Host Range of Meloidogyne Arenaria (NEAL, 1889) Chitwood, 1949 (Nematoda: Meloidogynidae) in Spain

11 páginas, ilustraciones y tablas estadísticas.The distribution of Meloidogyne arenaria in Spain was revised and new samples collected from representative areas. Species and races of the populations were determined by morphometrics, differential host tests and SCAR-PCR. Meloidogyne arenaria was found most often in warm areas, but it can occur in Northern Spain in greenhouses. A total of 125 citations were found, corresponding to 45 different host plants, of which 41 new reports (32.8%) are from this study. The populations studied belong to race 2, which reproduces on tomato plants carrying the Mi gene, or race 3, which reproduces on both resistant pepper and tomato. The most frequent hosts were vegetables, fruit trees, tobacco, grapevine, and weeds.INIA OT- 03-006C7-4 and RTA2007-00099-C00-00; Castilla La Mancha PAI09-0010-4701, INCRECYT CICyT CTM2006-07309.Peer reviewe

Epidemiological trends of HIV/HCV coinfection in Spain, 2015-2019

Altres ajuts: Spanish AIDS Research Network; European Funding for Regional Development (FEDER).Objectives: We assessed the prevalence of anti-hepatitis C virus (HCV) antibodies and active HCV infection (HCV-RNA-positive) in people living with HIV (PLWH) in Spain in 2019 and compared the results with those of four similar studies performed during 2015-2018. Methods: The study was performed in 41 centres. Sample size was estimated for an accuracy of 1%. Patients were selected by random sampling with proportional allocation. Results: The reference population comprised 41 973 PLWH, and the sample size was 1325. HCV serostatus was known in 1316 PLWH (99.3%), of whom 376 (28.6%) were HCV antibody (Ab)-positive (78.7% were prior injection drug users); 29 were HCV-RNA-positive (2.2%). Of the 29 HCV-RNA-positive PLWH, infection was chronic in 24, it was acute/recent in one, and it was of unknown duration in four. Cirrhosis was present in 71 (5.4%) PLWH overall, three (10.3%) HCV-RNA-positive patients and 68 (23.4%) of those who cleared HCV after anti-HCV therapy (p = 0.04). The prevalence of anti-HCV antibodies decreased steadily from 37.7% in 2015 to 28.6% in 2019 (p < 0.001); the prevalence of active HCV infection decreased from 22.1% in 2015 to 2.2% in 2019 (p < 0.001). Uptake of anti-HCV treatment increased from 53.9% in 2015 to 95.0% in 2019 (p < 0.001). Conclusions: In Spain, the prevalence of active HCV infection among PLWH at the end of 2019 was 2.2%, i.e. 90.0% lower than in 2015. Increased exposure to DAAs was probably the main reason for this sharp reduction. Despite the high coverage of treatment with direct-acting antiviral agents, HCV-related cirrhosis remains significant in this population

Production and processing of graphene and related materials

© 2020 The Author(s). We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resourceconsuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown

Outcomes from elective colorectal cancer surgery during the SARS-CoV-2 pandemic

This study aimed to describe the change in surgical practice and the impact of SARS-CoV-2 on mortality after surgical resection of colorectal cancer during the initial phases of the SARS-CoV-2 pandemic

Seguimiento de las guías españolas para el manejo del asma por el médico de atención primaria: un estudio observacional ambispectivo

Objetivo Evaluar el grado de seguimiento de las recomendaciones de las versiones de la Guía española para el manejo del asma (GEMA 2009 y 2015) y su repercusión en el control de la enfermedad. Material y métodos Estudio observacional y ambispectivo realizado entre septiembre del 2015 y abril del 2016, en el que participaron 314 médicos de atención primaria y 2.864 pacientes. Resultados Utilizando datos retrospectivos, 81 de los 314 médicos (25, 8% [IC del 95%, 21, 3 a 30, 9]) comunicaron seguir las recomendaciones de la GEMA 2009. Al inicio del estudio, 88 de los 314 médicos (28, 0% [IC del 95%, 23, 4 a 33, 2]) seguían las recomendaciones de la GEMA 2015. El tener un asma mal controlada (OR 0, 19, IC del 95%, 0, 13 a 0, 28) y presentar un asma persistente grave al inicio del estudio (OR 0, 20, IC del 95%, 0, 12 a 0, 34) se asociaron negativamente con tener un asma bien controlada al final del seguimiento. Por el contrario, el seguimiento de las recomendaciones de la GEMA 2015 se asoció de manera positiva con una mayor posibilidad de que el paciente tuviera un asma bien controlada al final del periodo de seguimiento (OR 1, 70, IC del 95%, 1, 40 a 2, 06). Conclusiones El escaso seguimiento de las guías clínicas para el manejo del asma constituye un problema común entre los médicos de atención primaria. Un seguimiento de estas guías se asocia con un control mejor del asma. Existe la necesidad de actuaciones que puedan mejorar el seguimiento por parte de los médicos de atención primaria de las guías para el manejo del asma. Objective: To assess the degree of compliance with the recommendations of the 2009 and 2015 versions of the Spanish guidelines for managing asthma (Guía Española para el Manejo del Asma [GEMA]) and the effect of this compliance on controlling the disease. Material and methods: We conducted an observational ambispective study between September 2015 and April 2016 in which 314 primary care physicians and 2864 patients participated. Results: Using retrospective data, we found that 81 of the 314 physicians (25.8%; 95% CI 21.3–30.9) stated that they complied with the GEMA2009 recommendations. At the start of the study, 88 of the 314 physicians (28.0%; 95% CI 23.4–33.2) complied with the GEMA2015 recommendations. Poorly controlled asthma (OR, 0.19; 95% CI 0.13–0.28) and persistent severe asthma at the start of the study (OR, 0.20; 95% CI 0.12–0.34) were negatively associated with having well-controlled asthma by the end of the follow-up. In contrast, compliance with the GEMA2015 recommendations was positively associated with a greater likelihood that the patient would have well-controlled asthma by the end of the follow-up (OR, 1.70; 95% CI 1.40–2.06). Conclusions: Low compliance with the clinical guidelines for managing asthma is a common problem among primary care physicians. Compliance with these guidelines is associated with better asthma control. Actions need to be taken to improve primary care physician compliance with the asthma management guidelines

Spain-Phase-out of Methyl Bromide in pepper production in Spain

En: Chapter 10. Case studies on commercial adoption of alternatives to MB. 10.2.1. Alternatives for preharvest (soil) uses. Case study 3. Spain-Phase-out of Methyl Bromide in pepper production in Spain. Report of Methyl Bromide Technical Options Committee (MBTOC). 2006 Assessment, pp. 341-344.Non-chemical alternatives to MB for soil disinfection in pepper crops have been evaluated and are being increasingly adopted in Spain. They show that integrating practices like biofumigation with fresh pepper crop residues, chicken manure and sheep manure, biosolarisation, and grafting on resistant rootstocks, can be as effective as MB for controlling plant parasitic nematodes and fungi. MB consumption in Spain has been reduced by 96% since 1997.9Peer reviewe

Comportamiento de Meloidogyne incognita sobre tomate y pimiento resistente en Uruguay

[ES] Para evaluar la influencia del sistema de cultivo en la selección de biotipos virulentos de Meloidogyne incognita en Uruguay, se estudió la virulencia de 33 poblaciones de este nematodo procedentes de invernaderos, tanto en monocultivo como en rotación, mediante bioensayos con cultivares de tomate y pimiento resistentes a M. incognita. Se encontraron 36,4% de las poblaciones virulentas a tomate y pimiento resistentes; 33,3% virulentas a tomate resistente, pero no a pimiento; 24,2% avirulentas a tomate y pimiento resistentes y el 6,1% restante presentó virulencia sólo a pimientos portadores de genes de resistencia. Se encontró una asociación positiva entre los monocultivo de tomate o pimiento con cultivares resistentes y la presencia de virulencia en las poblaciones de M. incognita. .[EN] The virulence of 33 populations of Meloidogyne incognita collected from greenhouses under monoculture and crop rotation was studied to evaluate the influence of the cropping system on the selection of virulent biotypes in Uruguay, using bioassays including cultivars of tomato and pepper, resistant to M. incognita .Over thirty six percent of the populations were virulent on resistant tomato and pepper; 33.3% were virulent on resistant tomato, but not on pepper; 24.2% were avirulent on resistant cultivars of tomato and pepper and 6.1% were virulent only on peppers carrying resistance genes. There was a positive association between monoculture of resistant tomato or pepper and the presence of virulent populations of M. incognita.Este trabajo forma parte de los proyectos INIA OT 03-006-C7-6 y AGL2002-04040-C05-01 AGR-FOR. Ana Piedra Buena es becaria de la Agencia Española de Cooperación Internacional (AECI-MAEC).Peer reviewe

Effect of Plant Extracts and Metam Sodium on the Soilborne Fungal Pathogens, Meloidogyne spp., and Soil Microbial Community

© 2020 by the authorsIn this field study, the fungicidal and nematicidal activity of two plant extracts (Larrea spp. (LR), Liquidambar spp. (LQ)), and an organosulfur soil fungicide metam sodium alone (MS), and a mix of LR and MS (LR + MS) was assayed under pepper cropping in southeastern Spain. Metam sodium treatments (MS and LR + MS) produced the highest crop yields and were more effective in controlling root-knot nematodes and fungal pathogens (Fusarium, Pythium, and Rhizoctonia solani) than the plant extracts treatments (LQ and LR). Furthermore, the effect of the metam sodium treatments applied negatively affected the soil microbial community, principally bacteria, but not fungi. These microbial community changes of the soil were principally observed after treatment application; the differences between the treatments were reduced at the end of the experiment, when recovery of the soil microbiota communities occurred.This study was supported by the Ministerio de Economía, Industria y Competitividad of Spain (RTC-2016-5489-2).Peer reviewe

Solid-Phase Micro-Extraction (SPME) in the early detection of potentially active volatile compounds from organic wastes used for the management of soil-borne pathogens

Artículo en prensa.The complex molecular assemblages were analysed in the soil gas phase after applying pine forest wastes (PFW) or sugarbeet vinasses (SBV) for soil-borne crop pests management. For this purpose, solid-phase micro-extraction (SPME) and gas chromatography (GC) were used coupled with mass spectrometry (MS). The organic wastes were applied either to Calcic Entisol or Haplic Arenosol moistened at field capacity and soil was covered with polyethylene sheet for 28-30 days to retain the volatiles. The PFW-treated soil mainly released volatile terpene hydrocarbons (trans-caryophyllene, â-myrcene and p-cymene), with a-humulene and ethylbenzotriazole prevailing in the untreated soil. After SBV application mainly alkyl compounds and alkylbenzenes were released, whereas cyclohexanone, limonene, butanone, acetic acid, camphor and benzaldehyde occurred in the untreated soil. Compound assemblages also depended on the increasing water saturation in terms of soil depth, with sulphur compounds prevailing in deep horizons. Our results showed that SPME can be directly applied to soils to provide valuable information on volatile products from organic amendments.The authors wish to thank Spanish Inter-Ministerial Commission of Science and Technology (CICyT) for the research project CTM2006-07309, Comunidad de Madrid for program S- 505/AGR-0312, and the Spanish Institute for Agriculture and Food Research and Technology (INIA) for the projects AT06-006-C7-4 and RTA2007-00099-00-00. Dr. Ana Piedra Buena has been contracted by the CCMA-CSIC via the I3P Program, which is funded by the European Social Fund.Peer reviewe