A microfabricated ion trap with integrated microwave circuitry

We describe the design, fabrication and testing of a surface-electrode ion trap, which incorporates microwave waveguides, resonators and coupling elements for the manipulation of trapped ion qubits using near-field microwaves. The trap is optimised to give a large microwave field gradient to allow state-dependent manipulation of the ions' motional degrees of freedom, the key to multiqubit entanglement. The microwave field near the centre of the trap is characterised by driving hyperfine transitions in a single laser-cooled 43Ca+ ion.Comment: 4 pages, 5 figure

High-fidelity trapped-ion quantum logic using near-field microwaves

We demonstrate a two-qubit logic gate driven by near-field microwaves in a room-temperature microfabricated ion trap. We measure a gate fidelity of 99.7(1)\%, which is above the minimum threshold required for fault-tolerant quantum computing. The gate is applied directly to $^{43}$Ca$^+$ "atomic clock" qubits (coherence time $T_2^*\approx 50\,\mathrm{s}$) using the microwave magnetic field gradient produced by a trap electrode. We introduce a dynamically-decoupled gate method, which stabilizes the qubits against fluctuating a.c.\ Zeeman shifts and avoids the need to null the microwave field

How to wire a 1000-qubit trapped ion quantum computer

One of the most formidable challenges of scaling up quantum computers is that of control signal delivery. Today's small-scale quantum computers typically connect each qubit to one or more separate external signal sources. This approach is not scalable due to the I/O limitations of the qubit chip, necessitating the integration of control electronics. However, it is no small feat to shrink control electronics into a small package that is compatible with qubit chip fabrication and operation constraints without sacrificing performance. This so-called "wiring challenge" is likely to impact the development of more powerful quantum computers even in the near term. In this paper, we address the wiring challenge of trapped-ion quantum computers. We describe a control architecture called WISE (Wiring using Integrated Switching Electronics), which significantly reduces the I/O requirements of ion trap quantum computing chips without compromising performance. Our method relies on judiciously integrating simple switching electronics into the ion trap chip - in a way that is compatible with its fabrication and operation constraints - while complex electronics remain external. To demonstrate its power, we describe how the WISE architecture can be used to operate a fully connected 1000-qubit trapped ion quantum computer using ~ 200 signal sources at a speed of ~ 40 - 2600 quantum gate layers per second

High-fidelity preparation, gates, memory and readout of a trapped-ion quantum bit

We implement all single-qubit operations with fidelities significantly above the minimum threshold required for fault-tolerant quantum computing, using a trapped-ion qubit stored in hyperfine "atomic clock" states of $^{43}$Ca$^+$. We measure a combined qubit state preparation and single-shot readout fidelity of 99.93%, a memory coherence time of $T^*_2=50$ seconds, and an average single-qubit gate fidelity of 99.9999%. These results are achieved in a room-temperature microfabricated surface trap, without the use of magnetic field shielding or dynamic decoupling techniques to overcome technical noise.Comment: Supplementary Information included. 6 nines, 7 figures, 8 page

Microwave control electrodes for scalable, parallel, single-qubit operations in a surface-electrode ion trap

We propose a surface ion trap design incorporating microwave control electrodes for near-field single-qubit control. The electrodes are arranged so as to provide arbitrary frequency, amplitude and polarization control of the microwave field in one trap zone, while a similar set of electrodes is used to null the residual microwave field in a neighbouring zone. The geometry is chosen to reduce the residual field to the 0.5% level without nulling fields; with nulling, the crosstalk may be kept close to the 0.01% level for realistic microwave amplitude and phase drift. Using standard photolithography and electroplating techniques, we have fabricated a proof-of-principle electrode array with two trapping zones. We discuss requirements for the microwave drive system and prospects for scalability to a large two-dimensional trap array.Comment: 8 pages, 6 figure

Experimental recovery of a qubit from partial collapse

We describe and implement a method to restore the state of a single qubit, in principle perfectly, after it has partially collapsed. The method resembles the classical Hahn spin-echo, but works on a wider class of relaxation processes, in which the quantum state partially leaves the computational Hilbert space. It is not guaranteed to work every time, but successful outcomes are heralded. We demonstrate using a single trapped ion better performance from this recovery method than can be obtained employing projection and post-selection alone. The demonstration features a novel qubit implementation that permits both partial collapse and coherent manipulations with high fidelity.Comment: 5 pages, 3 figure