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3− ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.1

Topical application of epidermal growth factor accelerates wound healing by myofibroblast proliferation and collagen synthesis in rat

Recombinant human epidermal growth factor (rhEGF) stimulates the proliferation and migration of epithelial cells in human cell culture systems and animal models of partial-thickness skin wounds. This study investigated the effect of a topical rhEGF ointment on the rate of wound healing and skin re-epithelialization in a rat full thickness wound model, and verified whether or not the rhEGF treatment affected both myofibroblast proliferation and collagen synthesis in the dermis. When rhEGF (10 µg/g ointment) was applied topically twice a day for 14 days, there was significantly enhanced wound closure from the 5th to the 12th day compared with the control (ointment base treatment) group. A histological examination at the postoperative 7th day revealed that the rhEGF treatment increased the number of proliferating nuclear antigen immunoreactive cells in the epidermis layer. In addition, the immunoreactive area of alpha-smooth muscle actin and the expression of prolyl 4-hydroxylase were significantly higher than those of the control group. Overall, a topical treatment of rhEGF ointment promotes wound healing by increasing the rate of epidermal proliferation and accelerating the level of wound contraction related to myofibroblast proliferation and collagen deposition