Article Design Framework and Laboratory Experiments for Helix and Slinky Type Ground Source Heat Exchangers for Retrofitting Projects

The focus of the experimental work was on shallow spiral geothermal heat exchanger configurations. Real-scale experiments were carried out for vertically oriented spiral collectors (helix) in sand and soil. One objective was to develop a measurement concept in laboratory environment to create a framework for a validated database. This database serves as the basis for further and new development of engineering design tools. To achieve the highest possible data-point density in the observed environment, temperature sensors and a fiber-optic temperature measurement system (DTS) were used. Soil probes were taken in situ before and after the measurements and analyzed at a thermophysical laboratory to determine material properties. The heat flow was controlled by an electric heating cable, which was installed in the form of a spiral-shaped heat exchanger in a 1 m3 container. To guarantee constant boundary conditions, the measurements were carried out in a climate chamber at a defined ambient temperature. The evaluation of the transient response behavior is spatially resolved. The results are coordinate-based temperature points, which describe temperature gradients in all axes of the container over time, which are combined with known soil properties. The collected data was used to develop computational fluid dynamic (CFD) models, which are used to extend the variety of geometry and soil configurations for developing new design tools. Raw data available for download here

Vaginal dose point reporting in cervical cancer patients treated with combined 2D/3D external beam radiotherapy and 2D/3D brachytherapy

Traditionally, vaginal dose points have been defined at the vaginal source level, thus not providing dose information for the entire vagina. Since reliable vaginal dose volume/surface histograms are unavailable, a strategy for comprehensive vaginal dose reporting for combined EBRT and BT was established and investigated. An anatomical vaginal reference point was defined at the level of the Posterior-Inferior Border of Symphysis (PIBS), plus two points ±2 cm (mid/introitus vagina). For BT extra points were selected for the upper vagina at 12/3/6/9 o'clock, at the vaginal surface and 5 mm depth. A vaginal reference length (VRL) was defined from ring centre to PIBS. Fifty-nine patients treated for cervical cancer were included in this retrospective feasibility study. The method was applicable to all patients. Total EQD2 doses at PIBS and ±2 cm were 36.7 Gy (3.1-68.2), 49.6 Gy (32.1-89.6) and 4.3 Gy (1.0-46.6). At the vaginal surface at ring level doses were respectively 266.1 Gy (67.6-814.5)/225.9 Gy (61.5-610.5) at 3/9 o'clock, and 85.1 Gy (55.4-140.3)/72.0 Gy (49.1-108.9) at 12/6 o'clock. Mean VRL on MRI was 5.6 cm (2.0-9.4). With this novel system, a comprehensive reporting of vaginal doses is feasible. The present study has demonstrated large dose variations between patients observed in all parts of the vagina, resulting from different contributions from EBRT and B