765 research outputs found
Robust low loss splicing of hollow core photonic bandgap fiber to itself
Robust, low loss (0.16dB) splicing of hollow core photonic band gap fiber to itself is presented. Modal content is negligibly affected by splicing, enabling penalty-free 40Gbit/s data transmission over > 200m of spliced PBGF
Predicting Structural and Optical Properties of Hollow-Core Photonic Bandgap Fibers from Second Stage Preforms
We propose a simple theory based on mass conservation that allows accurate prediction of guidance properties in hollow-core photonic bandgap fibers (HC-PBGF) from knowledge of the second stage preforms from which the fibers are drawn
Manufacturing of high performance hollow core microstructured optical fibres
Although fabrication technologies of Microstructured Optical Fibres (MOFs) fibres have matured at an impressive rate over the past ten years, these fibres are widely perceived as "challenging" and some key issues are still outstanding in order to improve their manufacturability. One such issue revolves around methods to improve structural control during the fibre draw. Structural control is of particular importance for certain types of microstructured fibres, such as hollow core Photonic Bandgap Fibres (PBGFs) and Anti-resonant (AR) fibres (also known as Kagome fibres). These fibres exploit resonant and/or anti-resonant guidance mechanisms and thus their transmission properties depend on the structure to a much greater extent as compared to conventional fibres. Hollow core MOFs have been identified as promising media for applications such as low latency (speed-of-light-in-air) communications, fibre sensing (chemical sensing, gyroscopes, sensors based on distributed scattering), laser power delivery (both high-peak and high average). However the successful implementation of these fibres in advanced demonstrators leading to commercial devices has been hindered by high cost, poor consistency and, in some instances, by lack of fibres with sufficiently good properties. We are actively investigating methods to improve structural control during the fibre draw and methods for scaling up the current manufacturing yields. Here we present recent progress in the fabrication hollow core MOFs at the Optoelectronics Research Centre; in particular, we report the fabrication of ultra-low loss (~few dB/km), wide bandwidth (>150nm) Photonic Bandgap Fibres and anti-resonant Hexagram Fibres with broadband low loss transmission suitable for the delivery of extremely high peak optical powers
Understanding wavelength scaling in 19-cell core hollow-core photonic bandgap fibers
First experimental wavelength scaling in 19-cell core HC-PBGF indicates that the minimum loss waveband occurs at longer wavelengths than previously predicted. Record low loss (2.5dB/km) fibers operating around 2µm and gas-purging experiments are also reported
Mitigating spectral leakage and sampling errors in spatial and spectral (S2) imaging
We present a novel method for validating the relative power value (MPI) of the Spatial and Spectral (S2) imaging technique. By applying corrections for spectral leakage and sampling errors we found the MPI determinations to be accurate within 1dB
Complementary analysis of modal content and properties in a 19-cell hollow core photonic band gap fiber using Time-of-Flight and S2 techniques
We study the rich multimode content of an ultra-low loss hollow core photonic bandgap fiber using two complementary techniques which allow us to investigate both short and long propagation distances. Several distinct vector modes are clearly identified, with evidence of low intermodal coupling and distributed scattering
1.45 Tbit/s low latency data transmission through 19-cell hollow core photonic band gap fibre
We report transmission of 37 x 40 Gbit/s C-band channels over 250 m of hollow core band gap fibre, at 99.7% the speed of light in vacuum. BER penalty below 1 dB as compared to back-to-back was measured across the C-band
Low loss, tightly coilable, hollow core photonic bandgap fibers for mid-IR applications
We describe low loss (50dB/km at 3.3µm) and low bend sensitivity mid-IR hollow core-photonic bandgap fiber. Gas sensing applications are highlighted by a methane spectrum recorded in our fiber
Hollow core photonic bandgap fibers for mid-IR applications
We review our fabrication of low loss (50dB/km at 3.3µm) and low bend sensitivity HC-PBGFs for mid-IR operation. Gas sensing applications are highlighted by a high resolution methane spectrum recorded in 1.26m of gas-filled fibe
Towards manufacture of ultralow loss hollow core photonic bandgap fiber
Hollow core photonic bandgap fibers (HC-PBGFs) are a class of optical fibers which guide light in a low index core region surrounded by a triangular lattice of air holes separated by a delicate silica web. The precise nature of this cladding structure requires extremely fine control of the fabrication parameters. While HC-PBGFs have found wide range of exciting research applications the initially anticipated potential for ultralow loss below that of single mode fiber (SMF) has yet to be realized. To date loss figures as low as 1.7 dB/km have been reported, however surface roughness at the core cladding interface limited further loss reduction. The loss of HC-PBGFs can potentially be decreased further by increasing the core dimensions and through optimisation of the fabrication process. To date, the manufacture of HC-PBGFs is reliant upon the two stage stack and draw process. To target ultralow loss below what has been reported to date it has become necessary to ensure repeatability and uniformity in the labor intensive stack and draw process. Repeatability is ensured through rigorous cleanliness throughout preform preparation and by precise fabrication control at each stage of manufacture. Figure 1. a) Scanning electron micrograph of a 19 cell core defect HC-PBGF, b) Attenuation scaling of the photonic bandgap (PBG) versus central guidance wavelength of 19 cell core defect HC-PBGF.Greater than 1 km lengths of HC-PBGF (Fig. 1a) can now be drawn with typical attenuations of the order of 2-3 dB/km and with significantly improved optical bandwidth (~ 100 nm) compared with previously reported. These developments open up HC-PBGF for a range of applications such as telecommunications, laser power delivery, gas sensing and strong light matter interactions, for which they have a clear advantage over conventional fibers. The attenuation scaling of the photonic bandgap (PBG) (solid curves) with central operating wavelength has been investigated in 19 cell core defect fibres (Fig. 1b). The expected attenuation proportional to lambda[-3] relationship (dashed red curve) is observed until the infrared absorption edge of silica (black dot dash curve) is breached and the attenuation increases (green curve). Through strategic fabrication improvements we have achieved repeatable low loss manufacture of HC-PBGFs. Future developments in fabrication control and fiber design will allow the realization of ultralow loss HC-PBGF
- …