The study of the rheological characteristics of pasta dough based on poly-cereal flour raw

The article presents the results of studies of indicators of rheological characteristics of dough for the production of non-traditional pasta based on whole-ground poly-cereal raw materials. The main purpose of the research is to study the indicators of the rheological characteristics of dough based on flour produced from nontraditional poly-cereal raw materials. Modern technologies make it possible to obtain pasta enriched with targeted food additives. Such pasta has a number of advantages and will be in high demand among consumers. Experimental studies have shown that the rheological properties of flour dough obtained from wholemeal flour have poor characteristics. Therefore, in order to improve the rheological characteristics of the dough, it is possible to introduce a biologically active additive in the form of dry wheat gluten (DWG) in an amount sufficient to achieve standard values of flour strength indicators. In terms of the total mass of the test sample, DWG was introduced in the ratio of 5, 10, 15 and 20 %. In the course of experimental studies, the quantitative values of the coefficients of elasticity (Ie, %) of the prototypes were determined, characterizing the tensile strength of the dough during deformation along two axes. With the addition of 5 % dry wheat gluten, the numerical value of Ie was 14.6 % for a dough based on wholeground barley flour. A further increase in the content of DWG in the  dough recipe led to an increase in the values of Ie. The analysis of experimental data showed that the rheological characteristics of the dough obtained from flour based on whole grains of cereals and legumes are significantly improved with the addition of DWG (10 % DWG – to 29.2 %, 15 % DWG – 43.8 %, 20 % DWG – 58.4 %). This confirms that the main goal of the article has been achieved

Research of microstructure and microbiological indicators of pasta products from non-traditional raw materials

Modern trends in the development of pasta production are based on the use of starch-containing raw materials for the production of medicinal and preventive pasta products. In this connection, an important observation is the state of protein and starch in pasta flour, which can be achieved by electron microscopy of the microstructure of macaroni products. Therefore, the study of microstructures and microbiological indicators of pasta from non-traditional raw materials will be relevant. The practical value of the research is characterized by improved consumer properties of pasta made from non-traditional raw materials. The novelty of the research is the development of scientific and technological bases for the production of pasta from non-traditional polycereal raw materials. The results obtained: the analysis of the obtained electronic micro-drawings showed that the microstructure of pasta from non-traditional raw materials corresponds to the standards in comparison with the control sample. The following types of mycotoxins were found in pasta from non-traditional raw materials in permitted quantities: aflatoxin B1, aflatoxin M1, zearalenone, deoxynivalenol, ochratoxin A, fumonisin, patulin, T-2. For example, the amount of zearalenone (mg/kg): in pasta according to recipe No. 1 – 0.0637, according to recipe No. 2 – 0.0251 and according to recipe No. 3 – 0.0758; in flour raw materials – according to recipe No. 1 – 0.1485, according to recipe No. 2 – 0.0261 and according to recipe No. 3 – 0.2

Experience with fibre channel in the environment of the ATLAS DAQ protoype "-1" project

Fibre Channel equipment has been evaluated in the environment of the ATLAS DAQ prototype "-1". Fibre Channel PCI and PMC cards have been tested on PwerPC-based VME processor boards running LynxOS and on Pentium-based personal computers running Windows NT. The performance in terms of overhead and bandwidth has been measured in point-to-point, arbitrated loop and fabric configuration with a Fibre Ch annel switch. The possible used of the equipment for event building in the ATLAS DAQ prototype "-1" has been studied

Optimization of PCR conditions to amplify microsatellite loci in the bunchgrass lizard (Sceloporus slevini) genomic DNA

<p>Abstract</p> <p>Background</p> <p>Microsatellites, also called Simple Sequence Repeats (SSRs), repetitions of nucleotide motifs of 1-5 bases, are currently the markers of choice due to their abundant distribution in the genomes, and suitability for high-throughput analysis. A total of five different primer pairs were optimized for polymerase chain reaction (PCR) to amplify microsatellite loci in total genomic DNA of bunchgrass lizards (<it>Sceloporus slevini</it>) collected from three sites in southeastern Arizona; the Sonoita Plain, Chiricahua Mountains and Huachuca Mountains.</p> <p>Findings</p> <p>The primers used for current investigation were originally designed for the Eastern Fence Lizard (<it>Sceloporus undulatus</it>). Five primer pairs were selected based on annealing temperatures for optimizing the PCR conditions to amplify with bunchgrass lizards. Different concentrations of DNA and annealing temperature were optimized. While keeping other reagents constant, a DNA concentration, 37.5 ng in the final reaction volume and PCR conditions of an initial denaturation of 94°C for five minutes, an annealing temperature of 55°C and final extension of 72°C for four minutes gave the best amplification for all the primer pairs.</p> <p>Conclusions</p> <p>Modifying the standard protocol for annealing temperatures and final extension time increases the success of cross amplification of specific microsatellite loci in the bunchgrass lizard. A loading volume of 5 ul DNA at a concentration of 10 ng/ul and a 2% agarose for gel electrophoresis were observed the best for cross amplification of selected five primer pairs on bunch grass lizard.</p> <p>Trial Registration</p> <p>The research was conducted with Arizona Game and Fish Department scientific collecting permits SP565256, SP657407 & SP749119 to Dr. Christian A d'Orgeix.</p

Genetic and phenotypic variation of the malaria vector Anopheles atroparvus in southern Europe

<p>Abstract</p> <p>Background</p> <p>There is a growing concern that global climate change will affect the potential for pathogen transmission by insect species that are vectors of human diseases. One of these species is the former European malaria vector, <it>Anopheles atroparvus</it>. Levels of population differentiation of <it>An. atroparvus </it>from southern Europe were characterized as a first attempt to elucidate patterns of population structure of this former malaria vector. Results are discussed in light of a hypothetical situation of re-establishment of malaria transmission.</p> <p>Methods</p> <p>Genetic and phenotypic variation was analysed in nine mosquito samples collected from five European countries, using eight microsatellite loci and geometric morphometrics on 21 wing landmarks.</p> <p>Results</p> <p>Levels of genetic diversity were comparable to those reported for tropical malaria vectors. Low levels of genetic (0.004 <<it>F</it>_{<it>ST </it>}<0.086) and phenotypic differentiation were detected among <it>An. atroparvus </it>populations spanning over 3,000 km distance. Genetic differentiation (0.202 <<it>F</it>_{<it>ST </it>}<0.299) was higher between the sibling species <it>An. atroparvus </it>and <it>Anopheles maculipennis </it>s.s. Differentiation between sibling species was not so evident at the phenotype level.</p> <p>Conclusions</p> <p>Levels of population differentiation within <it>An. atroparvus </it>were low and not correlated with geographic distance or with putative physical barriers to gene flow (Alps and Pyrenées). While these results may suggest considerable levels of gene flow, other explanations such as the effect of historical population perturbations can also be hypothesized.</p

Botulinum toxin injection versus lateral internal sphincterotomy in the treatment of chronic anal fissure: a non-randomized controlled trial

BACKGROUND: Although lateral internal sphincterotomy is the gold-standard treatment for chronic anal fissure, intrasphincteric injection of botulinum toxin seems to be a reliable new option. The aim of this non-randomized study is to compare the effect of lateral internal sphincterotomy and botulinum toxin injection treatments on the outcome and reduction of anal sphincter pressures in patients with chronic anal fissure. METHODS: Patients with chronic anal fissure were treated with either botulinum toxin injection or lateral internal sphincterotomy by their own choice. Maximal resting pressure and maximal squeeze pressure measurements were performed before and 2 weeks after treatments by anal manometry. Patients were followed for fissure relapse during 14 months. RESULTS: Twenty-one consecutive outpatients with posterior chronic anal fissure were enrolled. Eleven patients underwent surgery and ten patients received botulinum toxin injection treatment. Before the treatment, anal pressures were found to be similar in both groups. After the treatment, the maximal resting pressures were reduced from 104 ± 22 mmHg to 86 ± 15 mmHg in the surgery group (p < 0.05) and from 101 ± 23 mmHg to 83 ± 24 mmHg in the botulinum toxin group (p < 0.05). The mean maximal squeeze pressures were reduced from 70 ± 27 mmHg to 61 ± 32 mmHg (p > 0.05) in the surgery group, and from 117 ± 62 mmHg to 76 ± 34 (p < 0.01) in the botulinum toxin group. The fissures were healed in 70 percent of patients in the botulinum group and 82 percent in the surgery group (p > 0.05). There were no relapses during the 14 months of follow up. CONCLUSION: Lateral internal sphincterotomy and botulinum toxin injection treatments both seem to be equally effective in the treatment of chronic anal fissure

Time course of collagen peak in bile duct-ligated rats

<p>Abstract</p> <p>Background</p> <p>One of the most useful experimental fibrogenesis models is the "bile duct-ligated rats". Our aim was to investigate the quantitative hepatic collagen content by two different methods during the different stages of hepatic fibrosis in bile duct-ligated rats on a weekly basis. We questioned whether the 1-wk or 4-wk bile duct-ligated model is suitable in animal fibrogenesis trials.</p> <p>Methods</p> <p>Of the 53 male Wistar rats, 8 (Group 0) were used as a healthy control group. Bile duct ligation (BDL) had been performed in the rest. Bile duct-ligated rates were sacrificed 7 days later in group 1 (10 rats), 14 days later in group 2 (9 rats), 21 days later in group 3(9 rats) and 28 days later in group 4 (9 rats). Eight rats underwent sham-operation (Sham). Hepatic collagen measurements as well as serum levels of liver enzymes and function tests were all analysed.</p> <p>Results</p> <p>The peak level of collagen was observed biochemically and histomorphometricly at the end of third week (P < 0.001 and P < 0.05). Suprisingly, collagen levels had decreased with the course of time such as at the end of fourth week (P < 0.01 and P < 0.05).</p> <p>Conclusion</p> <p>We have shown that fibrosis in bile duct-ligated rats is transient, i.e. reverses spontaneously after 3 weeks. This contrasts any situation in patients where hepatic fibrosis is progressive and irreversible as countless studies performed by many investigators in the same animal model.</p

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20−-300 GeV/c

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.Comment: To be submitted to JINS

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation