The Luminous Convolution Model as an alternative to dark matter in spiral galaxies

The Luminous Convolution Model (LCM) demonstrates that it is possible to predict the rotation curves of spiral galaxies directly from estimates of the luminous matter. We consider two frame-dependent effects on the light observed from other galaxies: relative velocity and relative curvature. With one free parameter, we predict the rotation curves of twenty-three (23) galaxies represented in forty-two (42) data sets. Relative curvature effects rely upon knowledge of both the gravitational potential from luminous mass of the emitting galaxy and the receiving galaxy, and so each emitter galaxy is compared to four (4) different Milky Way luminous mass models. On average in this sample, the LCM is more successful than either dark matter or modified gravity models in fitting the observed rotation curve data. Implications of LCM constraints on populations synthesis modeling are discussed in this paper. This paper substantially expands the results in arXiv:1309.7370.Comment: Implications of LCM constraints on populations synthesis modeling are discussed in this paper. This paper substantially expands the results in arxiv:1309.737

The Stationary Phase Method for a Wave Packet in a Semiconductor Layered System. The applicability of the method

Using the formal analysis made by Bohm in his book, {\em "Quantum theory"}, Dover Publications Inc. New York (1979), to calculate approximately the phase time for a transmitted and the reflected wave packets through a potential barrier, we calculate the phase time for a semiconductor system formed by different mesoscopic layers. The transmitted and the reflected wave packets are analyzed and the applicability of this procedure, based on the stationary phase of a wave packet, is considered in different conditions. For the applicability of the stationary phase method an expression is obtained in the case of the transmitted wave depending only on the derivatives of the phase, up to third order. This condition indicates whether the parameters of the system allow to define the wave packet by its leading term. The case of a multiple barrier systems is shown as an illustration of the results. This formalism includes the use of the Transfer Matrix to describe the central stratum, whether it is formed by one layer (the single barrier case), or two barriers and an inner well (the DBRT system), but one can assume that this stratum can be comprise of any number or any kind of semiconductor layers.Comment: 15 pages, 4 figures although figure 4 has 5 graph

Comportamiento de hormigón confinado con FRP en pilares cuadrados

A significant amount of research has been conducted on FRP-confined circular columns, but much less is known about rectangular/square columns in which the effectiveness of confinement is much reduced. This paper presents the results of experimental investigations on low strength square concrete columns confined with FRP. Axial compression tests were performed on ten intermediate size columns. The tests results indicate that FRP composites can significantly improve the bearing capacity and ductility of square section reinforced concrete columns with rounded corners. The strength enhancement ratio is greater the lower the concrete strength and also increases with the stiffness of the jacket. The confined concrete behaviour was predicted according to the more accepted theoretical models and compared with experimental results. There are two key parameters which critically influence the fitting of the models: the strain efficiency factor and the effect of confinement in non-circular sections.La mayoría de las investigaciones sobre hormigón confinado con FRP se han realizado sobre pilares de sección circular, pero el comportamiento en secciones cuadradas/rectangulares, donde el confinamiento es menos eficaz, es mucho menos conocido. Este trabajo presenta los resultados de un estudio experimental sobre probetas de hormigón de baja resistencia y sección cuadrada. Se han ensayado a compresión centrada diez probetas de tamaño intermedio. Los resultados indican que el confinamiento mejora significativamente la resistencia y ductilidad del hormigón en columnas de sección cuadrada con las esquinas redondeadas. El incremento de resistencia es mayor cuanto menor es la resistencia del hormigón sin confinar y también aumenta con la rigidez del encamisado. Los resultados se compararon con los obtenidos según los modelos teóricos más aceptados. Hay dos parámetros críticos en el ajuste de los modelos: el factor de eficiencia de la deformación y el efecto de confinamiento en secciones no circulares

Multiphoton Ionization of Uracil at 355 nm

We present the experimental results from ionization and dissociation by multiphoton absorption (MPI) of uracil and a mixture of uracil with Ar using a Reflectron time of flight spectrometer along with radiation from 355 nm at pulsed Nd:YAG laser . We focus on the light ions production. The MPI mass spectra show that the presence and intensity of the resulting ions depend on the density power of the laser. The resulting ions in the mass spectra are identified and found similar behavior in the case of H+ and C+ as when multiple charged ions are used. Different results were found in contrast with those, recently reported, when electrons or photons of other wavelength were used. The number of 355nm absorbed photons was calculated accordingly to Keldysh theory and similar results were fond using pure uracil or uracil-Ar mixture. Our results are compared with those obtained in other laboratories under different experimental conditions, some of them show only partial agreement and differences are discussed

Comparación de sensores PZT y FBG para la detección de despegues en vigas de hormigón armado reforzadas externamente con bandas de CFRP y sometidas a cargas de flexión

The development of monitoring technologies particularly suitable to be used with novel CFRP strengthening techniques has gained great attention in recent years. However, in spite of the high performance of these advanced composite materials in the strengthening and repairing of structures in service, they are usually associated with brittle and sudden failure mainly caused by debonding phenomena, originated either at the CFRP-plate end or at the intermediate areas in the vicinity of flexural cracks in the RC beam. Thus, it is highly recommended for these structures to be monitored in order to ensure their integrity while in service. Specifically, the feasibility of smart sensing technologies such as Fiber Bragg Grating (FBG) sensors and piezo-impedance transducers (PZT) has been studied. To the knowledge of the authors, none serious study has been carried out until now concerned to the topic of damage detection due to debonding in rehabilitated structures with CFRP composites.El desarrollo de tecnologías de monitorización aplicables junto con las novedosas técnicas de refuerzo basadas en materiales CFRP ha recibido una atención creciente los últimos años. Sin embargo, a pesar del alto rendimiento de estos avanzados materiales compuestos en la reparación y refuerzo de estructuras en servicio, están habitualmente asociados a fallos frágiles y repentinos causados principalmente por fenómenos de despegue, originados bien en los extremos del refuerzo, bien en áreas intermedias en las proximidades de grietas de flexión existentes en la viga. Por tanto, es altamente recomendable monitorizar estas soluciones estructurales de cara a garantizar su integridad en servicio. Específicamente, se ha estudiado la viabilidad de sensores inteligentes tales como los sensores Fiber Bragg Grating (FBG) o los transductores piezoeléctricos (PZT). Hasta donde los autores saben, no se han realizado estudios serios hasta la fecha abordando la detección de daño debido al despegue en estructuras reforzadas con compuestos CFRP

A prospective randomized trial comparing sequential ganciclovir-high dose acyclovir to high dose acyclovir for prevention of cytomegalovirus disease in adult liver transplant recipients

Cytomegalovirus disease is an important cause of morbidity following liver transplantation. To date there has not been an effective prophylaxis for CMV disease after liver transplantation. One hundred forty-three patients were randomized to receive either high dose oral acyclovir (800 mg 4 times a day) alone for 3 months after transplantation (acyclovir group) or intravenous ganciclovir (5 mg/kg twice a day) for 14 days followed by high dose oral acyclovir to complete a 3-month regimen (ganciclovir group). Of 139 patients available for evaluation, 43 of 71 (61%) patients from the acyclovir group developed CMV infection compared with 16 of 68 (24%) from the ganciclovir group (relative risk, 3.69; 95% confidence interval, 2.07-6.56; PcO.OOOOl). Of those randomized, CMV disease was seen in 20 (28%) of the acyclovir group compared with 6 (9%) of the ganciclovir group (relative risk, 5.11; 95% confidence interval, 2.05-12.75; P=0.0001). The median time to onset of CMV infection was 45 days in the acyclovir group compared with 78 days in the ganciclovir group (P=0.004). The median time to onset of CMV disease was 40 days in the acyclovir group compared with 78 days in the ganciclovir patients (P=0.02). With respect to primary CMV infection, there was no difference in the rates in the 2 groups, but tissue invasive disease and recurrent CMV disease were less frequent in the ganciclovir group. It is concluded that a course of 2 weeks of ganciclovir immediately after transplantation followed by high dose oral acyclovir for 10 weeks is superior to a 12-week course of high dose oral acyclovir alone for prevention of both CMV infection and CMV disease after liver transplantation. However, the lack of significant effect in seronegative recipients who received grafts from seropositive donors suggests that other strategies are needed to prevent CMV infection in this high risk population. © 1994 by Williams & Wilkins

Probing the heavy Higgs boson production and decay H0H_0 of the Bestest Little Higgs Model at the LHC and the FCC-hh

In the Bestest Little Higgs Model (BLHM) scenario, we analyze the branching ratios and production cross-section of the heavy Higgs boson $H_0$. The analysis is performed at the tree level and the one-loop level. In addition, we present results of the possible production of the heavy Higgs boson $H_0$ via gluon fusion for the center-of-mass energies and the integrated luminosities of the LHC, HE-LHC, HL-LHC, and FCC-hh. Our results show a very optimistic scenario for studying the $H_0$ scalar predicted by the BLHM and for the energies and luminosities of current and future hadron colliders.Comment: 24 pages, 10 figures. arXiv admin note: text overlap with arXiv:2302.11143, arXiv:2208.09090, arXiv:2202.1273