Thermal performance of high voltage power cables

The UK high voltage electricity transmission network continues to face annual rises in demand, with ever greater volumes of power supplied to load centres throughout the country. To operate this network effectively, it is vital to accurately calculate the maximum allowable electric current which can be safely carried by each component in the power system. In high voltage power cables, this limit is defined by the maximum operating temperature of the cable insulation. Specify this current rating to be too low and the cable asset will never be used to its full potential; conversely setting the rating to be too high risks damage to the asset as the excessive heating can cause premature failure. Thus the rating calculation must be optimised to maintain security of supply by minimising the risk of cable failure, while also maximising the returns from capital investment on the power network. This project has employed a variety of mathematical techniques to improve the methods by which current ratings are calculated. Modern computational techniques such as finite element analysis (e.g Figure 1) and computational fluid dynamics are used to create more advanced circuit rating techniques. These have been compared and refined with input gained from field data. By eliminating simplifications from existing methods, it has been possible to identify ways of increasing the utilisation of the existing network. In addition the new techniques allow examination of the potential benefits of future developments in cable technology. Benefits are being derived from this work on both a day to day and strategic planning levels. For instance, by re-evaluating the current rating method for cables installed in tunnels, it has proved possible to consider the benefits from co-locating more cables in one tunnel to best use these expensive assets. The application of this method has allowed the quantification of the benefits which might be available from next generation cable technologies, enabling the prioritisation of future research effort in cable materials. Upon completion, the knowledge gained from this work is to be used to revise the international standard on calculating current ratings in cable tunnels. Techniques such as these underpin the concept of smart grids with improved operational flexibility and capability. Simultaneously the requirement to build expensive new components into the network is limited, whilst still meeting the need to supply ever increasing volumes of power across the country

Compact high-power tunable three-level operation of double cladding Nd-doped fiber laser

We present a compact high-power continuous-wave tunable neodymium-doped double cladding fiber laser operating on three-level 4F3/2 - 4I9/2 transition with a maximum output power up to 810 mW. At 926.7 nm, it has a maximum slope efficiency of 49.3% against absorbed 808-nm pump. By compressing the fiber Bragg grating, 15-nm tuning range is achieved

RGB generation by four-wave mixing in small-core holey fibers

We report the generation of white light comprising red, green, and blue spectral bands from a frequency-doubled fiber laser by an efficient four-wave mixing process in submicron-sized cores of microstructured holey fibers. A master-oscillator power amplifier (MOPA) source based on Yb-doped fiber is employed to generate 80 ps pulses at 1060 nm wavelength with 32 MHz repetition rate, which are then frequency-doubled in an LBO crystal to generate up to 2 W average power of green light. The green pump is then carefully launched into secondary cores of the cladding of photonic bandgap fibers. These secondary cores with diameters of about 400 to 800 nm act as highly nonlinear waveguides. At the output, we observe strong red and blue sidebands which, together with the remaining green pump light, form a visible white light source of about 360 mW. The generating process is identified as four-wave mixing where phase matching is achieved by birefringence in the secondary cores which arises from non-symmetric deformation during the fiber fabrication. Numerical models of the fiber structure and of the nonlinear processes confirm our interpretation. Finally, we discuss power scaling and limitations of the white light source due to the damage threshold of silica fibers

Optical fiber fabrication using novel gas-phase deposition technique

We report a highly versatile chemical-in-crucible preform fabrication technique suitable for gas-phase deposition of doped optical fibers. Aluminosilicate and ytterbium-doped phosphosilicate fibers are presented demonstrating the technique and its potential for realizing complex fiber designs that are suitable for the next generation of high-power fiber devices. The results show aluminum-doped fiber with numerical aperture of 0.28 and ytterbium-doped fiber with a measured slope efficiency of 84% with respect to pump launch power

Dispersion decreasing fibres for soliton generation and transmission line loss compensation

The idea of varying the axial distribution of dispersion along a length of optical fibre as a means of manipulating and controlling the soliton supporting nature of the fibre and thereby the characteristics of soliton pulses propagating through the medium has been around for some while. A number of specific applications have been suggested in particular techniques for bright and dark soliton generation, pulse compression and most notably techniques for high frequency soliton transmission. The experimental realisation of most of these techniques however has been hindered by difficulties in the reliable fabrication of dispersion varying fibres. A technique for the fabrication of such fibres was first developed by workers at General Physics Institute, Moscow. Control of the waveguide dispersion was achieved by active control of fibre diameter during the pull. Fibre lengths of up to 2km were fabricated and successfully used in the first experimental demonstrations of high frequency (>60 GHz) bright soliton generation and pulse compression. Subsequent to these first experimental results a number of other groups have commenced fabrication programs on such fibres, extending the techniques to fibre lengths of 40km. In this presentation we describe our latest achievements in Dispersion Decreasing Fibre (DDF) fabrication and report on two applications of the technology. Firstly, we describe a robust, diode-pumped, 40GHz bright soliton transmitter, and secondly we demonstrate loss compensation in a 38km loss-matched dispersion varying fibre

Enhanced optical properties of Tm³⁺ in f co-doped lead germanate glasses for fibre device applications

The effect on structure and property of adding fluoride into Tm3+ doped lead-germanate glass was established and verified experimentally. It was found that up to 10 mol% of fluoride could be introduced into our original lead-germanate composition while retaining the high thermal stability ideal for fibre fabrication. Much improved spectroscopic features, namely increased fluorescent lifetimes from 3H4 and 3F4 levels in Tm3+ with increasing fluorine content, were observed. At the same time it was found that the radiative properties of Tm3+ were left unchanged by fluoride addition, indicating that reduced multiphonon relaxation was responsible for the increased fluorescent lifetimes. This was well explained and foreseen by our established structure-property relation in terms of adding fluorine to the glass. In conclusion, fluoro-germanate glass shows advantages over germanate glass in optical properties and over fluoride glass in chemical and mechanical properties for practical fiber device applications. [Presentation slides

Locally erasable couplers for optical device testing in silicon on insulator

Wafer scale testing is critical to reducing production costs and increasing production yield. Here we report a method that allows testing of individual optical components within a complex optical integrated circuit. The method is based on diffractive grating couplers, fabricated using lattice damage induced by ion implantation of germanium. These gratings can be erased via localised laser annealing, which is shown to reduce the outcoupling efficiency by over 20 dB after the device testing is completed. Laser annealing was achieved by employing a CW laser, operating at visible wavelengths thus reducing equipment costs and allowing annealing through thick oxide claddings. The process used also retains CMOS compatibility

Ultramafic xenoliths from the Bearpaw Mountains, Montana, USA: evidence for multiple metasomatic events in the lithospheric mantle beneath the Wyoming craton

Ultramafic xenoliths in Eocene minettes of the Bearpaw Mountains volcanic field (Montana, USA), derived from the lower lithosphere of the Wyoming craton, can be divided based on textural criteria into tectonite and cumulate groups. The tectonites consist of strongly depleted spinel lherzolites, harzburgites and dunites. Although their mineralogical compositions are generally similar to those of spinel peridotites in off-craton settings, some contain pyroxenes and spinels that have unusually low Al2O3 contents more akin to those found in cratonic spinel peridotites. Furthermore, the tectonite peridotites have whole-rock major element compositions that tend to be significantly more depleted than non-cratonic mantle spinel peridotites (high MgO, low CaO, Al2O3 and TiO2) and resemble those of cratonic mantle. These compositions could have been generated by up to 30% partial melting of an undepleted mantle source. Petrographic evidence suggests that the mantle beneath the Wyoming craton was re-enriched in three ways: (1) by silicate melts that formed mica websterite and clinopyroxenite veins; (2) by growth of phlogopite from K-rich hydrous fluids; (3) by interaction with aqueous fluids to form orthopyroxene porphyroblasts and orthopyroxenite veins. In contrast to their depleted major element compositions, the tectonite peridotites are mostly light rare earth element (LREE)-enriched and show enrichment in fluid-mobile elements such as Cs, Rb, U and Pb on mantle-normalized diagrams. Lack of enrichment in high field strength elements (HFSE; e.g. Nb, Ta, Zr and Hf) suggests that the tectonite peridotites have been metasomatized by a subduction-related fluid. Clinopyroxenes from the tectonite peridotites have distinct U-shaped REE patterns with strong LREE enrichment. They have 143Nd/144Nd values that range from 0·5121 (close to the host minette values) to 0·5107, similar to those of xenoliths from the nearby Highwood Mountains. Foliated mica websterites also have low 143Nd/144Nd values (0·5113) and extremely high 87Sr/86Sr ratios in their constituent phlogopite, indicating an ancient (probably mid-Proterozoic) enrichment. This enriched mantle lithosphere later contributed to the formation of the high-K Eocene host magmas. The cumulate group ranges from clinopyroxene-rich mica peridotites (including abundant mica wehrlites) to mica clinopyroxenites. Most contain >30% phlogopite. Their mineral compositions are similar to those of phenocrysts in the host minettes. Their whole-rock compositions are generally poorer in MgO but richer in incompatible trace elements than those of the tectonite peridotites. Whole-rock trace element patterns are enriched in large ion lithophile elements (LILE; Rb, Cs, U and Pb) and depleted in HFSE (Nb, Ta Zr and Hf) as in the host minettes, and their Sr–Nd isotopic compositions are also identical to those of the minettes. Their clinopyroxenes are LREE-enriched and formed in equilibrium with a LREE-enriched melt closely resembling the minettes. The cumulates therefore represent a much younger magmatic event, related to crystallization at mantle depths of minette magmas in Eocene times, that caused further metasomatic enrichment of the lithosphere

Pulse repetition-rates in a passive, self-starting, femtosecond soliton fibre laser

Several unusual pulsing modes are observed in a self-starting, passively mode-locked erbium fibre soliton laser capable of generating pulses with durations as short as 320 fsec

50-fs pulse generation in an integrated erbium-doped fiber-laser/amplifier module

We report the generation of 50 - 90fs solitons from an all-fibre passively mode-locked erbium-doped fibre laser in combination with an erbium fibre amplifier